Condition: excellent (used), Year of construction: 1997, Wide belt sanding machine HEESEMANN LSM 8, year of manufacture 1997 Laedpfx Aboxurxfo Njh

Condition: used, Year of construction: 1995, Frame grinding machine LÖWER Type LZ 1 Ledpfx Ajzynpkjb Nsah Working width 280 mm Working height 120 mm Arbor diameter 35 mm Table length 1100 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2005.09 261, overall weight: 12,500 kg, power: 180 kW (244.73 HP), input frequency: 50 Hz, input current: 350 A, input voltage: 400 V, Working machine. Planned dismantlig 2026-12 no manual or documents. Lasdpfxszu I Eho Ab Neh

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Lsdjzvnfwjpfx Ab Nsah Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data - Machine type: Edge sanding machine / oscillating belt sander Laodpfxsztxqfj Ab Noh - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm - Weight: approx. 165 kg Features - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Condition: used, functionality: fully functional, De Stefani MVT edge grinder Lajdpoznu D Refx Ab Neh 1 grinding unit Maximum workpiece height: 100mm Grinding unit motor: 2.5 kW Self-sharpening grinding unit Manual adjustment of the grinding unit Manual adjustment of the grinding unit angle Grinding unit with oscillation Feed speed adjustable via a variator Feed motor power: 0.74 kW

Condition: new, Year of construction: 2024, functionality: fully functional, UNITEK NICE 950 2N RKRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Sanding roller, rubber-coated, Ø 150 Finishing pad 50 mm Sanding belt motor power 15 HP Sanding belt speed 18/16 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning rollers Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 2 pcs. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Belt motor power 20 HP Automatic conveyor belt centering Oscillating cleaning blower, timer-controlled, 2 pcs. UNITEK NICE 950 1N KRT Laedpfx Abjznwp As Neh Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 1 pc. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Oscillating cleaning blower, timer-controlled UNITEK NICE 650 1N KRT Working width 650 mm Sanding belt size width x length 670 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/sec Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Self-centering of sanding belts using the system “ECO GEAR SYSTEM” Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness 2 rollers on infeed and outfeed table 1 dust extraction port Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Mobile cleaning blower for the sanding belt Warranty 12 months on spare parts.

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 2,000 kg, SCM Sandya 7S wide belt sanding machine Working width: 1100 mm Sanding height: 4–160 mm 1 metal sanding head, 11 kW 2 combi sanding heads, 11 kW Adjustable speed of the combi sanding head via frequency inverter Electric height adjustment Optical oscillation Ljdpfx Aszykr Ueb Njah Adjustable feed speed via variator: 3–17 m/min Vacuum pump Technical documentation and CE certificate Year of manufacture: 2004

Condition: used, Sandingmaster Upper Calibrator Roller and Pad Laodpfx Abewzavne Nsh

Condition: used, Year of construction: 2006, functionality: unexamined, SANDING LINE COMPOSED OF 3 MACHINES: LOWER WITH TWO PAD BELTS; UPPER WITH TWO PAD BELTS; LATERAL WITH ONE BELT AND TWO EDGE SANDING BELTS. FOR BEAMS UP TO 800x300 mm. INCLUDING INFEED AND OUTFEED ROLLER CONVEYORS. TOTAL POWER 34 kW. Lodpfx Asw E Eu Rjb Njah

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1280x2120x2050 mm Weight 1950 kg Total power requirement 21 kw Lasdpfxev A Hfgs Ab Njh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2850x2050x2200 mm Weight 5150 kg Total power requirement 78 kw Lodpev A Hfysfx Ab Nsah

Year of construction: 2025, condition: new, Dimensions (L/W/H) 940x640x136 mm Weight 96 kg Ljdpfxjv A Hzbe Ab Nsah Total power requirement 1,5 kw

Condition: used, Year of construction: 1991, Used machine Lajdow I Unkspfx Ab Nsh Used profile sanding machine of the company Arminius type ST 10 Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding Lodpfx Abew I Uvze Nsah • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Condition: used, total length: 1,700 mm, total width: 1,200 mm, total height: 1,700 mm, overall weight: 600 kg, grinding belt length: 3,000 mm, grinding belt width: 200 mm, power: 4 kW (5.44 HP), No. 04535 Two-sided edge sanding machine HÖFER BSM V pn / BSM 5 pn Used Double-sided edge sanding machine Lajdozg Itvspfx Ab Noh Drive motor 4 kW Oscillation motor 0.75 kW Belt speed 22 m/s Pneumatic belt tensioning Pneumatic height adjustment Belt dimensions 3000 x 200 mm Front sanding table 900 x 400 mm, pneumatically tiltable up to 45° Rear sanding table 900 x 400 mm, with veneer edge sanding device Transport dimensions approx. 1700 x 1200 x 1700 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, total width: 2,000 mm, total height: 2,020 mm, total length: 3,800 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,400 kg, working height: 900 mm, height adjustment type: electric, input voltage: 400 V, warranty duration: 3 months, passage width: 1,350 mm, sheet thickness (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness brass (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness steel (max.): 100 mm, Equipment: 1 contact roller unit, Ø 210 mm, rubberized 40 Shore, grooved Drive: 15 kW/87 Hz/29 A (11/19 kW motor) with frequency control / ECO-Drive, constant speed, with electric roller adjustment (SKF) and positioning prepared for the use of Scotch-Brite strips 1 sanding brush station with 3 vertical rotating units equipped with 2 horizontal rotating brushes each Tool: grit 150, No. 068087 Drive: 2.6 kW per unit Speed of the rotating units: 30-150 rpm, frequency-controlled. Cutting speed of the brushes: 5-20 m/sec, frequency-controlled. With electric height adjustment and positioning Laedpfxjzav Dqe Ab Noh Installed options: Automatic workpiece thickness adjustment (AWDM), automatic tool length correction, machine interior lighting (LED version), stepless feed rate 0.5-10 m/min, conveyor belt cleaning brush, conveyor belt control, conveyor table in vacuum version, vacuum control with vacuum sensor Touch screen: 9" Siemens TP900 Comfort Year of manufacture: 2017 Weight [kg]: 3400 kg Previous owner: 1 Availability: Short-term, by arrangement Optionally, the matching piping and extraction system (total CE) are available for the machine.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt Lasdpjzi Hwfefx Ab Njh • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm Ledpfx Ajzinlweb Njah - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm Lodpfxjzinpco Ab Nsah - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: used, Year of construction: 2005, functionality: fully functional, working width: 910 mm, grinding width: 910 mm, overall weight: 1,000 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, type of input current: three-phase, - After technical inspection - Czech production - Year of manufacture 2005 TECHNICAL SPECIFICATIONS: - Working width 910 mm - Height of workpiece 3-160 mm - Main motor 11 kW - Total machine power 12 kW Laedozinr Djpfx Ab Noh - Shoe - Electric height adjustment - Automatic star/delta switching - Ammeter - Oscillation using an opto-electronic sensor - Table positioner - Working pressure 5.5/7 bar - Two feed speeds 4.5/9 m/min - Rubber pressure rollers - Pneumatic disc brake for the main motor - Diameter of dust extraction nozzle 140 mm Machine dimensions: - Length 160 cm - Width 160 cm - Height 220 cm - Weight 1000 kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Ledszinvispfx Ab Noah Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: good (used), Year of construction: 1979, Belt grinding machine, type T 8 E, including dust collection system, Lasdpfx Aezldyieb Neh year of manufacture 1979, table size 2800 x 950 mm, belt dimensions: 7700 x 150 mm, working length: 2700 mm, 4 kW motor, with filter hose, weight approx. 600 kg. SUBJECT TO DIFFERENT VAT RATES Transportation possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: refurbished (used), Year of construction: 2026, Dear customers, we are currently offering a fully refurbished vertical belt sanding machine for model and mold making by F. Zimmermann. Here are the machine’s technical specifications: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Worktable: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Including angle stop Including sanding belts Foot emergency stop Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg The machine has been painted in RAL 7035 light grey, the sanding plate is completely new, the roller bearings have been replaced, and various other small parts have been exchanged. We have also installed a motor brake and several additional electrical components for enhanced machine safety. The machine comes with a 6-month warranty. Price plus VAT, which will be separately itemized on the invoice. If you have any questions, please feel free to contact us. Lajdpfx Abjzlh Udo Neh

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer you a fully refurbished profile belt grinding machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of a machine of the PS1 type: Table length: 650 mm Table width: 600 mm Rail width: 15 / 30 / 40 / 50 mm Belt length: 2,700 mm Grinding height: 350 mm Table swivel: 45 / 20° Voltage: 400V Power: 1.4 / 1.85 kW Speed: 1,500 / 3,000 rpm Belt speed: 12 / 25 m/s Dust extraction port diameter: 80 mm Dimensions: 1,200 x 2,450 x 1,500 mm Weight: 320 kg After the overhaul, the machines feature a revised electrical system including a motor brake, are painted in RAL 7035 light gray, have refurbished idler and drive rollers, and come with a complete set of accessories. We look forward to receiving your questions and inquiries. Laodpozlicvsfx Ab Njh