Condition: used, Functionality: fully functional, Two YUDO "Bold 3" hot runner units are available for sale. The unit has 12 hot zones and a 63A plug. Spare parts are still available, and a user manual is also available for this unit. Deln Uuev Smnaoucout L: 150 mm W: 100 mm H: 80 mm

Condition: used, Year of construction: 2007, Engel VICTORY 330/60 Tech (2007) Closure system: Hydraulic Closure force: 600 kN Tiebarless Delsv E I Twjn Uuucsut Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar

Condition: used, Year of construction: 2017, operating hours: 30,000 h, clamping force: 300 kN, screw diameter: 55 mm, displacement volume: 511 cm³, injection pressure: 1,620 bar, overall weight: 17,000 kg, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Dujln Usv R Hlpsuucot

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Dolnjwg Sgcj Uuucjut Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2025, Condition: new, compounder with segmented screws, 25 mm - 32 l/d Dsln Uuef Uc Uyoucjut with atmosperic degassing, melt pressure sensor and die-plate die-face pelletizer made from stainless steel, housing is swivelling lenght of granules is adjustable by means of the cutting speed This compounder is built to order.

Condition: excellent (used), Year of construction: 2008, Ferromatik Milacron Type: K-TEC 85-S Injection molding machine (85 tons) Serial number: 522500 Djln Uujvk Dbzoucout Year of production: 2008 Machine weight: 5500 kg Screw diameter: 25 mm Closing force: 850 kN Working hours: 24.386h.

Condition: used, Functionality: fully functional, The hot runner device CW 662 is a 6-way device from YUDO and is for sale, of course with a BA for the device. Dsln Uov Smmcjuucjut

Condition: excellent (used), Year of construction: 2018, Tempereigreat Main tech Type: 18WTR00016 Dsln Uuuovbg Tnsceut Year 2018 3 pieces available

Condition: excellent (used), Year of construction: 2008, operating hours: 53,000 h, clamping force: 2,800 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 590 cm³, injection pressure: 2,150 bar, injection weight: 570 g, BMB 280 T hybrid injection molding machine with electric closing and plasticizing Clamping force: 280 T Screw diameter: 55 mm L/D ratio: 25 Maximum material pressure: 2150 bar Injectable volume: 590 cm3 Injectable weight in PS: 570 g Plasticizing capacity: 65 g/sec Passage between columns (H x V): 630 x 560 mm Plate dimensions (H x V): 910 x 840 mm Mold thickness min / max: 200 / 650 mm Max opening stroke: 600 mm Dujln Uov Rzvveuucet 2 hydraulic cores Blow guns: 2 Weight: 13 tons

Condition: new, Functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Dsln Ujwg Sd Uouucsut Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2017, Condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Dusln Uuuovcynujcet

Condition: ready for operation (used), Used machine Injection molding machine Dsln Uju Ti Sreuucsut Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request.

Condition: used, Two Günther hot runner units are for sale, one with 15 channels. Dsln Uuusv Sml Sjcsut L: 470 mm W: 370 mm H: 150 mm Weighs approximately 4 kg Connector: 16 V/400 A

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Dujlnjikfmhe Uuucet

Year of construction: 2025, Condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Dueln Uujwg R Rtoucst

Condition: ready for operation (used), The Deltatherm temperature control device is for sale, of course with the device's operating instructions. All spare parts are still available from the manufacturer. Quantity: 1 piece/ price per device Medium: oil Heating output: 18KW Max. temperature: 200 degrees Pump flow rate: 100l/min Duolneiw H Ube Uuucot Discharge pressure: 3bar Dimensions, W: 400mm D: 765mm H: 1310mm Weight: 150KG

Condition: like new (used), 300 mm intermediate plate for Krauss-Maffei KM 800. Original Krauss-Maffei Dolsh Hlr Eon Uuucsut

Year of construction: 2014, Condition: excellent (used), For sale: Screw and barrel for Engel 750 injection unit. Screw Diam. 60 mm Duslnoiw Dt Ds Uuucet

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details Dusljp Audqen Uuucst CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: like new (used), Year of construction: 2014, operating hours: 37,000 h, Functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, injection pressure: 1.877 bar, injection weight: 980 g, spindle diameter: 70 mm, Krauss-Maffei 420-2000 CX Duoln Uuouk E R Tjucjt Krauss-Maffei injection molding machine. 420 tons of clamping force. Excellent condition, only 37K hours of work. Year 2014. MC5 touch control. Yaskawa Anthropomorphic 6-axis robot, safety grid and conveyor belt. 12 hot runner zones, 2+2 Noyos. Accumulators. The Injector is delivered RE-Conditioned by our technical team and in optimal working conditions. We can offer to your company the Start-up service with which we guarantee the operation. Technical Details WORKING HOURS 37.326 YEAR OF MANUFACTURE 2014 DISTANCE BETWEEN COLUMNS 800x800mm INJECTION VOLUME 1078 cm3 INJECTION WEIGHT 980 gr INJECTION PRESSURE 1877 BAR SPINDLE THICKNESS 70mm MINIMUM MOLD THICKNESS 380mm MAXIMUM MOLD WEIGHT 6700 Kg CLOSING POWER 4,200 kN

Condition: excellent (used), Engel CC100 complete control. Tested in our facilities and in good working order. Duolsuaf D Den Uuucst

Condition: reconditioned (used), We have a large stock of hydraulic valves for injection molding machinery. Duoln Uuuet Hfw Eecjt

Condition: like new (used), Year of construction: 2006, operating hours: 45,000 h, Functionality: fully functional, Engel Victory 1800/220 Tech Engel column-less injection moulding machine with 220 tons of closing force. Year of manufacture 2006. CC100 control. Working hours: 45,000. Spindle diameter 70mm. The injection moulding machine is delivered RE-conditioned by our technical team of experts and in optimal working conditions. We can offer your company the service of commissioning at your facilities. Deljvuqglon Uuucsut Technical Details + YEAR OF MANUFACTURE 2006 CLOSING POWER 2200 kN PLATE DIMENSIONS 960x830mm OPENING STROKE 755mm MAXIMUM DISTANCE BETWEEN PLATES 1050mm SCREW 70mm INJECTION PRESSURE 1735 Bar INJECTION VOLUME 1039cm3 WORKING HOURS 45,000

Condition: reconditioned (used), Year of construction: 2006, 160 tons Krauss-Maffei injection moulding machine built in 2006 with Sepro robot and transport-belt. Screw diameter 35 mm, 2 core pullers, 6 hot runner zones. This machine will be delivered " reconditioned " and can be shown under power ! Deln Ush Dh Dujuucjut

Year of construction: 2007, Condition: reconditioned (used), Krauss-Maffei 200 tons, year 2007, only approx. 38.000 hours ! Robot conection, 2 noyos en moving platen, 1 air-valve en fix platen. This machine will be deliveres complete checked repaired and tested and can be shown under power. Technical details DAYLIGHT MAX 1.050 mm MIN. MOULD HIGHT 350 mm DISTANCE BETWEEN TIE BARS (h x v) 560 x 560 mm PLATEN SIZE 915 x 915 mm CLAMPING FORCE 2.000 kN Duoljh Hi Dron Uuucet SCREW DIAMETER 55 mm INJECTION PRESSURE 2.387 bar SHOTWEIGHT 679 grms YEAR OF BUILDING 2007 INJECTION VOLUMEN 570cm3