Used Straightening-, and bending machines for sale (57)

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t Hfjdot Hw Amspfx Ag Njn dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: excellent (used), pressure 6,3 t throat 200 mm stroke 200 mm Hedpfxowuu A Ae Ag Nefn dayligth max 500 mm table surface area 450 x 420 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15914, PRESS RUNNER MACHINE TYPE: EPT63 YEAR BUILT: 1999 MACHINE NUMBER:15914 Hsdpfx Asrypfysg Nefn MACHINE DATA Pressing force: 630 KN Idle noise: 69.2 dB Drive power: 22+4 KW Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil quantity: 285 liters. Weight: 6000kg TRAVEL DISTANCE MEASUREMENT: Overtravel: 20mm Follow-up time: 90ms Safety distance: 180mm DIMENSIONS: Installation height max: 600mm Ram stroke max: 400mm Throat: 280mm Table height: 850mm Table width: 630mm Table depth: 500mm

Year of construction: 1991, condition: good (used), Hydr.horizontal straightening and bending press Pressure capacity max.160 t Hfodscffzaspfx Ag Njn MAE Type:HY RI 160 RH Year.1991. For more data see data sheet.

Condition: new, Year of construction: 2019, pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Hedpfxod Ttyds Ag Nefn Total weight, approx.:26 t

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). Hfedpfsf Sqckex Ag Non The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm stroke 200 mm Hjdpfx Agjt Hwwds Nsfn total power requirement 10 kW weight of the machine ca. 4.500 kg dimensions of the machine ca. m

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment Hjdpfx Agjdk H A Io Nofn - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 5,5 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: excellent (used), Year of construction: 1970, pressure 6 t throat 250 mm stroke 550 mm table surface area 650 x 500 mm total power requirement kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,2 x 1,0 x 2,8 m Hfedevpaadjpfx Ag Nsn

Year of construction: 1975, condition: good (used), machine/vehicle number: MA1120, Weight [kg] Approx. 7000 Connected load 380V / 5,5 PS Hfedeg R Iwbspfx Ag Nen Stroke [mm] 300 Gear [rpm] 1450 Table size [LxW] 500/600 Accessories Operating instructions / Circuit diagrams / Hydraulic diagrams / Press test manual

Condition: new, Year of construction: 2018, machine/vehicle number: DF0230, pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm Hfjdpfxofxyklj Ag Nsn table speeds:30 mm/sec

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. Hedpfeufhzvsx Ag Nefn This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)

Condition: used, Year of construction: 1989, plate width:150 mm no. of straightening rolls:4 number of draw-in rolls:2 vorne+ 2 hinten roll diameter:60 mm dimensions of the machine ca.:1,8 x 0,7 x 1,4 m all rollers driven and individually adjustable, positioning via digital counter display, with 2 each introduction roller cages right and left Hfedocxxvmspfx Ag Nsn

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press Hedpfod A Nc Dox Ag Njfn - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 29-5843, pressing force: 200 t, table length: 3,100 mm, Schiavi Macchine STPC 4-axis press brake (X-R-Y1-Y2), year 1991, used, sold as seen. Optionally, a complete overhaul with new Titano CNC and new front safety device from the manufacturer can be provided. TECHNICAL SPECIFICATIONS STP-C 203 Pressing force: 2000 kN Table length: 3100 mm Hedpfx Aow Afrqjg Nsfn Distance between uprights: 2520 mm Throat depth: 320 mm Stroke: 200 mm Daylight between tables: 450 mm Number of intermediates: 15 Mass: 13,000 kg Approximate overall length: 3900 mm Oil capacity: 150 L Approximate overall width: 1415 mm Approximate overall height: 3000 mm Year of manufacture: 1991 Serial number: 012-5062

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Hjdpfxjrvz A Sj Ag Nefn Weight Kg 200

Condition: new, machine/vehicle number: DF0177, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm power capacity:25 kW Hodjfxyhiepfx Ag Nsfn work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 201805015, working length: 4,100 mm, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 185 t, overall weight: 18,000 kg, space requirement height: 3,440 mm, table length: 4,100 mm, installation height: 500 mm, Lightly used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market. This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system - G-CS active crowning system Hodpfx Aewync Heg Nefn - 6 axes (Y1-Y2-X-R-Z1-Z2) - Dual pump system: one main power pump and one pump dedicated to the crowning system - DSP AP safety system - Touchscreen control panel on the electrical cabinet - Sliding front supports - Touchscreen CNC control - Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)

Year of construction: 2023, condition: new, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. Hfjdpjfh R Nyefx Ag Non The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Interior light : mm 1,010

Condition: new, machine/vehicle number: DF0178, pressure:500 t table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm table height:700 mm :inklusiv ? :inklusiv ? :inklusiv ? Hfjdsfxyh Uopfx Ag Njn :inklusiv ?

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, working length: 2,550 mm, feed length X-axis: 600 mm, feed length Y-axis: 250 mm, feed length Z-axis: 150 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 80 t, overall weight: 7,300 kg, space requirement height: 2,850 mm, table length: 2,550 mm, HFBs 80.25 (80 tons 2.5m), 7 axes (X1-X2-R-Z1-Z2-Y1-Y2), year 2012, fully overhauled by the manufacturer. HFBs press brakes represent the most technologically advanced model in the automation of the bending process. Combined with dedicated hydraulics and next-generation software, the HFBs series models provide companies in the sheet metal working sector with the means to increase their competitiveness. Hjdpfx Aswylpqjg Nofn

Year of construction: 2023, condition: new, OMCN P30/SA hydraulic press with 2-speed hand pump, 30 ton. OMCN P30/SA hydraulic press with manual operation by two-speed hand pump and sturdy basement structure that provides maximum stability and minimum floor space. Thanks to the perforated frame, the support base can be adjusted in height to 9 different positions so the press can be adapted to work with parts of different sizes. The winch allows the pallet to be lifted conveniently and quickly. +rapidity in approach +precision Hjdpfx Agoklyvts Njfn Indispensable on the shop floor and in the industrial sector, perfect for pressing metal objects, such as during assembly of mechanical assemblies, keying of bearings or pulleys onto shafts. Made in Italy and CE certified press made of sturdy materials that ensure reliability over time and is capable of generating a force of 30000 kg. Overall dimensions 2180 x 1300 x 600 mm Weight 280 Kg Pressure 30 tons Distance between shoulders 695 mm Piston stroke 190 mm Piston diameter 60 mm

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm Hfjdpsfxygwofx Ag Non pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. Hedpfx Asfh R N Dsg Njfn The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: new, Year of construction: 2019, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar Hfsdofxyigspfx Ag Nen