Condition: used, Year of construction: 2006, total width: 4,210 mm, total height: 1,830 mm, Dimensions (LxBxH): 190 x 421 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107707 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Motor power [kW]: 5.5 - └ Spindle 2: - - Motor power [kW]: 7.5 - └ Spindle 3: - - Motor power [kW]: 7.5 - └ Spindle 4: - - Motor power [kW]: 7.5 - └ Spindle 5: - - Motor power [kW]: 7.5 Cgedjwng Rfopfx Aa Njp - Feed table length [mm]: 1800 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Voltage [V]: 400 - Current consumption [A]: 78 - Fuse [A]: 80 - Power [kW]: 36.0 - Transport dimensions: 1900mm x 4210mm x 1830mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform Cedpfx Asd Ih Huja Negp manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warra...

Condition: used, total width: 1,500 mm, total height: 1,500 mm, Empty weight: 2.000 kg Dimensions (LxBxH): 380 x 150 x 150 cm Four-sided planer Wadkin GDP220 220 x 120mm capacity 2000mm long feed table 4 Spindles Tersa planing blocks Infeed roller Under x 5.5kw Right/Left x 5.5kw Above x 5.5kw Variable feed rates 5 - 30m/min Pneumatic Pressure on Feed Rollers 40mm dia spindles Mechanical digital readouts for spindle setting Manual waxalite pump Motorized setting for left spindle in/out with mechanical digital readout - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 5.5 Cgjdpswng Tgofx Aa Nsp - - Spindle diameter [mm]: 40 - - Tool present: Yes - Max. planing width [mm]: 220 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Tool type: Tersa - Transport dimensions: 3800mm x 1500mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total width: 5,440 mm, Dimensions (LxW): 170 x 544 cm Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 92789 - Voltage [V]: 380 - Current consumption [A]: 85 - Fuse [A]: 100 Cgodpfswnizmsx Aa Nop - Power [kW]: 38.0 - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Csdpfsw N Nixsx Aa Njgp Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence Codpoymm Nqefx Aa Njgp - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 5503 TECHNICAL DATA - 2.2kW motor - Power supply: 380V - Dimensions (LxWxH): 1870x1050x1220mm - Weight: 846kg Codpfeymd T Tex Aa Negp Machine equipped with: - 2 work tables with angle stops, size 380x330mm - Pneumatic clamps - Tables adjustable in two planes - Capability to mill both longitudinal and round tenons on the tables - Tables adjustable up/down - Adjustable tenon width - Central lubrication - Unpainted - Italian-made - Two work stations - Pneumatic operation - Robust machine Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Year of construction: 1986, condition: excellent (used), I sell Profile Grinding Machine Reckmann LM 161. Grinder in very good condition, little used. Cgjdjuyg Rnjpfx Aa Nop

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Features and technical data: - Working width: 220 mm - Working height: 120 mm - Feed motor power: 3 kW - Lower spindle motor power: 5.5 kW - Left/right spindle motor power: 7.5 kW Cgsdpjykvw Ejfx Aa Nep - Upper spindle motor power: 7.5 kW - 5th (bottom) spindle motor power: 7.5 kW - Spindle speed: 6,000 rpm - Spindle diameter: 40 mm - Minimum tool diameter: 125 mm - Maximum tool diameter on lower spindle: 125 mm - Maximum tool diameter on right spindle: 190 mm - Maximum tool diameter on left spindle: 180 mm - Maximum tool diameter on upper spindle: 200 mm - Maximum tool diameter on 5th spindle: 180 mm - Feed rate: steplessly adjustable 5–22 m/min - Feed roller diameter: 140 mm - Adjustment range of jointer table and fence: 10 mm - Length of jointer table: 2,000 mm - Feed return - Push button switch for feed 'forward' - Insert cutter for guide groove - Powered roller in outfeed table - Manual lubricant pump Availability: short notice Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input length: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Filling width per cycle: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: Max. usable press width depends on individual lamella widths • In multi-lane operation, filling widths may vary by max. 15 mm • Minimum contact surface per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Press bed and construction: Csdpfsx D I Nrjx Aa Negp • Press bed area: approx. 2500 x 1300 mm • Stable base frame with lower press table in stainless steel (ground electrode) • Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width • Integrated hydraulic unit for press force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection value of press (without options): 7 kW • Electrical connection value for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and control panel • Protective cover Additional equipment • Collection table extended to 3700 x 1300 mm (with stainless steel wood support) • Motor-driven multifunctional pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and rinsing device for glue head • Modem with software for online connection

Condition: good (used), Year of construction: 1980, well-preserved slotting machine from the reputable manufacturer Okoma, with 40 mm spindle Codpsxvllzsfx Aa Njgp

Condition: ready for operation (used), Year of construction: 2024, total height: 2,500 mm, overall weight: 3,700 kg, This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information. • Pneumatics and hydraulics: • Operating pressure: 6–8 bar • Drive system: Servo-hydraulic drive • Electrical data: • Electrical connection: 3 × 400 V / 50 Hz Cjdeyglkmjpfx Aa Negp • Number of phases: 3L • Maximum power: 30 kW • Maximum current: 100 A • Applications: • Laminating, punching, and edge folding of panels • Trimming and edge foiling of panels • Processing of armrests and central armrests • Production of railings, handles, back covers, and door handles • Typical use: Ideal for panel processing interior components; also suitable for the furniture industry Dimensions Machine Depth 2500 mm

Condition: good (used), Year of construction: 2010, Weinig Conturex C126 CNC Window production machine Description; Year of construction: 2010 Working width 40-260mm Working heigth 25-150mm Powergrip clamping table Table loading length single table 4 x 2280mm Workpiece length single table cycle 220-2700mm Table loading length double table (combined) 2 x 4630mm Workpiece length double table cycle without follow up 220-5000mm Workpiece length double table cycle with follow up 5000-6000mm Fully new PC & Software 2025 Full description on request Available approx. summer 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Cgodpfx Aaox Tq I Es Nsp Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 1997, dimensions ca. 4 x 2 x 2,5 m weight ca. 3.000 kg control Sütron BT20 WEINIG UNITEC 10 automatic tapping and slotting machine from a UC-Matic window system, not functional. Sütron BT20 control system, Cjdpsw I Db Hjfx Aa Nogp Details available on request.

Condition: used, Cutting height max. 100 mm cutting width max. 100 mm impulse time ca. 4 Sekunden Himmel HF120 miter jointing machine for precise and secure gluing of miter joints in wooden frames, glazing bars, and moldings with white glue. The machine enables fast setting times thanks to high-frequency technology, pneumatic pressing mechanisms, and precise alignment of the workpieces. Ideal for furniture and picture frame construction. The glue must be applied manually, as the machine does not have a glue reservoir. Operation: Foot switch Cjdpev Hp Hbjfx Aa Negp Possible angles: 90°, 120°, 135°

Condition: used, device 10 spindle diameter 40 und 50 mm engine 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) mitre saw for the production of windows, elements, and doors. Frame-by-frame, series production, or individual parts production with 2 tenon and slot spindles, including Oertli tool set - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80) mm 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW Cgedpfx Aov Ag Tdsa Nop 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW - Double part package - Re-milling package with re-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw - Rung support strip - Includes extraction pipe system - Includes Oertli tool set - Further technical data and tool drawings available on request.

Condition: used, Used control cabinet from a Weinig Unicontrol 6, suitable as a source of spare parts or for building a new control cabinet. Cgodpjt Na Drefx Aa Nsp Contents include, among others: - Brake unit Hilger & Kern - Transformer Rathgeber type ET 1000.

Condition: used, suitable for UNITEC 10 or similar, year of manufacture: 1998 Cgedpfx Aelkckmsa Nep CNC motorised control, Quantity: 2 Price per unit: €2,000.00 + VAT

Condition: used, Spindle diameter 50 mm Cgedpolf H S Asfx Aa Nsp Spindle length 320 mm Motors 2 x 11 kW + 2 x 3 kW

Condition: used, Spindle diameter 50 mm Spindle length 320 mm engine 2 x 11 kW und 3 x 3 kW For profiling and milling windows, doors, individual parts, and similar items with circumferential profiles, including return transport. Cgjdpfx Ajlf H Suja Nop Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic. 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Condition: used, WEINIG UNIVAR 10 corner cleaning machine from a UC-Matic window production line, not functional. - Year of manufacture: 1997 - Sütron BT20 control system - Machine incomplete - Further details on request Cgjdjlf H Sqspfx Aa Nsp - Image for reference only.

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. with IV 68 tool Cjdpfx Asu S Afcja Negp is still in operation ready for demonstration

Condition: used, Year of construction: 2004, Brand: KOCH Type: Windoor 410 Year of manufacture: 2004 Machine Description/Technical Data Machining center for window and front door elements Brand: KOCH Type: Windoor 410 Year: 2004 Work processes: Hinge drillings (sash) Strike plate marking holes Assembly hole drillings (frame) Strike plate milling Strike plate milling (4 mm rebate clearance) Workpiece dimensions: Workpiece length 300 – 4,500 mm Csdpfxewrnh Hj Aa Nogp Workpiece width 20 – 240 mm Workpiece thickness 20 – 150 mm Machine equipped with 2 workstations. Max. machining length for 2 workstations: 1,100 mm Max. machining length for 1 workstation: 2,500 mm Machining units: a) Horizontal drilling unit with 1 fixed-angle spindle at 7 degrees b) Horizontal drilling head with 3 individually selectable spindles c) Horizontal milling unit for locks, strike plate milling d) Vertical milling unit for profile change milling, strike plate milling e) Vertical drilling unit with 5 individually selectable spindles f) Glue application and dowel insertion station, dowels 8 x 60 mm Connection data Electrical connection value 400 V, 50 Hz, 3 phases Voltage fluctuations max. +6% to -10% Immediately available

Condition: excellent (used), Year of construction: 2011, CNC profiling center Weinig Conturex 2 for milling, drilling, and sawing in cross and longitudinal processing Model: C 124 Year of manufacture: 2011 Very good condition Cgjdpfxjypb Ads Aa Nop Working width: 40-260 mm Working height: 25-150 mm PowerGrip clamp table, table support length: 2 x 2280 mm Workpiece length without repositioning cycle: 220 - 2700 mm Workpiece length with one repositioning cycle: 2700 - 4500 mm Workpiece length with multiple repositioning cycles: 4500 - 6000 mm

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Götzinger OBM Plus T Fitting Drilling Machine for Corner and Scissor Rebate Hinges, Handle Olive, and Protective Hardware - Base machine with interchangeable mounting for various drill heads - Machine mounted on chassis with custom-built workpiece supports - Workpiece supports can be folded down and up and locked in place - Pneumatic drilling feed via foot pedal - Centering stop for variable or fixed handle position with measuring scale SPECIAL EQUIPMENT: - Drill head mount adjustable steplessly to spindle spacing via handwheel and SIKO display (zeroable) - Depth stop via 4-position turret - 2 rotation directions for drill heads - Chip evacuation for deep, large-surface drilling (e.g. protective hardware) Complete operating manual in German, in color Well-maintained, very well-equipped machine. Year of manufacture: 1997 Matching drill heads and rulers: (Can be selected as accessories with the machine) Cgjdpfjyrcugjx Aa Nop - Drill head for handle olive (2x available) - Drill head for corner and scissor stay MACO with ruler (2x available) - Drill head for corner and scissor stay SIEGENIA with ruler - Drill head for handle, PZ, protective hardware HOPPE If you have any questions, please feel free to contact us. Machine can be tested on-site.