Used veneer presses for sale (135)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, Shelf length: 3000 mm Shelf width: 1300 mm Clearance: 400 mm 6 hydraulic cylinders Piston diameter: 85 mm Machine control via touch panel Built-in electric oil heating Electric time-controlled opening Safety breakaway cable Year of manufacture: 2025, NEW Control system: logic control Overall dimensions: Length: 360 cm Width: 160 cm Fedpfjy N Rczjx Anyogd Height: 203 cm

Condition: like new (used), functionality: fully functional, - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm - Number of pistons: 6 Fedpfxoy N Rcuo Anysgd - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: ready for operation (used), functionality: fully functional, plate length 3500mm Fgedpfx Anoy N Rcneysd plate width 1300mm two inserts water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm span between plates max 460mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm plate width 1300mm Fgodoy N Rchjpfx Anyod oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm pressure 3kg/cm2 pump motor power 2,2kW

Condition: used, with new Mylar film used, in good condition Brand: Joos Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Fgodpfxjww Nd Ho Anysd Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, number of cylinders: 10, working width: 1,400 mm, cylinder diameter: 85 mm, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil EQUIPMENT System with pre-feed conveyor belt System with outfeed table Fgsdpfx Aoyqybhenyjd Safety standard: CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: excellent (used), Shelf length: 250 cm Width: 130 cm Fedpfoxgnp Djx Anysgd Four actuators

Condition: used, Veneer press OTT Fedpfx Aovdaymsnyjgd Type JU 60S Pressing area max. 225x120 cm Electric

Condition: new, Year of construction: 2023, pressing force: 120 t, total length: 3,000 mm, total width: 1,300 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, opening width: 400 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons * maximum heating temperature 120 degrees * logic control system * machine control from touch panel * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production Fgedequ U Hqjpfx Anyod * heating medium: oil with built-in heater. Machine brand new, available from stock.

Condition: good (used), HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 Fgjdpfx Aom Ud Dfsnyed specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000

Condition: good (used), Year of construction: 1990, 1x HOT PRESS for VENEER “SORMEC” TYPE 350X130 Hydraulic hot press for wood, panels, furniture, doors, composites, and various materials Technical data: Platen dimensions: 3500 x 1300 mm 1 USEFUL WORKING PLATE Platen heating by hot water Fgjdpfx Aneyv Izbjyjd Total pressure: 50 tons Opening: 300 mm 8 cylinders, diameter 85 mm Water boiler not included Overall dimensions: 4500 x 1600 x 2500 mm (H) Weight: approx. 5000 kg Second-hand, in good condition

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Fgsdsyxp Twjpfx Anyed Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing Fedpfx Asyz T Anenysgd 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: excellent (used), Technical specifications: Number of pistons: 6 Piston diameter: 140 mm Connection to central heating Shelf dimensions: 3500x1300 mm Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm Fgjdpjw U Nvpjfx Anysd

Condition: ready for operation (used), Shelf length 2500 mm Fedpeyynzpefx Anysgd Shelf width 1200 mm 4 hydraulic pistons 75 mm Clearance 400 mm Water heating

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Hydraulic Press Working area: 3000x1300mm Opening width: 400mm 6 cylinders with a diameter of 85mm Total pressing force: 105T Maximum heating temperature: 85 degrees Celsius Logic control system Machine control via a touch panel with readouts: Temperature, pressing force, platen opening time, load area calculation, process programming for gluing Power: 21KW CE certified Manufactured in 2022 Machine available on order Machine is new Fgsdpfx Ajimwp Sonyjd

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 W Hydraulic Veneer Press Working area: 3000x1300mm Opening width: 400mm 6 cylinders with a diameter of 85mm Total pressure: 105T Maximum heating temperature: 85 degrees Logic control system Fgedpfx Ansiypzleyjd Machine control via a touch panel, displaying: Temperature, pressing force, shelf opening time, loading area calculator, glue process programming Power: 21KW CE certificate Manufactured in 2023 Machine available on order Machine is new

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Fsdewx Rrnepfx Anysgd Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: excellent (used), Shelf length 2500 mm Fedpfx Ansyw H H Soyogd Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Water heating

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 9 PLATENS - Platens dim. mm. 800x800 - Opening mm. 1600/1800 Fgjdpfxjwryw Tj Anyod - Cylinder diam. 350 mm.

Condition: used, Year of construction: 2000, machine/vehicle number: 11/03, SECOND-HAND MULTIPLATENS PRESS VECCHIATO MOD. 600-600 4P – CE RULES - N. 4 platens - Platens dimensions mm. 600x600 - S/N 11/03 - Year 2000 Fgodpewrym Iofx Anyjd

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI - Platen dimensions 3000x1300 mm Fjdpfxjx Rqtis Anyegd - N. 6 cylinders - Boiler with hot water - wooden waste

Condition: used, machine/vehicle number: 17, functionality: fully functional, working width: 2,000 mm, opening width: 900 mm, SECOND-HAND PRESS PELLEGRINI Fedpfxex Rrgqe Anyegd - Platens dim. mm. 2000X800 - Opening mm. 900 - S/N 17

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 7 platens - Platen dim. mm. 800x800 - Opening mm. 1600/1800 - Cylinder diam. 350 mm. Fgjdewry H Uopfx Anysd

Condition: used, Year of construction: 2005, SECOND-HAND BENDING PRESS VECCHIATO MM. 2600X1300 - CE RULES - Opening mm. 1500 - N. 4 cylinders Fgsdewrzbaspfx Anyed - Top bottom movement - Year 2005 - Safety nets - Manual and CE certificate