Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm Ksdped Iip Sofx Abvelp table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: good (used), Year of construction: 2018, machine/vehicle number: 68892, Offer 26014 Hydraulic, Two-Column Guided Mitre Band Saw Automatic Machine Technical Data: - Automatic work cycle for cutting operation, hydraulic lifting / lowering of the saw frame, manual mitre adjustment with hydraulic clamping - Automatic material feed system, motorized mitre adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 - 150 m/min - Cutting pressure regulation, infinitely variable: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: - 30° to 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm Klodeytn Dispfx Abvop - Material feed automaton - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space (approx.): W 2300 x H 1750 x D 2200 mm - Weight (approx.): 1800 kg

Year of construction: 2011, condition: ready for operation (used), Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible. Kjdpfx Abjyttvwjvslp

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 350 mm, Semi-automatic circular saw machine for aluminium, wood, etc. Klodpfxeyrhz Ee Abvjp Manufacturer: MEP Model: COBRA 350 SX Year of manufacture: 1998 Saw blade diameter: 350 mm Cutting diameter: 120 mm Stroke: -- mm Working height: 930 mm Cutting range at 45°: round 120 mm Cutting range at 45°: square 180 x 70 mm Cutting range at 90°: flat 105 mm Cutting range at 90°: square 100 mm Saw blade: 350 mm diameter, 90 teeth, bore 32 mm, thickness 3.4 mm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.6 t Space requirement approx.: 2.3 x 1.7 x 1.8 m

Condition: excellent (used), Saw blade Ø: up to 450 mm Swivel range (mitre): 180° rotary table Cutting area – round material: 150 mm Cutting area – square material: 140 mm Hydraulic feed, steplessly adjustable with motorised mitre adjustment micro-spraying device roller conveyors, total infeed 5000 mm Kodpfeyu Nktjx Abvslp manual measuring device up to approx. 6500 mm

Condition: used, Year of construction: 2000, Solid Metora MB 330 metal band saw, renowned for its stable cutting performance and durable build quality. This model comes fully equipped with roller conveyors on both the left and right sides, a digital end stop, and a mist coolant system for efficient, clean, and precise cutting results. Kedpfsymzgkjx Abvslp Perfectly suited for cutting profiles, tubes, and solid materials in steel, stainless steel, aluminium, and non-ferrous metals. Ideal for workshops and production facilities requiring repeatable accuracy and reliability. Specifications: Throat depth: 520 mm. Maximum workpiece height: 320 mm. Saw band speed: 16 – 96 m/min. Saw blade dimensions (length × width × thickness): 4,600 × 32 × 1.1 mm. Cutting capacities: Round workpieces, 90° / 45°: Ø 320 mm. Round workpieces, 30°: Ø 250 mm. Square workpieces, 90° / 45°: 320 × 320 mm. Square workpieces, 30°: 240 × 240 mm. Maximum flat profile (90°): 500 × 320 mm. Maximum flat profile (45°): 330 × 320 mm. Maximum flat profile (30°): 320 × 230 mm. Dimensions: Saw machine: 2200 x 1400 x 1400 mm (LxWxH). Machine weight: approx. 800 kg. Roller conveyor (left): 5000 x 1000 mm. Roller conveyor (right): 7000 x 1000 mm. Total set length: 14000 x 1500 x 1400 mm.

Condition: excellent (used), MANUFACTURER: DANOBAT S. Coop. Ltda. YEAR OF CONSTRUCTION: 1988 SERIAL NO.: 35 POWER IN KW: 28 Table size: 2000 x 600 mm Kedpfx Aeyr S Tlebvelp Indexing table: 600 mm Automatic Feed / Creep / Cycle X-travel: 3000 mm Y-travel: 1 mm Z-travel: 650 mm Table length: 3000 mm Table width: 1000 mm

Condition: excellent (used), Year of construction: 2005, Saw band dimensions: 4400 x 34 x 1.1 mm Cutting range at 90 degrees: round – 335 mm Cutting range at 90 degrees: flat – 500 x 335 mm Cutting speed: 15–150 m/min Ksdpfeyrc Aqox Abvelp Machine weight approx.: 1,550 kg

Condition: excellent (used), Year of construction: 2020, Saw blade dimensions: 350x32x4 mm Kedpfjyrczmex Abvelp Vice: 180 mm 2 speeds: 1700/3400 rpm Cutting capacity at 90° round: 120 mm Cutting capacity at 90° square: 105 mm Cutting capacity at 90° flat: 180x70 mm Cutting capacity at 45° round: 120/110 mm Cutting capacity at 45° square: 100/95 mm Cutting capacity at 45° flat: 135x60 mm Power: 2.2 kW Weight: 225 kg On the COBRA 352 MA model (automatic vice), which comes fully equipped with base, the vices close automatically when lowering the saw head.

Condition: used, Year of construction: 1999, functionality: fully functional, Cutting range at 90 degrees: round 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 90 degrees: flat 400 x 260 mm Cutting range at 45 degrees right: round 250 mm Cutting range at 45 degrees right: square 240 x 240 mm Cutting range at 45 degrees right: flat 240 x 260 mm Cutting range at 45 degrees left: round 250 mm Cutting range at 45 degrees left: square 250 x 250 mm Cutting range at 45 degrees left: flat 290 x 250 mm Cutting range at 60 degrees: round 160 mm Cutting range at 60 degrees: square 160 x 160 mm Cutting range at 60 degrees: flat 110 x 260 mm Cutting range at 60 degrees left: round 190 mm Cutting range at 60 degrees left: square 190 x 190 mm Klodpfx Aoyrcy Asbvep Cutting range at 60 degrees left: flat 210 x 190 mm Space requirement approx. 1700 x 2000 x 1600 mm Machine weight approx. 960 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 400 mm, saw band length: 5,700 mm, stepless cutting speed hydraulic material clamping infeed automat chip conveyor coolant device roll conveyor Technische Daten: Schnittbereich rund / cutting range round 400 mm Schnittbereich vierkant /cutting range square 400x400 mm Mehrfachvorschub / multiple infeed 20000 mm Klsdpfstzkdgox Abvjp Schnittgeschwindigkeit / cutting speed 20-110 m/min. Sägebandlänge / dimensions of the saw band 5700x41x1,3 mm Antriebsleistung / drive capacity 8 kW Gewicht der Maschine ca. / weight 2700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 320 mm, cutting range round steel at 45°: 260 mm, stepless cutting speed hydraulic material clamping infeed automat coolant device roll conveyor manual swivable cutting frame for miter cuts Technische Daten: Schnittbereich rund 0° / cutting range round 0° 320 mm Schnittbereich vierkant 0° /cutting range square 0° 350x320 mm Schnittbereich rund 45° / cutting range round 45° 260 mm Schnittbereich vierkant 45° /cutting range square 45° 250x180 mm Schnittgeschwindigkeit / cutting speed 20-100 m/min. Sägebandlänge / dimensions of the saw band 3660x27x0,9 mm Antriebsleistung / drive capacity 3,9 kW Gewicht der Maschine ca. / weight 1825 kg Ksdpfxewvi Age Abvjlp Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Vertical circular saw (fully automatic) by Berg & Schmid VKS 370 VA. Kledoynnzwjpfx Abvjp The machine was in series production until recently and is in good condition. Numerous accessories are included (e.g. saw blades).

Condition: used, Year of construction: 1985, functionality: fully functional, total length: 1,800 mm, total height: 1,250 mm, total width: 650 mm, saw blade length: 650 mm, cutting range round steel at 90°: 400 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, cutting range flat at 90° (X-axis): 400 mm, cutting range flat at 90° (Y-axis): 400 mm, power: 4 kW (5.44 HP), Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Ksdpoymdizofx Abvjlp Cutting capacity rectangular: 380 x 300 mm 3 stroke rates: 40/62/90 strokes/min Saw blade dimension: 650x50x2.5 mm

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw. Kjdpfx Abjt Tqlbovjlp

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Kljdpfsyuyb Nsx Abvsp Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: used, Vertical band saw HESKA type ESA 4 make no. 681174 year of construction approx. 1985 roll diameter 420 mm Klsdpfsdzqrvox Abvjp throat 400 mm table size 500 x 500 mm cutting height 285 mm saw band length min. 3200 - max. 3400 mm Saw band speed gear stage (1) 15-140 m/min. Saw band speed gear stage (2) 150-1400 m/min. Motor power 1,5 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via PIV gear with hand wheel adjustment and 2 gear steps - saw table tiltable in 2 axes - machine light space requirement L x W x H 950 x 750 x 1820 mm weight approx. 500 kg good condition

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm cutting height 260 mm saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz Kjdpfed Nbk Tsx Abvelp - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: used, Vertical band saw MÖSSNER REKORD type SM 420 Machine No. 17010 Year of construction 1968 roll diameter 420 mm Ksdpfjdzqc Rsx Abvolp throat width 415 mm throat in height 265 mm table size 605 x 600 mm band speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm drive power 1,1 / 1,7 kW Mains connection 380 V 50 Hz - Saw band speed via 4 gear steps and 2 motor speeds - saw blade butt welding unit IDEAL BS 0-16 with shear and grinding stone - swivelling working table in 2 axes space requirement L x W x H 950 x 750 x 1900 mm weight 570 kg good condition

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm Kedjlqadhepfx Abvolp width without fence 800 mm weight approx. 750 kg good condition

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm Kjdpfjiv A U Esx Abvelp table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Kledpfx Aoifu Aysbvep saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: used, Year of construction: 2006, cutting diameter 650 mm saw band length . mm cutting width 1000 mm Cutting height 650 mm weight of the machine ca. 6,4 t Cutting speeds: 16–170 m/min Working area: approximately 670 mm Material support height: 700 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Klodpfjyqu Suox Abvjp About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds Kodpfx Abequzd Revelp - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. Ksdpfx Aedzp T Dsbvslp All other components and electrical parts for the construction of a new special machine are also available.