Used wide belt sanders 1300-1499mm working width for sale (125)

Year of construction: 2001, condition: good (used), I sell the widebelt sanding machine Costa SA2 TS 1350, year 2001. Configuration electronic segmented pad - brushing unit. Working width 1350mm Bands 1380x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2600kg Codpfxjg Trufe Afleaa 1 motor 11 kW End brushing unit with dust extraction. Including documentation. Condition good. Available immediately.

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Underside sanding Material guidance via rubber rollers Contactless oscillation control Quick-change pressure beam Electromotive adjustment of tool thickness with clearly legible digital display Pushbutton with contactor control Sanding width: 1350 mm Max. workpiece thickness: 150 mm Abrasive belt width: 1360 mm Abrasive belt length: 1900 mm Roller feed switchable 10 + 20 m/min Compressed air connection: 6 bar Air consumption approx. 180 NL/min Availability: short-term Cedpfx Ajwpm I Tofleaa Storage location: Röllbach

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,511 h, functionality: fully functional, machine/vehicle number: 67 881, grinding width: 1,350 mm, grinding height: 150 mm, grinding belt length: 1,600 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Grinding height: max. 150 mm Grinding width: max. 1,350 mm Grinding belt length: 1,900 mm Number of units: 3 sanding units (1 cross belt, 2 sanding pads) Segment sanding pad: electronic Width: 25 mm Combination unit power: 16.5 / 21 kW Cross belt power: 15 kW Shoe unit power: 15 kW MACHINE DETAILS Power: 21 kW (28.55 HP) Total connected load: 59 kW Total weight: 4,550 kg Total length: 2,740 mm Total width: 2,000 mm Total height: 2,125 mm EQUIPMENT - 3 sanding units: 1 cross belt, 2 sanding pads - Cleaning brush - Vacuum table - Blow-off device for sanding belt - Belt change side on the left - Insert control Csdpfx Aowlqvmofljaa - Bütfering articulated pressure bar

Condition: good (used), Year of construction: 1996, Combination machine Roller - electronic segmented shoe (CPS system) Codpfx Ajwumtyjfljaa Through-feed 1350 mm 3 different motor power ratings selectable 3 different sanding speeds Variable belt speed Belt blow-off device Cleaning brush

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Cedpfx Aoxcg Scofleaa

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. Casdpfx Ajxp Hvnoflja The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: excellent (used), Year of construction: 1988, utomatic wide belt sander with 2 belts for varnish, wood, veneer, composite materials and various materials Technical data: Working width mm 1350 Max useful height mm 130 Belt size mm 2450 x 1350 Composition: 1° Group: Sanding roller diameter mm 320 - sh. 60 - Blowers cleaning belts - Motor Kw 11 with speed variator Caedpfxegmbu Is Afloa 2° Group: Sanding roller diameter mm 320 - sh. 40 - Blowers cleaning belts - Motor Kw 11 with speed variator Scotch brite - Motor Kw 1,5 Vacuum table - Motor Kw 5,5 Feed belt speed variator 4/19 mt/min Operating pressure 7 Bar equipped with Abrasive belts series Overall dimensions: machine mm 2000 x 2700 x 2500 vacuum pump mm 800 x 700 x 900 h

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Casdpfx Aekwhxisflja Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2006, Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA Cedjv Ecy Sspfx Aflsaa - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. Dqlu3Z - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - 1 pc. of UNI-BLOWER on outfeet side - 2 pc. of LIROS/SEOT 09 anti static units on outfeed side ( top/bottum )

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The HSM is the precision surface sanding machine tailored to the needs of small and medium-sized craft and industrial businesses. Whether for effect sanding, cross sanding, lacquer or high-gloss sanding, for panels, solid wood, or veneered workpieces – the Heesemann HSM is the perfect sanding machine for the trade! The surface sanding machine is particularly attractive for joiners and interior fitters. The HSM is available in predefined standard configurations, equipped with two, three, or four units, and can be fitted with a cross belt for cross sanding applications. Caedpfxjw Db Dre Afloa Units and features can be selected individually. We are happy to provide you with a customized offer.

Condition: good (used), Year of construction: 2000, • Sanding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total sanding units: 2 Casdpfx Afowwlm Djlja • Longitudinal belt: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 12 m/min • Sanding belt length, longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: inspected, in stock

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Csdpju Hlzfofx Afloaa Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Caodpfxew A Ng Es Aflsa Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: •Robust, space-saving dual-belt grinder for demanding pre- and finish-grinding •Constant working height thanks to upper section adjustment •Working width 1350 mm •Top-loading grinding, with 2 grinding units •1. Unit with grooved rubber contact roller of proven hardness •Pneumatic (programmable) adjustable contact roller, contact roller level continuously adjustable according to an abrasive grit scale •Second unit with electronically controlled, segmented sanding pad, segment width 35 mm, and quickly replaceable sliding lining •Parallel spring-loaded, ground steel pressure roller at the inlet •Rubber-coated pressure rollers between the sanding units and at the outlet •Motor 15 kW (20 HP), 400 V/50 Hz with soft start for low power consumption during start-up •Motor-driven, finely adjustable height adjustment with numeric display •Belt tension, control, and oscillation are pneumatic, compressed air consumption approx. 4 l/min. Optimum safety thanks to automatic immediate stop with disc brake in the event of a belt break. •Workpiece feed 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt. •Complete electrical system with contactor control; automatic star-delta start of the main motor, motor protection, and ammeter for monitoring chip removal. •Passage height 200 mm •Sanding belt size 1350 x 2000 mm Casdpfxeuhiq Ds Aflja Comfort features: •Automatic thickness adjustment across the entire working width. •Workpiece over-thickness protection with immediate feed stop and automatic lifting of the machine head. •Stepless chip removal adjustment. •Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min. PLC control/programming with color touchscreen and TEACH-IN storage (at the touch of a button based on the grinding result, i.e., no typing required) Pneumatic carpet control Workpiece support with roller at the infeed and outfeed Enormatic: Fully automated quick adjustment and feed solution eco* energy-saving mode Fault diagnostics Job and operating hour counter Machine in E-Plus version (RE) Including 1350 cm outfeed table extension, foldable, without insert plate Including freight, unloading on site Including commissioning and training Location: Hochheim Availability: Approx. week 51/2023

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) Caodpjvdtxijfx Aflea 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The HSM Compact is the universal wide belt sander for workshops. It is perfect for calibrating, intermediate sanding of veneers and lacquer, structuring, and cleaning of panels, solid wood, or veneered workpieces. Thanks to its compact dimensions, it is ideally suited for a wide range of requirements. With the HSM Compact, you get a multifunctional sanding center occupying just 4.5 sqm, making it ideal for producing a variety of surface finishes. It is Heesemann’s smallest machine and comes standard with the patented CSD magnetic pressure beam, allowing you to move from manual sanding to automation. HSM .2 Compact ROLLER/LONGITUDINAL SANDING UNIT - Year of manufacture: 2025 - Working width: 1,350 mm - Vacuum clamping system with vacuum extraction table and demand-driven suction - Constant working height (880 mm) - Workpiece thicknesses: 3–200 mm - Automatic workpiece thickness measurement at infeed - Non-driven rollers at machine infeed and outfeed - Electromagnetic pressure beam (CSD) - 15.6″ touch display - LED lighting on abrasive belt support side Caodpfow Dbx Nsx Aflja - Outfeed folding table with wooden surface - Structuring brush unit (Ø 200 mm) incl. 5.5 kW drive via frequency inverter and quick-change system, Anderlon fill material - Cleaning brush unit, horsehair (Ø 120 mm)

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 Codpfx Afjtt Slcjloaa - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2007.10.191, with Heesemann dust extraction machine, type: EA 8 Grinding width: 1350 mm Workpiece height: 3 – 150 mm Cajdov Enzujpfx Afloa Units: 3 x cross grinding units, each 15 kW; 1 x longitudinal grinding unit with pressure lamella belt 15 kW; 1 x brush roller unit 0.75 kW; Total power connection: approx. 80 kW Total air requirement: 193.5 m³/min

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head Csdjv Hxrgspfx Afloaa - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual indicator when the machine starts up - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.

Condition: like new (used), Working width 1350 mm The machine is in excellent, new condition as shown in the pictures. Caedpfx Aeuuitgeflsa

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: S4 1TT33 3250, total width: 4,340 mm, total height: 2,775 mm, total length: 5,145 mm, working width: 1,350 mm, workpiece height (max.): 16 mm, Viet S4 sanding and calibrating machine. * 1st Longitudinal sanding unit T60 E IPP HP DU; Belts 1380x3250, Motorization by converter 15 KW * 2nd Transversal sanding unit T60 ET HP DUO , Belts 150x8700, Motorization by Converter 15KW Cajdpfx Afeutdrholea * 3rd Transversal T60 AND HP DUO sanding unit, 150x8700 belts, powered by 15KW converter Variable speed belt 2-20 m/min suction unit.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The JSM is an affordable all-round machine for small and medium-sized craft enterprises with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Feed unit with profiled conveyor belt - Feed speeds: 3 - 12 m/min - Variable working height via motorized height adjustment (maximum table height 880 mm) - Workpiece thicknesses: 3 - 160 mm - Pressure roller (Ø 50 mm) - Table extensions with non-driven rollers at infeed and outfeed (300 mm each) - 15.6" touch display (integrated) - CSD pressure beam system (magnetic pressure beam) - Remote maintenance program - Sanding belt length: 2,150 mm, sanding belt width: 1,120/1,370 mm - EMS Energy Management System for energy-efficient machine operation Caedpfowz Ignjx Afloa - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on the belt support side) - Terminal and belt support side on the left - Electrical version: 400 V, 50 Hz Advanced package additional features: - Vacuum table with pre-drilled holes for connecting the vacuum blower - Vacuum blower integrated within the machine - Workpiece cleaning with oscillating air nozzle - CSD pressure beam system (magnetic pressure beam) instead of the ACP system - Oscillating sanding belt discharge - Belt Manager software

Condition: excellent (used), Year of construction: 2004, Calibration / sanding line top bottom COMPACT - SATURN 135 R.R.K Inf and SATURN 135 RRK Sup RRK Inf: Motorized up/down adjustment with electronic thickness display - Fixed worktable height 950mm-Automatic belt centering - Working width 1350mm - Thickness 3-165mm - Strips 2620x1365mm 1- Steel roller D=250mm - 30kw motor 2- Roller 90sh D=250mm - Motor 18.5kw 3- Roller 44sh D=220mm with skid - Motor 15kw Settings and position displays on each group - Selector for activation or deactivation of each group roller - belt feed motor with inverter 5.5hp - belt feed speed 3 to 18m/min - blower oscillation timed cleaning - vacuum device with 10hp fan - CE standards RRK Sup: motorized up/down glide with electronic thickness display - Fixed worktable height 950mm- Automatic belt centering - Working width 1350mm - thickness 3-165mm - belts 2620x1365mm 1- Steel roller D=250mm - 30kw motor 2- Roller 90sh D=250mm - Motor 18.5kw 3- Roller 44sh D=220mm with skid - Motor 15kw Settings and position displays on each group - Selector for activation or deactivation of each group roller - belt feed motor with inverter 5.5hp - belt feed speed 3 to 18m/min - blower oscillation vacuum device with 7.5 hp fan - elevating platform for in-line operation machine in working line: height 950mm - CE standards Cajdpsugr Iiefx Afloa spare parts stock with additional roller

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, grinding width: 1,350 mm, SCM wide-belt calibrating and fine sanding machine Model dmc sd 60 RCS 135 Technical data: Working width 1,350 mm min./max. working height 4-170 Sanding belt width 1,370 mm Sanding belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (hp) Feed speed 4.5/9 4.5/9 m/min. Standard equipment: - R140/85 rubber-coated calibrating roller diameter 140 mm 85 SH - 1st pos. - R160/45 rubber-coated sanding drum diameter 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Motor power 1 unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers Caodpfx Afjtwqn Soloa - anti-kickback device in the infeed before the first unit - Rubber feed carpet 60 SH - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering incl. the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation and deactivation of the roller 1. unit "R" + pneumatic activation and deactivation of the roller 2. unit "CS" + "MESAR" elastic link sanding shoe + pneumatic activation and deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50 + electronic adjustment of the working height 1 pc. CE safety regulations 1 pc. roller table in infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 "RA" inclined ribbed steel contact roller 1st unit 1 pc. Main motor 18.5 kW (PS 25)

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 1,300 mm, 1 bottom calibrating sander equipped with 3 bottom belts 30, 22, 18.5 kW Casdpfx Aew A A Enoflea 1 top calibrating sander equipped with 3 top belts