Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Unirex 3000 machining center Univar 15 Unitex 15 Iedpfx Adjh H Iyxsdjht

Year of construction: 2014, condition: used, PROLOGIC window construction software FenOffice 14 Iedpjrci S Sofx Addoht Conturex

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997 Iedpfxoiix Uve Addoht

Condition: good (used), Year of construction: 1992, Mini tine cutter Hirsch type LQP 180 used For sawing For mini tines For countering For slotting Wood thickness min/max 50/80 mm Angle adjustment range +70/-70 degrees For cross processing of mini-joints and counter profiles. Changeover to +70/-70 degree bevel Length measurement at the stop, Wood clamping with bridge 8 bar Manual feed of the saw and milling carriage, safety circuit, electric brake system Wood thickness max. 80 mm Wood thickness min. 10 mm Ijdoumk Dkjpfx Addsht Profile depth max. 50 mm Saw unit: Three-phase motor 2.2 kW Spindle speed 2800 rpm. horizontal adjustment 50 mm Milling unit: Three-phase motor 4 kW Spindle speed 6000 rpm. Spindle length 100 mm usable Spindle diameter 40 mm Tool diameter 180 mm Weight 850 kg Dimensions 1600 x 1450 mm

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Ihsdpjxvxpgjfx Addet Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Ihjdpfx Adexmamujdet Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, Year of construction: 2017, Number of motors 2x 1.2 kW Stück 0 2800 mm Control ja 0 OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- Sold on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Technical manufacturer's description: Double miter saw for cutting two glazing beads simultaneously. The right saw unit is fixed; the left unit is adjusted via the positioning control. Features of the positioning control: - Monochromatic graphic display 240 x 64 pixels - Display of 30 characters on 8 lines - Keypad with 28 function keys - FN key for interrupting the function - Diagnostics and error messages - Language selection: Italian, German, British, Spanish, French, and Swiss - 10,000 memory lines divisible into 999 cycles, max. 99 lines per cycle - RS-232 interface - Dimensions can be entered manually or via USB interface - 3 correction values ??each for the left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on steel-hardened axes. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is complete, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. Machine features: - Fixed right-hand saw unit - Pivoting clamping device - Positioning control for TRF 527 NC CE - Maintenance unit - Center support - 220 mm Ø carbide-tipped saw blades - Two-hand control - Intermediate support for simultaneous sawing of two glazing beads - Pneumatic saw unit lift - Motor protection switch - Pressure switch - Undervoltage release - Overload switch - Tool set - 2 x 4-position angle star saw holders Technical specifications: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm Ihedpsxmamnjfx Addet - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight 217 kg ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus VAT.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Isdpfx Adsxp U N Nedsht Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment Iodpfx Aoxgkf Ueddjht With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: used, Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Ihjdjxpn Tzepfx Addot Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Ihodpfsxpi Duex Addst Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: AA2/004283, working width: 240 mm, TECHNICAL DETAILS Max. planing width: 240 mm Planer block diameter: 120 mm Number of knives: 4 Electrical data Voltage: 400 V Connected load: 10 kVA General information Year of manufacture: 2017 Weight: 3,350 kg EQUIPMENT - Documentation available Iedswkq Ndepfx Addoht - CE marking present

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2166, working width: 230 mm, working height: 125 mm, spindle diameter: 40 mm, spindle speed (max.): 6,200 rpm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed speed: 6 m/min Maximum feed speed: 28 m/min Spindle speed: 6,200 rpm Spindle diameter: 40 mm MACHINE DETAILS Electrical Data Iedpfjwyviuex Addsht Main fuse: 80 A Machine voltage: 400 V, 3PH, 50Hz Motors Bottom spindle: 5.5 - 7.5 kW Right spindle: 5.5 - 7.5 kW Left spindle: 7.5 - 10 kW Top spindle: 7.5 - 10 kW Dimensions & Weight Dimensions L x W x H: 4,400 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 119676, working width: 230 mm, working height: 120 mm, spindle diameter: 40 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Working height: 8/120 mm Working width: 20/230 mm Feed speed: 5/30 m/min Spindle speed: 6,000 rpm Spindle diameter: 40 mm MACHINE DETAILS Net weight: 2,500 kg Dimensions (L x W x H): 3,620 x 2,140 x 1,650 mm Total power: 41 kW Year of manufacture: 2014 Serial number: 119676 CE marking available: Yes Equipment Spindle – horizontal bottom Spindle – vertical right Spindle – vertical left Spindle – horizontal top Spindle – horizontal bottom Documentation available: No Transport dimensions: 3,620 mm x 2,140 mm x 1,650 mm Transport weight: 2,500 kg Transport packages: 1 Ihjdswtddtspfx Addjt Additional options: Vibration monitoring Machine lamp Speed detection Hour counter Centralized lubrication

Year of construction: 2012, condition: excellent (used), Ruchser roller conveyor for windows with 90° turning device left/right length 4400mm Electrically driven accumulating rollers with 2 parallel system components pneumatically tiltable from vertical 7° outside to vertical 7° inside. Plant parts 1900 mm high with rubber roller strips. Between the rubber strips stainless steel plates 2 mm deeper for sliding surface clip holders. Ihodelpcc Ijpfx Addst Inlet and outlet with edge protection rollers up to 3000mm high as rubber rollers. Infeed track 2000 mm, outfeed track 4000mm driven accumulation rollers. Control and operating element mounted on freely adjustable stand.

Condition: used, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm Ihjdpovu Hfdsfx Addst table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!)

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Ihsdpeu Uvalefx Addjt Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: new, Number of sanding units 1 st. sanding width 150 mm Sanding height max. 150 mm Loewer edge finishing machine MiniSpin N ----- Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Isdpfx Aexmk Ayeddoht Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush

Condition: used, 0 4000,5000 mm Isdpjxmk Amsfx Addoht Working height 120 mm 0 ja

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Working height 160 mm 0 ja Ihedpfx Asxmk Agjddot Control ja

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Working height 160 mm Ijdpfx Adoxmk Aaedjht 0 ja

Condition: new, Number of motors 2 Stück 0 2380 mm Control , RUCHSER RU-GL-45° ----- Glass bead saw on the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage Manually movable mounted. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glazing bead saw 45° on RU-SA-3000 ----- for glazing beads up to 30 x 70 mm (W x H)!!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually mounted movably. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with Ihjdpfx Aoxmkz Njddet side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 1 set of carbide saw blades for for glazing bead saw RU-GL D = 200 mm, 64 teeth, consisting of 1 piece each Saw blade L1233 (left) and L1085 (right), with special grinding 43°. Additional price: 421.00 euros Pos. 1.2 Holding device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing beads Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Item 1.5 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.6 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros ----- Total price i...

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Ihodpfsxmr N Iox Addst Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: good (used), Year of construction: 2001, functionality: fully functional, GUBISCH Centromat CW3 Used machine for window and door production with 50 mm Ø spindles in longitudinal profiling The following parts have already been replaced: Energy chain and electrical wiring to the slot table; Sound insulation mats in the covers; Pneumatic hoses; Bearing for counter disk; Gluing side in the longitudinal area; Rotary encoder for second slot spindle; Bearing for slot table; PC has been cleaned and checked; Various pneumatic cylinders; V-belt. Iedpfx Aoxgqlueddoht

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Iodpfx Ajumci Seddeht Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails