Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Iodpfxov Nhg So Ah Uoik Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: not inspected (used), Used machine Used vertical panel saw by Holz-Her, type 1210 Older model; suitable only for coarse cutting Iisdpjxviuasfx Ah Uok Technical data: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Maximum saw blade diameter 300 mm Motor power 4 kW Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Scoring circular saw blade, scoring circular saw blades Iijdpfx Aheb D I Ats Uek -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Condition: used, Year of construction: 1993, total height: 2,820 mm, total length: 6,200 mm, total width: 1,900 mm, - Year: 1993 - Documentation available: No - CE certificate present: No - Serial number: 22330 - Max. cutting height vertical [mm]: 2050 - Max. cutting height horizontal [mm]: 5600 - Min. saw blade diameter [mm]: 290 - Max. saw blade diameter [mm]: 303 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Automatic: Yes - Voltage [V]: 380 - Current consumption [A]: 10.3 Iodsx Eivcspfx Ah Ujik - Fuse [A]: 15 - Transport dimensions: 6200mm x 1900mm x 2820mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, Used machine Isdpfxex H Dauj Ah Ueik Year of manufacture: 1991 Equipment and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Saw blade diameter: 300 mm Motor: 4.4 kW Availability: approx. end of January 2026 Location: NRW

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. Iiedpfx Ahsv Hgb Ns Ujk tape length: approx. 1,700 mm + 2,700 mm cutting width: max. 2,500 mm cutting height: max. approx. 80 mm

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Iiodpfx Aswnr Ehjh Uok Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Suction connection Ø: 80 + 120 mm

Year of construction: 2002, condition: good (used), Brand Maggi Type Junior 640 Drive 400V Engine 3Kw 2800 rpm Maximum cutting height diameter 350mm 10cm Year of construction 2002 Ijdpfx Ahohuikts Ujik On original base A good fresh machine for long and trouble-free use

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg Iodpfx Ahjh U U S Rj Uoik

Condition: new, Year of construction: 2023, machine/vehicle number: MR005075, The Xenia 40 is the best-selling panel saw from the Xenia range. This is the M version, featuring electric height and tilt adjustment, with digital readout for both the saw blade's height and tilt angle. Price is for a ready-to-use machine, including cable, plug, and saw blades, ex Staphorst. Technical specifications: - Serial number: AB00031368 Iiodpfx Ahexlyyfe Usk

Condition: used, Year of construction: 2018, Striebig Compact Wall Saw – 2018 Model – Excellent Condition A rare opportunity to purchase a Striebig Compact Wall Saw, built in 2018 and meticulously maintained. Known for Swiss precision and robust build quality, this machine is perfect for accurate vertical and horizontal panel cutting in tight workshop spaces. Isdpfx Ajx Dh T Deh Ujik Key Details: Make/Model: Striebig Compact Year: 2018 Condition: Excellent – clean, reliable, and serviced Cutting Capacity: Ideal for full-sized sheet materials (MDF, plywood, laminates, etc.) Usage: Light-to-moderate – not heavily used Location: N18 Availability: Ready for collection from North London Features: Smooth, accurate vertical and horizontal cuts Space-saving design – ideal for smaller workshops Heavy-duty frame and guide rails Dust extraction port compatible Striebig is the gold standard in vertical panel saws, offering durability, safety, and unmatched precision.

Condition: used, Longitudinal circular saw Jrion Type HMS for precise longitudinal cuts in solid wood, board material and wood composites. Availability by arrangement from February 2026. cutting length: approx. 5,200 mm cutting width: about 700 mm Iedpjx D U Saofx Ah Ujik

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting Iedownrf Uopfx Ah Ueik - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: refurbished (used), Year of construction: 1994, Cutting area 4300 x 2240 x 80 mm with wooden back wall Ijdpfx Aewq Nf Djh Usik (has been completely repaired and renewed) 300 mm saw blade diameter 80 mm cutting depth 5.5 kW motor

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Iijdpfxjgzc Iys Ah Usk -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, Ijdpfeu R Sy Njx Ah Usik cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg Iodpfogylq Iox Ah Usik

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Iedpfxeu R S Akj Ah Uoik Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Iodpfx Aeu R S Dhoh Usik Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Iijdou R Sypspfx Ah Usk Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Iijdpevtrkiofx Ah Uek Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: excellent (used), Panel saw STRIEBIG COMPACT TRK 5207 C - used - Welded frame with extremely high rigidity, automatically retracting support grid, stable locking of the saw carriage at top and bottom, control panel at eye level ----- Technical data ----- Cutting length: 4,600 mm Cutting height: 2,070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Extraction connection diameter: 100 mm Required space (LxWxH): 5,716 x 1,500 x 2,814 mm Weight: 850 kg Quality information: - Folding support rails renewed - Fence bars renewed / overhauled - Complete basic inspection performed - Complete basic cleaning - Electrical system checked - Immediately ready for operation Iijdpfx Ahowyap Ee Usk

Condition: used, Panel saw ALTENDORF F45 - used - Iiedjw Nv I Ujpfx Ah Uok double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Iijdpjw Nx A Iefx Ah Usk Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm Ijdpfx Ahju R S Dbe Usik - new exhibition machine -