Used wide belt sanders 1100-1199mm working width for sale (105)

Condition: used, Year of construction: 2001, Abrasive belt length, 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt design 1st unit: Cross belt sanding shoe 1st unit: Electronic segmented shoe Abrasive belt width, 1st unit: 150 x 4800 mm Drive, 1st unit: kW 2nd unit: Longitudinal roller design 2nd unit: Steel calibrating roller Abrasive belt length, 2nd unit: 2150 mm Abrasive belt width, 2nd unit: 1350 mm Abrasive belt speed, 2nd unit: 18 m/sec 3rd unit: Shoe unit design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding shoe, 3rd unit: Electronic individual segments, 32 mm width Abrasive belt length, 3rd unit: 2150 mm Abrasive belt width, 3rd unit: 1350 mm Nedpoxzi S Njfx Adtscr Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed, fixed: stepless 5-15 m/min Control: Touchscreen control Electr./pneum. belt oscillation: electric Infeed height: variable (lower table runs) Table stroke: electro-motor Digital table display Working height or feed table height: 880 mm Location: Nattheim

Condition: excellent (used), Year of construction: 1992, Wide belt sander Manufacturer: Bütfering Model: AWS 1100 Year of manufacture: 1992 Sanding width: 1,100 mm Max. workpiece thickness: 150 mm Nedpsywi Rmofx Adtecr Abrasive belt dimensions: 1,900 x 1,100 mm Power: 15 kW Feed speed: 2.5–12.5 m/min, variable

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Storage location: Nattheim Nodpovvki Nofx Adtscr

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Njdpovvkipofx Adtocr

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Ncedpfxjvvkkae Adter Storage location: Nattheim

Condition: used, Bütfering Classic 111 C Wide belt calibration and fine sanding machine Constant working height / head adjustment Operator terminal with 50 program memory slots and plain text display Combined steel contact roller and sanding shoe unit CPS electronically controlled segmented sanding shoe unit Ncedpfx Adjy A Hpdoter SPS-controlled sanding pressure adjustment Working width 1100 mm Main motor 15 kW Feed speed 4 and 8 m/min Additional compact roller table at infeed and outfeed Machine is WORKSHOP OVERHAULED and in TOP CONDITION from a small business Available ex stock Lieboch

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 150 mm, type of input current: three-phase, – Made in Germany – Shoes with pneumatic jump (pressure shoe) TECHNICAL PARAMETERS: Njdpfjyyv Auox Adtecr – Sanding width: 1100 mm – Max. sanding height: 150 mm – Min. workpiece length: 600 mm – Motor power: 2 x 15 kW – Both units with pressure shoes – Pneumatic pressure shoes – Adjustable shoe pressure – Rubber rollers: 70 Shore – Pneumatic oscillation – Cleaning brush – Feed tables with support rollers – Continuously adjustable feed speed – Feed speed range: 4–13 m/min – Extraction port diameter: 3 x 200 mm – Machine dimensions (L/W/H): 250 x 200 x 210 cm – Weight: ~2500 kg

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Working width: 1100 mm Abrasive belt width: 1120 mm Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Njdpfx Adsy E Rt Eotscr Operating manual Year of manufacture: 2003 New conveyor belt Price

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring steel contact roller and electronic CPS segmented pressure beam with 25 mm divisions - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt air-blast device - Vacuum conveyor belt with blower Control: - Terminal with 50 program memory slots - Simple menu guidance with plain text display - Visual indication of active elements during operation - Fully automatic PLC-controlled start sequence for all drives - Digital recording of operating hours Includes cleaning brush Roller table at infeed Roller table at outfeed Ncedpfx Ajwka Snodtsr Extraction capacity: 1850 m³/h Extraction connectors: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air requirement: 10 l/min Weight: 2,200 kg Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller Ncjdpewka S Uofx Adter 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Nodpsxx Uxisfx Adtjcr

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Njdpfx Aeyulfmedtocr Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Condition: used, Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine sanding machine Combination unit: contact roller and pneumatic sanding pad unit Enormatic Digital thickness display for workpiece height Belt drive motor power approx. 9 kW Contact roller level continuously adjustable via grit scale Infeed and outfeed table with roller support Working width 1100 mm Ncjdpfjyyltcox Adtor Feed speed 2.5 - 15 m/min Machine will be PROFESSIONALLY REFURBISHED Available from stock Lieboch

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Njdoyy Nnkspfx Adtscr Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: excellent (used), WIDE BELT SANDER Butfering 110cm Model – super 111L Sanding width: 1,100 mm 1 combination unit with steel roller The pad has quick raise/lower capability 11kW motor, star/delta starter Two feed speeds Electric table adjustment Electronic table position display Oscillation with photocells Sander in very good condition, ready for operation Njdpfxeyymlys Adtjcr Machine dimensions: width 180cm, length 185cm, height 200cm Weight approx. 1,500kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW 2nd Sanding Unit Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table Nedpsyt Nvyofx Adtecr MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Total weight: 4,100 kg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Abrasive belt oscillation contactless (photo-electric) - 1st unit (calibrating) Nodpfx Aoyrtriodtjcr Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: excellent (used), Wide Belt Sander SCM sandya 7 Sanding width: 1100 mm 1st unit with metal calibration roller, 15 kW 2nd combination unit with rubber roller and pad, 15 kW Minimum electrical protection: 32A Pad with quick lift and drop function Nodpfxoyx Dvys Adtscr Pneumatic oscillation Variable feed speed Electric table height adjustment Table position display Pneumatic feed belt centering Robust sander, excellent sanding quality

Condition: used, OTT MEGAtronic 111 Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Feed speed: 5 + 10 m/min Nedpfoyw Rknox Adtocr Sanding unit motor power: approx. 11 kW Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: used, Year of construction: 1999, functionality: fully functional, total width: 1,600 mm, total height: 2,000 mm, total length: 2,000 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,187 kg, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, extraction nozzle diameter: 160 mm, input frequency: 50 Hz, input voltage: 400 V, - Italian made - DTR (technical documentation) and CE certified TECHNICAL SPECIFICATIONS: - Maximum working width: 1100 mm - Maximum working height: 170 mm - Minimum working height: 3 mm - Minimum working length: 370 mm - Dimensions of sanding belts (width x length): 1115 x 1900 mm - Feed motor power: 0.8 kW - Two feed speeds: 4.5 and 9 m/min - Sanding height adjustment motor power: 0.25 kW - 2 units (aggregates): 1) Grooved steel calibrating roller, Ø 140 mm Ncodpsytp Agefx Adtsr - Rubber pressure roller 2) Grooved rubber roller + shoe + steel roller - Rubber pressure roller - Aggregate I and II motor power: 15 kW From below: - 3 pressure rollers - Conveyor belt - 3 pressure rollers - Pneumatic belt oscillation - Air blower for the second sanding belt - Electric and manual table lifting (for precise setting) - With pneumatic brake - Sanding belt speed: 16 m/s - Operating pressure: 6 - 8 bar - Extraction port diameter: 2x160 mm, 2x110 mm Machine dimensions: - Overall dimensions (LxWxH): 2000x1600x2000 mm - Weight: 1200 kg

Condition: used, OTT Comet-2 1100 Wide belt sander Sanding width 1100 mm Machine is untested Service is recommended No warranty / No guarantee Ex stock Lieboch NET price € 1,900.00 Nedpfx Asywiyzsdtocr

Condition: used, Year of construction: 1979, Belt width: 150 mm Belt length: mm Ncodpfxswm Nrpj Adtsr Table size: approx. 2600 mm x 1000 mm Extraction connection: Motor power: 3 kW Machine length: Machine width: Weight: 900 kg

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. Ncedpfxstwzyfj Adtjr - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Calibrator 1100, iron rollers and pad, used, tested. Worn conveyor belt. Nsdpfxen A H Uxo Adtscr

Condition: used, SCM Sandya LS1 R110 calibrating machine with 1100 mm roller and brush. Approximate power consumption: 13 kW. Used. Nsdpeuk Hi Rofx Adtocr 11 kw roller 2.2 kW brush Carpet 0.75 kw