Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), overall weight: 3,000 kg, This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. The saw features a hydraulic clamping device that operates in both the vertical and horizontal directions. The roller conveyor on the feed side is 15 m long and is equipped with a manually controlled feed mechanism. On the discharge side, there is a 12 m long roller conveyor without a drive. • Working area – Ø / flat at 90°: 420 mm / 720 mm x 420 mm • Working area – Ø / flat at 75° left: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° left: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° left: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° left: 420 mm / 250 mm x 420 mm • Working area – Ø / flat at 75° right: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° right: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° right: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° right: 420 mm / 250 mm x 420 mm • Smallest material dimensions – Ø / flat: 10 mm / 10 mm x 10 mm • Smallest cutting length (90°): approx. 90 mm • Remaining cutting length (manual, 90°): approx. 90 mm • Cutting speed: 10–120 m/min • System/belt tensioning pressure: 95 bar • Connected load: approx. 9 kW • Voltage: 400 V, 50 Hz • Control/hydraulic valve voltage: 24 V DC • Current consumption: approx. 18 A • Fuse protection: 35 A Tsdpfx Asx D N Amom Tja • Cable cross-section: min. 4 x 6 mm² • Material support height: 800 mm Additional equipment • Silberland B 660 powered roller conveyor, 15 m (year of manufacture: 2010) • Chip conveyor (0.15 kW motor)

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1998) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 63191010041 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Todpfxszmy S Ro Am Tsa Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1996) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 6319 101 004 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Tedpfjzmy Sqox Am Tja Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), overall weight: 2,800 kg, total height: 2,600 mm, This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. • Working area (Ø / flat at 90°): 410 mm / 700 mm x 400 mm • Working area (Ø / flat at 75° left): 410 mm / 660 mm x 400 mm • Working area (Ø / flat at 60° left): 410 mm / 580 mm x 400 mm • Working area (Ø / flat at 45° left): 420 mm / 450 mm x 420 mm • Working area (Ø / flat at 30° left): 300 mm / 300 mm x 300 mm • Working area (Ø / flat at 75° right): 410 mm / 660 mm x 400 mm Todpfxozqa Tcs Am Tsa • Working area (Ø / flat at 60° right): 410 mm / 580 mm x 400 mm • Working area (Ø / flat at 45° right): 380 mm / 450 mm x 380 mm • Smallest material dimensions (Ø / flat): 20 mm / 20 mm x 20 mm • Smallest cutting length (90°): approx. 45 mm • Remaining cutting length, manual (90°): approx. 90 mm • Cutting speed: 20–140 m/min • System/belt tensioning pressure: 65 bar • Connected load: approx. 14 kW • Voltage: 400 V, 50 Hz • Control/hydraulic valve voltage: 24 V DC • Current consumption: approx. 36 A • Fuse protection: 50 A • Cable cross-section: min. 16 mm² • Material support height: 800 mm Additional equipment • Automatic feed and discharge • Chip conveyor (motor power: 0.09 kW) Dimensions Machine Depth 1850 mm

Condition: not inspected (used), Year of construction: 2008, machine/vehicle number: 6459103335, total height: 1,600 mm, total length: 2,500 mm, total width: 1,800 mm, Horizontal bandsaw machine KASTO KASTOtwin A2 - Availability: Immediately - upon agreement - Can be inspected while powered on: Yes Technical data: - Max. cutting range for round material: 260 mm (min. 10 mm) - Max. cutting range for square material: 260 x 260 mm - Max. cutting speed: 20–110 m/min - Control system: CompactControl Scope of delivery: - Chip conveyor - Operating manual Dimensions & weights: Tedpezqd Tgsfx Am Toa - Installation dimensions L x W x H approx.: 2,500 x 1,800 x 1,600 mm - Weight approx.: 1,700 kg If you have any questions or would like to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2004, cutting diameter 320 mm cutting width 320 x 320 mm saw band length 5.090x34x1,1 mm cutting speed 20 - 110 m/min feed length 750 einfach mm min. dia. 10,0 mm min. cut-off length 6,0 mm total power requirement 7,0 kW weight of the machine ca. 2.200 kg Tjdpfozluk Sox Am Toa

Condition: used, Year of construction: 1996, saw blade diameter 300 mm cutting diameter 100 mm capacity 45 degrees: flat 105 x 80 mm capacity 45 degrees: round 100 mm capacity 60 degrees: flat 80 x 70 mm capacity 60 degrees: round 90,0 mm dimensions of saw-blade 300 x 2,5 x 40 mm hole of sawblade 40,0 mm stroke 150 mm cutting speed 17 + 33 U/min voltage 400 V weight 340 kg range L-W-H 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable Tedjzl E Twspfx Am Tsa - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâ??s manual

Condition: excellent (used), Fully hydraulic circular saw machine for workshops and production. The material is clamped using hydraulic clamping cylinders. The control system offers simple machine operation. The angle can be adjusted using a vernier scale with a resolution of 0.1 mm. Tjdpfjzqmh Tjx Am Tsa The saw feed is controlled by a hydraulic cylinder, ensuring maximum cutting accuracy. If you have any further questions or require a different cutting range, please do not hesitate to call. We would be happy to show you the machine and demonstrate its capabilities. Technical data: Band saws KASTO Machine type GKS U Technical data Drive power, saw gearbox 1.6/2.5 kW Cutting speed 14/28 m/min Cutting range, round: 140 mm Cutting range, flat: 160x90 mm Saw feed, hydraulic Hydraulic Saw blade dimensions 425 mm Material support 1050 mm Machine dimensions Length/Width 1250x1205 mm Height 1900 mm Machine weight 980 kg Year of manufacture 1992 Accessories 3000 mm 1x Horizontal clamping cylinder Coolant system Protective hood Pin guide Height adjustment Pressure switch

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Tjdpfjxztfaex Am Toa Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), functionality: fully functional, Cutting capacity 90° round: ø260 mm Cutting capacity 90° square: 230 × 230 mm Cutting capacity +45° round: ø170 mm Cutting capacity +45° square: 150 x 150 mm Cutting capacity -45° round: ø230 mm Cutting capacity -45° square: 230 x 230 mm Cutting capacity 60° round: ø120 mm Cutting capacity 60° square: 110 x 110 mm Mitre cutting left/right: 45° / 60° Cutting speed: 35/70 m/min Feeder clamp stroke: 860 mm Tsdpfezi Ahmjx Am Toa Blade size: 3,150 × 27 × 0.9 mm 5" touch screen: Manually, Semi-automatic, Fully automatic Included: Cooling unit, Full automatic bandsaw, Additional bandsaw Country of origin: Italy Motor power: 1,5 - 2,2 kW Machine (L×W×H): 220 × 310 × 130 cm Machine weight: 1,500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Cutting capacity 90° rectangular: 280 x 220 mm Cutting capacity +45° round: ø230 mm Tedpozi Ackefx Am Tea Cutting capacity +45° rectangular: 220 x 200 mm Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Machine (L×W×H): 165 x 115 x 180 cm Machine weight: 475 kg

Condition: ready for operation (used), Cutting capacity, circular: 340 mm Tedpfjznvnkex Am Tsa Cutting capacity, flat: 340 x 290 mm Cutting capacity, square: 325 x 325 mm Saw blade dimensions: 600 x 52 x 2.5 mm Drive motor: 380 V, 6 kW Space requirement: 2100 x 2100 x 1470 mm Weight, approx.: 1840 kg

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING AND DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 sawing and drilling combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This sawing and drilling system is ideally suited for the cost-effective sawing, drilling, center punching, marking (scribing), and thread cutting of profiles and flat steel bars in the steel construction and steel trading industries. The Kaltenbach KDX-S drilling system is equipped with 3 drilling units, each with 26 kW of drive power and a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage), together with the T13 transport system, is designed for profile lengths up to 18 m. The comprehensive transport system for handling structural steel also features cross conveyors at the infeed and outfeed for the transverse transport of the sections. The CNC control system, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, providing the operator with a clear view. Tjdpfx Asymy Imem Toa The removal and ejection of the initial cut or the onward transport of the profile to the discharge area is performed by a gripper located after the saw. The Kaltenbach KBS 1010 DG – KDX-S 1015 sawing and drilling system combination consists of: STEEL PROFILE DRILLING SYSTEM Kaltenbach KDX-S 1015 MITER BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Condition: used, Year of construction: 1995, machine/vehicle number: 50493, FMB metal bandsaw machine with control panel and infeed/outfeed conveyor belts. Details: Brand: FMB Year of manufacture: 1995 Serial number: 50493 Seller: Werktoolmachines Germond, Izegem Design: horizontal bandsaw Todpjznb Uvsfx Am Tja Conveyor belts: 2 pieces (infeed and outfeed) Electrical rating: 400 V Condition: used The buyer is responsible for dismantling the machine; no tools are provided.

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm Tsdpfxjxcp Sfs Am Toa throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Tsdpfx Asznh Nmem Toa Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: ready for operation (used), Max. cutting height: 87 mm Max. cutting length approx.: 200 mm Tjdpfx Aoznh Hfsm Tsa Saw blade diameter max.: 250 mm Saw blade speeds via gearbox approx.: 90 - 4000 rpm Drive motor: 380 V, 1.2 kW Space requirement: 1050 x 750 x 1100 mm Weight approx.: 210 kg

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Tedpszpb Eqefx Am Toa

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW weight of the machine ca. 1,5 t Todpeu Rt Hdefx Am Tea dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 27 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. Todpfozp Iu Sex Am Tsa total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Year of construction: 1993, condition: ready for operation (used), controller manufacturer: SIEMENS, Metal Band Saw manufactured in 1993. This Friggi 2MF/AUT 800 x 800 2C features a cutting capacity of 800 x 800 mm and a round diameter of 800 mm. It is equipped with a powerful 7.4 kW saw blade motor and a hydraulic pump with a delivery rate of 58 L/min. If you are looking to get high-quality cutting capabilities, consider the Friggi 2MF/AUT 800 x 800 2C machine we have for sale. Contact us for further details. - Cutting Capacity (Rectangular): 800 x 800 mm- Cutting Capacity (Round Diameter): 800 mm- Front Minimum Cut: 105 mm- Rear Minimum Cut: 50 mm- Band Pulley Diameter: 900 mm- Blade Dimensions: 67 x 1.6 mm- Blade Length Range: 9,680 - 9,800 mm- Saw Blade Speed: 20 - 90 m/min- Saw Blade Motor Power: 7.4 kW- Saw Arm Movement Motor Power: 7.1 kW- Automatic Saw Arm Lowering Speed: 0 - 3000 mm/min- Hydraulic Pump Reservoir Capacity: 115 L- Hydraulic Pump Delivery Rate: 58 L/min- Hydraulic Pump Motor Power: 9.2 kW- Total Installed Power: 26 kW- Power Supply Voltage: 380 V- Frequency: 50 Hz- Machine Colors: RAL 6011 / RAL 2004- Control System: Siemens Simatic Panel / UniOP Panel- Included Equipment / Scope of Delivery: Hydraulic aggregate unit, standalone electrical control cabinet, control panel, material feed roller conveyor table Tedpfx Aeznazbsm Toa

Condition: used, Year of construction: 1989, functionality: fully functional, Kasto HBA 360 AU bandsaw incl. roller conveyor Cutting range: 360 mm Tsdjyxxfiopfx Am Toa Saw blade dimensions: 5334 x 32 mm Length: 2310 mm Width: 2600 mm Height: 1700 mm Weight: 2600 kg We are available for further questions.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 5850/3, saw blade diameter: 350 mm, Eisele Circular Saw Machine VMS 350 Tsdpfx Amezm Tivs Toa

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 21064627/F, saw blade diameter: 350 mm, saw blade speed: 3,500 rpm, rotational speed (min.): 1,700 rpm, rotational speed (max.): 3,500 rpm, MEP Circular Saw Cobra 352 MA Tedszm Threpfx Am Tja

Condition: excellent (used), Year of construction: 2016, operating hours: 4,742 h, "RSA High-Performance Sawing, Deburring, Cleaning, and Drying Center" for Steel Tubes The processing center consists of: 1) RSA Precision High-Speed Saw RASACUT SC 3000 with bundle loader 2) RSA transfer system between the RSA Precision High-Speed Saw RASACUT and the RSA Deburring System RASAPLAN XY 3000 3) RSA Deburring System RASAPLAN XY 3000 4) Extraction system/wet separator for the RSA Deburring System RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for tubes up to 6,200 mm TECHNICAL DATA Tube diameter: 6 mm to 55 mm Wall thickness: 1 - 6 mm Bar weight: max. 10 kg/m Material: steel Magnetism: max. 3 Gauss Output length: 6,200 mm Sawable lengths: 150 - 3,000 mm Restriction: Ø 6 – 7.9 mm max. length: 1,200 mm Ø 8 – 9.9 mm max. length: 1,500 mm Ø 10 – 12 mm max. length: 2,000 mm Length tolerance: Ø 6 - 49 mm +/- 0.2; Ø 50 - 55 mm +/- 0.25 Tedpfxjy E Iyps Am Tja SAW BLADE DATA Saw blade diameter: max. 315 mm Bore: 40 mm Auxiliary holes: 4 x 12 mm Pitch circle: 64 mm NEW PRICE: €390,000