Condition: good (used), Functionality: fully functional, load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with a 6-ton load capacity with hand and dual-foot remote controls In perfect condition, with no defects, extremely robust, indestructible, and simple technology for easy maintenance. Speed continuously adjustable from 0.02 to 1.0 rpm Doliswam Ihjktzlecg Tilt angle 135° and speed display with dual-foot remote control and additional hand-held remote control Diameter of the clamping plate: 1650 mm Height tilted to the center of the plate: 1450 mm Height horizontal: 1650 mm Length: 2200 mm Width: 1200 mm The machine can be lowered by 200 mm upon request (by removing the lower rail).

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Dcoljv Taq Rsiktzlsg Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 2000 mm Dcolsdzqrboiktzlsg Width 1600 mm Thickness 110 mm Working height 600 mm Plate thickness 30 mm continuous Weight approx. 1000 kg Good condition, good surface

Condition: used, Year of construction: 2010, Functionality: fully functional, Offered for sale is a used Jantar 2 CNC-controlled flame cutting machine from Eckert Cutting Technology. The machine is located at our customer's premises and is fully functional. A viewing is possible upon request and by appointment. The Jantar is designed for precise contour cutting up to 100mm. The machine, with its double-sided drive, achieves high cut quality, even for small holes. Cutting width: 2,500mm Cutting length: 4,000mm Working width: 2,000mm Track width: 3,320mm Total width: 4,240mm Feed rate: 0 - 18,000mm/min The system is controlled via the Windows-based ECK 872 program. Thanks to its clear menu navigation, the system is ready to cut in just a few steps. The control system is installed as a ride-on version. The ECK 872 CNC control is equipped with the following features: + 15" TFT touch color display + Built-in heat exchanger + Sheet position correction + Cutting parameter selection + Program start point setting Deliktzewc Al Uslocg + Cutting program selection + Macro functions + Block approach + Move Back function (after interruptions, the torch can be repositioned to the exact point using the "Move Back" button) + Manual cutting + Malfunction diagnostics The CNC control is equipped with the FINEST CUT Light 6.38 software (Windows 2000/XP/Vista). It allows for designing with CAD and CAM parts, working with a flag catalog/generator, automatically creating flags based on thickness/material, and DXF-IN. The system/control is also equipped with the HD 3000 plasma torch support with arc height control. This feature is characterized by the absolutely precise guidance of the torch over the material to be cut. (Vibration tolerance of less than 20 µm on the torch shaft). The most important advantage arises from the use of the interactive CUTBUS bus system. This system transfers all piercing, cutting, and travel parameters from the technology data stored on the control system. The system also includes the ESR-600 system. The ESR-600 system is equipped with a special rotating head that allows the cutting of pipes with a diameter between 100 mm and 315 mm. The chuck is designed for pipes with a diameter of 120-204 mm and features a moving suction pipe with a collecting container inserted into the pipe. The system also includes the PFC-4 self-cleaning cartridge filter system. The advantages of this self-cleaning filter system are its optimal cleaning performance, user-friendliness, and low maintenance requirements. The filter system is equipped with a BIA M category cartridge filter (separation efficiency > 99%). The flame cutting table features an under-table extraction system and an internal extraction duct. The support consists of 100 x 5m steel panels, which are installed at an angle. The table is divided into sections, each 500mm wide. This division ensures optimal capture of contaminants while requiring a relatively low air volume. Cutting area (W x L): 2,000 x 4,500mm Table height: 740mm Required compressed air: 4 bar (dry, oil-free) The system must be dismantled on-site, and transport must be organized independently. If you have any further questions, please do not hesitate to contact us. The system is being sold on behalf of the customer.

Condition: used, Cast iron bed Dolijv In Iysktzlecg Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Condition: used, Year of construction: 1998, Mobile, stationary welding fume extraction. Dust extraction, self-cleaning filter, negative pressure NEDERMAN FILTERBOX 663 Device with electromotive filter cleaning. Djlswdhb Reiktzljcg Fan with a power of 1.5 kW placed on the clean side. Three-phase motor Extraction arm 3 m long. Stock no.: 0980

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Dcsliktjwak U Eozleg Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Condition: like new (used), Year of construction: 2023, I will sell a 2kW laser cutter. MAX Photonics light source, Raytools head, Hali cooler, Cypcut control. The machine is almost new, used about 2 hours to do tests. The machine has CE and instructions. Possibility to do tests. Djlowd T Ebsiktzlecg

Condition: good (used), Tehac welding manipulator table Djlieldg S Ijktzlscg Diameter bed: 480 mm Height max: 113 cm

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 217107, Mobile extraction system with filter Doliewa I Hljktzlocg

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° Possibility of selling the machine as is or reconditioned (with variable speed) Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T Delov Hxuneiktzlecg

Condition: used, Year of construction: 2011, operating hours: 835 h, filter area: 80 m², suction capacity: 7,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter for continuous operation. For plasma, laser, sandblasting, soda blasting and all types of dry dust. Brand: DEBUS / PIONIER Model: DES DZF-1 The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The device is in very good technical condition - only 835 hours worked year of production: 2011 Fan with a power of 5.5 kW. + noise silencer Efficiency up to 7000m3/h Filtration area - 80 m2 Connector diameter 300 mm Filter cartridges - 4 pcs. Electrical documentation available Unit dimensions: height - 3.40m total width: 1.40m x 1.40m Dcjlewdg Txeiktzlog stock no.: 0977

Condition: new, Year of construction: 2025, Functionality: fully functional, load capacity: 900 kg, Equipment: foot remote control, Protec KT 900 kg load capacity Horizontal capacity: 900 kg Tilt capacity: 900 kg Dslikjwak Swetzlocg Clamping disc diameter: 650 mm Bore diameter: 110 mm Tilt angle: 90° Speed: 0.05 to 0.5 rpm (Speed: 0.05 to 1.1 rpm for an additional charge of €350) Infinitely adjustable tilt With handheld remote control, digital speed display, and foot-operated remote control

Condition: used, Year of construction: 2010, Functionality: unexamined, machine/vehicle number: SN:10090150, IPG and Trump laser systems are for sale. Dcsliksv Evxbjtzljg 1x IPG YLS-3000 laser welding system, used, year of manufacture 2010 / in use until approximately 2019, €7,880 net. 3x Trump laser TruDisk 4001 22 kW, year of manufacture 2013-2016 / in use until 2019-2022, €5,500 net each. 3x Trump laser TruDisk 4006 22 kW, year of manufacture 2013-2016 / in use until 2019-2022, €5,500 net each. In use until recently, was dismantled due to a production/product change. No maintenance records or similar. Can be tested on-site (where possible). (Graz - Austria) No guarantee/warranty or similar. Shipping and pickup available.

Condition: ready for operation (used), Peddinghaus extraction system installation cutting machine Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Peddinghaus-Absaugsystem-Installationsschneidemaschine Baujahr: 2009 Operates with 400 V In funktionsfähigem Zustand aus der Maschineninstallation entfernt Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Dceliksvilz Tetzleg Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Peddinghaus extraction system installation cutting machine Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The displayed price is exclusive of VAT

Condition: good (used), Peco welding machine spot welding machine Peco welding machine welding flat strip and electric cable Peco LA 40 air control Bosch E35...DYF welding controller More welding machines in other sizes - new and used - you will find in our store! Djliktjivappjzlocg International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Doliktzep Am T Ueljcg Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.

Condition: used, Year of construction: 2007, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Plymovent / Euromate Model: SCS Year of production - 2007 Cartridge filter inserts - 2 pcs Filtration surface 150 m2 Delikswdgq Rotzlecg Fan in a sound-absorbing enclosure with a noise silencer with a power of 7.5 kW. Fan model: CHB16LG03 Built-in frequency converter Efficiency up to 9000 m3/h Inlet diameter - 400 mm Filtration efficiency - 99.8 % Contamination container - 100 liters Includes noise silencer and electrical documentation. Stock no.: 0842

Condition: good (used), load capacity: 2,000 kg, Welding turntable with a 2-ton load capacity with hand and foot remote control Infinitely adjustable speed and inclination Good condition, robust and indestructible machine Dcoliewak Ewjktzlsg Tilt height to center: 1.05 meters Horizontal height: 1.3 meters Diameter: 1.3 meters Length: 2.2 meters Width: 1.4 meters Speed: 0.01 rpm to approximately 1.0 rpm

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 Djlikjv Uwyretzlecg with 100-program MPS 8043/1 welding controller

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, -Cobot WeldSpace basic cell with two large work areas, automatically moving protective enclosure with two roller doors, collaborative welding robot UR10e -Demmeler WeldSpace programming and operating concept (DWSP) Deliswcdm Hsktzlscg -3D welding table D28 PROFI Premium LINE, tabletop with D28 system bore in 50 mm x 50 mm grid, hardened version DEMONT 706 M -Cobot WeldSpace 4.0 2-axis manipulator -Cobot WeldSpace 4.0 clamping plate D28, hardened DEMONT 760M -Fronius TPS400i 400 A CMT welding system, water-cooled, software expansion and integration into DEMMELER WeldSpace programming and operating concept (DWSP) -Fronius RC Panel Pro, wired -Cobot WeldSpace control panel terminal -Cobot WeldSpace Burner cleaning station R1

Condition: new, Year of construction: 2024, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. Dslsu Nf Nzjiktzlecg when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe, we have in Europe in 3 locations a sales and service organisation.

Condition: used, Year of construction: 1998, suction capacity: 1,000 m³/h, negative pressure: 2,700 Pa, Welding fume extraction, dust extraction, self-cleaning, pneumatic, negative pressure filter KEMPER. For welding, grinding, sandblasting and all types of dry dust. Cartridge filter inserts. The filter is cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 1.5 Kw Capacity 1000 m3/h Dcolikjwdfzuotzljg Negative pressure 2700 Pa Cartridge filter inserts 2 pcs. Stock no.: 0978

Condition: used, Year of construction: 2003, suction capacity: 3,600 m³/h, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. Dslikterwm Izezljcg 4 Kw fan. Capacity - 3600m3/h year of production : 2003

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dceliktjvrgbtozlsg Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944