Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Tjdpfx Abe Adtyyouod Manufacturer: SAMUR Type: S-1000 Machine number: 186 Machine type: Metal bandsaw PERFORMANCE DATA Speed: 9–336 rpm WORK TABLE Table dimensions: 610 × 610 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 660 mm Height: 1,800 mm Weight: 500 kg EQUIPMENT Welded band device

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Tedpfe Afpylex Abujd Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 43817, Offer 26319 Technical data: - Cutting range at 90° (round): 50 to 420 mm - Cutting range (square): 420 x 420 mm - Saw band dimensions (approx.): 6280 x 38 x 1.3 mm Tedpo Agvk Sjfx Abujd - 6 cutting speeds: 16 x 105 m/min - Cutting pressure, continuously adjustable: 0 - 400 mm/min - Hydraulic material clamping - Material feed automation: 8 - 520 mm - Multi-stroke up to: 2080 mm - Minimum remaining piece length: 70 mm - Pre-selection of the saw band stroke height - Chip conveyor - Coolant system - Total drive power: 400 V / 7.5 kW - Space requirement (approx.): W 2900 x H 2700 x D 2400 mm - Weight (approx.): 2900 kg - Motorized feed roller runs: 3 x 2000 mm - Total weight of roller runs (approx.): 1200 kg

Condition: good (used), Saw blade diameter: 1310 mm Tjdj Afu S Tjpfx Abusd Cutting diameter: 440 mm Machine weight: approx. 7.5 tons

Condition: good (used), Year of construction: 2006, functionality: fully functional, A used, well-maintained cold cut-off saw “TRENNJAEGER”, model: TUS 470. The machine is suitable for burr-free cold sawing of profile, plate, square and round materials in straight and miter cuts. Can be swiveled on both sides from 90 degrees to 45 degrees to 30 degrees, with a digital angle display. - Cutting range with a saw blade diameter of 450 mm, 90° round/square/rectangular 140/110/290x40 mm - Cutting range with a saw blade diameter of 450 mm, 45° round/square/rectangular 140/110/190x40 mm - Cutting range with a saw blade diameter of 450 mm, 90° round/square/rectangular 130/110/130x40 mm - Maximum clamping range of the machine: 290 x 150 mm - Working height: 900 mm - Vertical and horizontal pneumatic clamps on the right and left sides - Two additional saw blades 450x4x50mm, 180 teeth - Micro-spray system Infeed roller conveyor 2000mm Todpfx Aoz Tdk Nobujd Outfeed roller conveyor equipped with a length stop Technical data and dimensions: 2000mm Subject to change.

Condition: good (used), Sawing and Drilling Machine KALTENBACH KDX 1215 and HDM 1432 Workpiece width: 1,200 mm Workpiece height: 500 mm Drilling diameter: 8 - 40 mm Number of drilling spindles: 3 pcs Spindle speed: 150 - 1,100 RPM Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 - 40 mm Spindle speed: 150 - 1,100 RPM Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid return: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Sawing unit Saw blade diameter: 1,430 mm Saw blade type: HSS segmented saw blade Saw blade dimensions: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid return: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of the drilling unit: 43.0 kW Tjdpfs Afumkox Abusd Total installed power of the complete drilling and sawing unit: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: ready for operation (used), functionality: fully functional, Sawing machine Kaltenbach KKS-400M saw blade diameter: 400 mm motor power: 1.8/2.7 kW sawing speed: 10/20 13/26 15/30 m/min feed rate: 0 - 1,000 mm/min rapid traverse forward/backward: 1,550 mm/min maximum working range: 130 mm working range for square material: 120 mm working range for flat material: 305 x 20 mm working range for round material: 130 mm minimum working range: 10 x 10 mm Todpfxjz Ayhds Abusd mitre range: 0° - 90° - 0° dimensions (L x W x H): 1,080 x 900 x 1,760 mm weight: 850 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation Todpfezwhwvjx Abuod - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: good (used), Year of construction: 1981, machine/vehicle number: 24802, functionality: fully functional, Used band saw Manufacturer: MÖSSNER Model: REKORD SSF /501 Year of manufacture: 1981 Tjdpfx Abo Aay Atsujd

Condition: good (used), Year of construction: 1995, EISELE circular saw Todpsz Imqyefx Abuod Model VME 350

Condition: used, Year of construction: 1966, functionality: unexamined, KASTO EBS 320 A – the machine was not used very often. Electro-hydraulic high-performance automatic bandsaw Machine specifications: Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: EBS 320 A Machine type: Electro-hydraulic high-performance automatic bandsaw Document version: Wiring diagram dated 12/1963; Year of manufacture: xxxx Functions and components Todjz Hxtwjpfx Abujd Sawing unit: Saw frame with guide unit Workpiece clamping: Clamping device / machine vise Material feed: Feed stand with feed slide and feed drive: Hydraulics / Drive: Gearbox Cooling system: Coolant system with submersible centrifugal pump and coolant line Operation / Electrical system: Control panel, switch panel and control cabinet Additional components: Multi-clamp device, material support Price basis: Net price plus (shipping costs on request) The bandsaw is located in the Frankfurt area.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The machine is currently undergoing refurbishment; updated photos will be provided. Cutting length: 5000 mm with 2 saw blades operating simultaneously (for extra-long cuts up to 10 meters). Windows 10 PC New saw motors Todj Afbrgjpfx Abusd Pneumatics largely new or refurbished With uninterruptible power supply Additional tensioner on the roller conveyor Swiveling material support Automatically positionable via a DC motor, movable saw unit on hardened linear guide rails Travel speed approx. 20 m/min. Minimum section length 335 mm (5 mm) Maximum cutting length 5350 mm (9000 mm) Saw blade drive: 2 x 3 kW, 400 V, saw blade speed 2650 rpm Automatic electronic miter adjustment as standard up to 22.5° outwards and 45° inwards via servo motors External and internal dimension cutting Robust construction and proven workmanship guarantee the highest dimensional accuracy. Extremely stable welded construction with chip collection drawers in the machine bed Particularly large cutting area due to 550 mm saw blades Hydropneumatic saw blade feed Clamping devices, horizontally pneumatic, 1 each on the left and right of the saw blade Roller conveyor, 1.5 m long, with additional material support at the end of the frame LUBETOOL timed spray device Pneumatic saw blade guard Operation via two-hand control according to BG regulations Suction nozzle for connecting a chip extraction system Includes 2 carbide circular saw blades, 550 mm Optionally also available with an integrated extraction system!

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-260009, Voortman VB 1050 Horizontal Band Saw Voortman VB 1050 CNC miter band saw with a length measurement system and a comprehensive transport system for processing structural steel sections. The used Voortman VB 1050 horizontal band saw is a high-performance CNC-controlled miter band saw for the precise and cost-effective machining of large steel sections in the steel construction and steel trading industries. This robust band saw is suitable for profile widths ranging from 60 to 1,050 mm and profile heights from 10 to 450 mm. With its infinitely variable, CNC-controlled miter adjustment to the left and right up to ±60°, it enables flexible straight and miter cuts on steel beams and various profile cross-sections. Technical Features and Equipment A key design feature of the Voortman VB 1050 is the movable saw table, which moves in sync with the saw blade’s position. This prevents the saw blade from colliding with the table structure during miter cuts. If necessary, the table lowers automatically to ensure unobstructed material transport. The machine is equipped with a Beckhoff CNC control system that allows the desired cutting angles to be programmed and precisely positioned. The robust machine design and the saw blade dimensions of 9,550 × 54 × 1.6 mm enable reliable machining even of large-dimension steel profiles. The equipment includes a length measurement system with a movable measuring carriage and a stop plate on the discharge side. With a maximum measuring length of 19,200 mm, the system is particularly well-suited for machining long steel beams. Technical Specifications – Voortman VB 1050 Machine Type: CNC Horizontal Mitre Band Saw CNC Control: Beckhoff Profile Width: 60–1,050 mm Profile Height: 10–450 mm Cutting range at 90°: 450 × 1,050 mm Cutting range at ±45°: 450 × 725 mm Cutting range at ±60°: 450 × 470 mm Mitre adjustment: Up to ±60° on both sides Mitre positioning: CNC-controlled, infinitely variable Band saw blade dimensions: 9,550 × 54 × 1.6 mm Maximum profile length: 19,200 mm Length Measurement System: Movable measuring carriage with stop plate Roller conveyor length: 22,000 mm Machine weight: approx. 8,500 kg without accessories Tedpfsyr Hp Iex Abusd Applications The Voortman VB 1050 is particularly suitable for steel construction companies and steel distributors that process large steel sections with varying cutting angles. The combination of CNC-controlled miter adjustment, a large cutting range, and a long length measurement system enables flexible use for both one-off jobs and recurring cutting tasks.

Condition: used, Year of construction: 1998, Used KASTO HBA 360/600 U horizontal band saw for sale Condition: good, used Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: HBA 360/600 U Year of manufacture: 1998 Robust, industrial-grade KASTO horizontal band saw designed for cutting metal stock. The machine is sold with a roller conveyor and a new Kyocera cutting blade. Technical specifications Max. cutting diameter for round stock: approx. Ø 360 mm Max. cutting dimensions for rectangular stock: approx. 360 × 600 mm Weight: approx. 1800 kg Todpoz Hixdsfx Abued Power supply: 400 V / 50 Hz / 3 phases Power according to machine data plate: 10 kW Rated current: 35 A Included accessories Roller conveyor New Kyocera cutting blade Additional information The saw is in good technical condition. There is a minor issue: sometimes the workpiece clamping function needs to be activated a second time for the clamps to properly secure the material. The machine is currently disconnected and ready for transport. The seller can assist with loading the machine onto a truck, but does not assume responsibility for any damage that may occur during loading. The machine is sold as is, without any warranty. If you have any further questions or require additional information, please do not hesitate to ask. Text or technical data may contain errors. The buyer must verify the technical data and specifications before purchasing the machine.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Type: HBS 2 Todpfe Afpyrex Abuod Year of manufacture: 2002 Saw blade length: 500 mm Power: 1.3 kW Stroke rate: 62 / 125 / min Cutting capacity approx. round: 210 mm Cutting capacity approx. flat: 240 x 190 mm

Condition: ready for operation (used), Year of construction: 1961, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: PEHAKA Type: USF 4R Year of manufacture: 1961 Machine type: Metal band saw SAWING DATA Roller diameter: 380 mm Overhang: 380 mm Workpiece height: 260 mm Table dimensions: 600 × 600 mm Cutting speed: 0–2,000 mm/min MACHINE DETAILS ELECTRICAL DATA Total power consumption: 1.5 kW Tsds Ad Iwyjpfx Abued DIMENSIONS AND WEIGHT Length: 1,200 mm Width: 1,000 mm Height: 1,900 mm Weight: 1,300 kg

Condition: good (used), Year of construction: 2001, Used band saw from MEP Tjdpfx Ajz Spxcobusd Type: Shark 270SC Capacity: 270 x 190 mm Double-sided miter cut capability Automatic lowering/raising and clamping

Condition: used, Year of construction: 2026, machine/vehicle number: 0101-260040, BEHRINGER EISELE VMS 350 – Vertical Metal Cutting Circular Saw The BEHRINGER EISELE VMS 350 is a robust, manually operated industrial metal cutting circular saw for precise cutting of steel pipes, profiles, and solid materials. The powerful worm gear with EISELE rotational balancer ensures low-vibration sawing, high cutting quality, and long saw blade life. The precise miter adjustment, simple operation, and integrated coolant system make it a reliable circular saw for steel construction, metalworking, and workshops. Key technical data: Saw blade diameter 350 mm Motor power 1.4 / 1.9 kW Speeds 17/34 or 34/68 rpm Cutting range 90° round Ø 120 mm Cutting range 90° rectangular 170 × 100 mm Tjdpj Afagcefx Abued Cutting range 45° round Ø 120 mm Miter adjustment Up to 45° on both sides, 30° to the right Material clamping / Feed Manually Dimensions (L × W × H) 895 × 665 × 1,750 mm Weight approx. 300 kg

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) Tsdpjwd Ugtsfx Abuod - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Bandsaw Design: Sturdy cast iron construction Machine Weight: approx. 1.5 t Working Area Roll Diameter: 500 mm Overhang: 1,050 mm Workpiece Height: 400 mm Work Table Table Size: 750 × 800 mm Table Tilt: ±40° Cutting Speed Cutting Speed Stage 1: 15–79 m/min Cutting Speed Stage 2: 67–305 m/min Cutting Speed Stage 3: 207–940 m/min Cutting Speed Stage 4: 2,350 m/min Tjdpfx As Aaz Spebusd Drive Variator Drive: infinitely adjustable Gear Stages: 4 Electrical Data Operating Voltage: 400 V Total Power Requirement: 5.5 kW Dimensions Space Required: approx. 2.4 × 1.0 × 2.2 m EQUIPMENT Band Tensioning Device Tiltable Work Table Rear Auxiliary Table Various Saw Band Guides Saw Band Grinding Device Work Light Foot Switch Accessories

Condition: not inspected (used), Undercut saw, manufacturer: Kaltenbach, type: KKS 400 KCH, serial number: 117166, year of manufacture: 1994, side guide, roller feed: 7,000 x 350 mm, saw blade diameter: 400 mm, hydraulic clamping system, coolant system. Todjz R Nctopfx Abuod

Condition: good (used), Year of construction: 1990, Used semi-automatic bandsaw machine from MEP Model: Shark 310 SX Todpfxs Aaz Iks Abusd Capacity: 310 mm Two cutting speeds

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Tjdpfexz Dqmex Abued

Condition: used, Year of construction: 1966, functionality: limited functionality, saw blade length: 450 mm, Manufacturer: KASTO Maschinenbau GmbH & Co. KG Tsdpfoz Hxu Iox Abued Model: UBS 240 A Machine type: Automatic bandsaw Saw blade dimensions: 450 × 40 × 2 mm Mounting holes: Ø 8.5 mm Coolant: Tank capacity approx. 40 l emulsion Cutting pressure: Adjustable via setting screw Workpiece clamping: Machine and feed vice Operating modes: Single cut and automatic operation with quantity preselection

Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm capacity 90 degrees: flat 500 x 400 mm saw band length 6220 x 41 x 1.3 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight ca. 250 - 300 kg/m Control MEBA NC coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. ca. 2250 kg range L-W-H 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - User-friendly NC dialog control * With plain-text display 5.7-inch CE panel * Program memory with 50 programs, each with 20 steps - Automatic material feed * Minimum cutting diameter .. Ø 5.0 mm * Residual piece length without bundle clamping .. manual 25.0 mm * Residual piece length without bundle clamping .. automatic 110 mm * Automatic movement of the clamping blocks - Rapid-feed lowering of the saw frame * With automatic material detection - Band saw speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Driven chip-clearing brush via friction wheel - Hydraulic full-stroke material clamping - Saw blade angled 3° relative to the material support surface Tedpfez Dkzuox Abued - Saw blade idler rollers with carbide guides - Manual saw blade tensioning - Removable coolant tank for easy cleaning - Operating instructions