Condition: new, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Dobemftv Rovapgqjut Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: ready for operation (used), Cutting range: 320/ 320x320mm, saw band dimensions: 3660x27x0.9mm, weight: 1.95t. Dusbvjn Uut Nsapgqjt

Condition: used, Functionality: fully functional, Krauss & Reichert RBO20 Band Saw Knife length: 3,55 Duobvaov Sk Nhopgqet Good working condition. Please check out our other listings as well.

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition Djbvapoiv A U Eogqjut

Year of construction: 1997, Condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min sawing of pipes in steel and greycast iron  with wall Debvapgeghy Azjqsut thickness of up to 22 mm  milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg

Condition: good (used), Year of construction: 1995, Functionality: fully functional, total height: 750 mm, total length: 450 mm, total width: 450 mm, Band saw machines - base frame Duebevzak Hovapgqjt with front flap Color RAL 6011 reseda green

Condition: new, IN STOCK -- Semi-automatic metal bandsaw machine with high cutting precision! With this machine, miter cuts up to 45° on the left and up to 30° on the right are possible (swivel range 45° on the left and 60° on the right) Technical data: ● Cutting range: - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0,9-1,5 kW / 400 V / 50 Hz ● Band saw speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0,9 mm Basic equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensors ● Easy and convenient clamping of the material via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, continuous adjustment of the saw for miter cuts Debvaemf T Hpepgqjut ● Electrical blade tension monitoring with saw blade breakage control

Year of construction: 2003, Condition: ready for operation (used), Rotational speed: 7-70/min, voltage: 400V. Dsbvapgjh Dw Tkjqeut

Year of construction: 1965, Condition: used, roll diameter 400 mm throat 390 mm workpiece height 240 mm saw band length 2980 mm table surface area 500x600 mm Dujbvjlp U Nieapgqst weight of the machine ca. 350 kg dimensions of the machine ca. 650x1100x1700 mm

Condition: used, Vertical band saw MÖSSNER REKORD type SM 420 Machine No. 17010 Year of construction 1968 roll diameter 420 mm throat width 415 mm throat in height 265 mm table size 605 x 600 mm band speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm Djbvaedzqc Ropgqsut drive power 1,1 / 1,7 kW Mains connection 380 V 50 Hz - Saw band speed via 4 gear steps and 2 motor speeds - saw blade butt welding unit IDEAL BS 0-16 with shear and grinding stone - swivelling working table in 2 axes space requirement L x W x H 950 x 750 x 1900 mm weight 570 kg good condition

Year of construction: 1997, Condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min Debvapjd Srdxogqsut sawing of pipes in steel and greycast  iron with wall thickness of up to 22 mm milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg  

Condition: new, Year of construction: 2001, Functionality: fully functional, total height: 750 mm, total length: 500 mm, total width: 450 mm, Machine base for FEMI band saws Dobvapjvzakasgqsut Height 75cm Width 45cm Length 50cm available in multiple versions

Condition: excellent (used), Cross-cut saw Velox 350 with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kw, 380 Volt 2 speeds Double miter cuts possible Duobvapst Ta Urogqjt

Year of construction: 1980, Condition: ready for operation (used), Cutting range round/ square: 400mm, cutting speed: 12-100m/min. Dusbvajh I Egmopgqot

Year of construction: 2016, Condition: new, cutting capacity - round Ø 150 mm Ø 75 mm 150x125 mm 70x50 mm 125 mm Duobvapgjlp U T Hoqst 50 mm speeds steplessly adjustable 25-138 m/min total power requirement 1,8 kW weight of the machine ca. 35 kg

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm Debvsd N H A Noapgqsut weight of the saw approx. 1400 kg good condition

Condition: used, Horiz. Mitre bandsaw KNUTH with minimum quantity lubrication type HB 250A Bandsaw for metalworking with swivel saw frame. Serial no. 201603004 Year of manufacture 2016 Sawing range at 90° round Ø 225 mm Sawing range for 90° square 190 x 190 mm Sawing range for 90° rectangle 245 x 150 mm Sawing area at 45° round Ø 145 mm Sawing area for 45° square 145 x 145 mm Sawing area for 45° rectangle 200 x 145 mm Sawing area at 60° round 90 mm Sawing area at 60° square 90 x 90 mm Sawing area for 60° rectangle 110 x 70 mm Saw band 2480 x 27 x 0.9 mm Roller diameter 290 mm Belt speed 45 / 90 m/min. Compressed air requirement approx. 5 bar (minimum quantity lubrication) Working height 910 mm Motor power 1.1 kW Connected load 400 Volt, 50 Hz - Saw blade speed via 2-stage electric motor - Infinitely variable lowering via hydraulic lowering cylinder - Automatic limit stop after material average - Infinitely variable swivel saw arm for mitre cuts up to 60° - Pressure gauge for band tension - Vice with short-stroke quick clamping device - Coolant device with electric pump - Minimum quantity lubrication UNI-Microspray I (year of manufacture 2017) - Workpiece stop Space requirement L x W x H 1450 x 700 x 1450 mm Weight 185 kg Very good condition Djbsrvm Npsvapgqjut

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages Debvasifu Ayspgqout - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: used, NC multi-blade - double blade saw for light metal MIKSITZ Year of manufacture 1991 For cutting to length and sawing in aluminum profiles Saw blade movement 500 mm Cutting height max. 100 mm Saw blade speed approx. 5000 rpm Saw blade diameter installed 300 mm Saw blade diameter max 400 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz Table size 1100 x 1100 mm Table cut-out 300 x 1100 mm Working height approx. 1100 mm Dobvapodzp Snjgqjut Tool holder SK40 - several saw blades can be clamped on a working shaft with bearings on both sides - a long arbor SK40 serves as the working shaft - Belt drive between drive motor and saw shaft - table height adjustable via crank (for the cutting depth) - fixtures and stops can be mounted on the table - Saw blade movement via ball screw with servo motor - Single-axis NC control for the cutting movement LENORD + BAUER type GEL 7541.0000 - adjacent control cabinet Space requirement L x W x H 1800 x 1600 x 1700 mm Weight approx. 1100 kg

Condition: used, Mitre circular saw EISELE type VMS 300 Machine. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing area at 90° (round) Ø 100 mm Sawing area at 90° (flat) 120 x 80 mm Sawing range at 45° (round) Ø 90 mm Sawing area at 45° (flat) 80 x 80 mm Saw blade diameter Ø 300 mm Saw blade speed 40 / 80 rpm 2 speeds Mitre cut +45° to 90° to -30° Motor power 1 and 1.2 kW Mains connection 400 Volt, 50 Hz - Coolant device - Mounted saw blade Ø approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Duobvoqylk Heapgqjt weight 212 kg very good condition

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg Debvequzd Reapgqout good condition

Condition: used, Column-mounted semi-automatic bandsaw METORA - KALTENBACH type HMB 380 DS only for 90° cuts (Made in Austria) Machine. No. 4580028 Year of construction approx. 1993 Cutting area round Ø 380 mm Square 380 x 380 mm Saw blade dimensions 5650 x 34 x 1.1 mm Saw blade speed 25-108 m/min. infinitely variable Material infeed height 870 mm Hydraulic drive power 1.5 kW Saw motor drive power 4 kW Mains connection 400 Volt, 50 Hz - Fully hydraulic band saw in two-column design - Hydraulic saw arm lowering with infinitely variable cutting pressure adjustment - Infinitely variable lowering speed - Hydraulic vice clamping, bundle clamping - Hydraulic unit integrated in the machine base frame - Material feed roller on the infeed side with geared motor - Coolant unit with cooling lubricant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for cooling water and hydraulics - TRENNJAGER type EX-Stop1 cross-cut fence, with handwheel adjustment, digital display and hydraulic fence carriage clamping Fence overall length 6750 mm, fence travel 5650 mm, fence arm can be folded up hydraulically without roller conveyor Space requirement of the basic machine L x W x H 2800 x 1400 x 2450 mm Weight of the machine approx. 3 tons Dujbvasdzqtgopgqet Weight of the stop system approx. 800 kg good condition

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Dusbvapgeuqgbtoqot Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Dujbvapgedzp T Deqet Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, Mitre cut sawing machine for steel construction Column-guided mitre cut band saw semi-automatic PEHAKA Type HS 620 / 1000 GBS Machine. No. 39093 Year of construction 1995 / Electrically overhauled in 2011 Cutting range round at 45-90° Ø 650 mm Cutting area flat at 90° 1010 x 650 mm Cutting area flat at 75° left 950 x 650 mm Cutting area flat at 60° left 830 x 650 mm Cutting area flat at 45° left 650 x 650 mm Cutting area flat at 30° left 410 x 650 mm Cutting area flat at 75° right 950 x 650 mm Cutting area flat at 60° right 830 x 650 mm Cutting area flat at 45° right 650 x 650 mm Saw blade dimensions 10480 x 54 x 1.6 mm Saw blade speed 14-160 m/min. infinitely variable Smallest remnant length / clamping length 80 mm Clamping vice clamping range 0-1010 mm Material infeed height 840 mm Hydraulic drive power approx. 2.2 kW Saw motor drive power 5.5 and 7.8 kW (pole-changing) Mains connection 400 Volt, 50 Hz, approx. 15 kW - CNC control SIEMENS S7 with touch panel, electrically overhauled in 2011 - Saw band speed via 2-step drive motor and infinitely variable speed adjustment - Fully hydraulic band saw in two-column design - Hydraulic saw arm lowering with infinitely variable cutting pressure adjustment - Infinitely variable lowering speed - Mitre adjustment via motorized swivelling saw unit, with angle setpoint specification via the control unit and actual value digital display - Working height button for increased lowering speed before the saw engages - Hydraulic double vice clamping - Hydraulic unit on the bracket of the saw unit - Motor-driven saw blade cleaning brush Ø 80 mm - Driven material feed rollers on the infeed and outfeed side with geared motor - Coolant device with cooling lubricant pump for water emulsion (not used) Debvajtt Uffjpgqsut - Minimum quantity lubrication for the saw blade - Chip conveyor with motor drive inserted in the machine bed - Controlled cross-cut fence up to 9000 mm with motor-driven swivel-up material fence Fence overall length approx. 9700 mm, fence travel 9000 mm, - Infeed roller conveyor with roller drive 15.5 meters, roller width 1000 mm, total width 1500 mm 20 rollers Ø 90 mm, rollers driven by geared motor, overall height 840 mm, load 400 kg/m - Outfeed roller conveyor 10 meters, roller width 1000 mm, 15 rollers Ø 90 mm, height 840 mm, + cross conveyor Space requirement of the sawing unit L x W approx. 27 x 6 meters Transport space requirement of the sawing unit L x W x H approx. 560 x 300 x 330 cm Weight of the sawing unit approx. 9 tons Transport space required for the infeed roller conveyor Length 13.5 meters x width 3 meters x height 140 cm Weight of the infeed roller conveyor approx. 8 tons (transport in one piece with 2x auxiliary beams for stabilization) Transport space requirement of the stop roller conveyor Length 10.5 meters x width 3 meters x height 200 cm (6 cross conveyors are separated at 3 meters width) Weight of the stop roller conveyor approx. 8 tons (transport in one piece with 2x support beams for stabilization) good condition