Used woodturning lathes for sale (118)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Swing diameter: 225 mm Turning length: 1,000 mm Diameter over carriage: 1,000 mm Fpodpfx Aao Ad Ezcjnep Feed rate, continuously variable: 9–400 mm/min Feed rate, continuously variable: 4.5–200 mm/min Travel of steady rest: 360 mm Travel of upper steady rest: 220 mm Tailstock diameter: 60 mm Tailstock travel: 170 mm Tailstock adjustment: ± 20 mm Spindle speed: 225–2,000 min⁻¹ MACHINE DETAILS Manufacturer: Zimmermann Type: DZUE 1000 Year of manufacture: 1990 Machine length: 2,500 mm Machine width: 1,000 mm Machine height: 1,600 mm Machine weight: 1,000 kg

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Fjdszfwm Nepfx Aanspp Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 161 kg, input voltage: 230 V, spindle speed (max.): 3,700 rpm, spindle mount: MK 2, input frequency: 50 Hz, Twister FU-200 lathe, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series production, and creative workshop projects. Fodpfx Aaezuyt Rsnjpp Key technical data: - Machine type: Lathe / Woodturning lathe - Center height: approx. 200 mm - Turning diameter: approx. 395 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm - Spindle connection: M33 x 3.5 with ASR Euro safety groove - Tailstock/spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory list - Rotatable and adjustable headstock for flexible machining - Attractive complete package for hobby woodturners, workshops, schools, and makerspaces No warranty

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Fpedpszd Uv Esfx Aanop Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 112902, Title: Intorex CNI 1500 CNC Control Lathe - 2015 Model Description: Experience precision engineering at its finest with the Intorex CNI 1500 CNC Control Lathe, a powerhouse of machining. Manufactured in 2015, this machine embodies reliability, accuracy, and efficiency, making it an ideal addition to any workshop or manufacturing facility. Key Features: Year of Manufacture: 2015 Brand: Intorex Model: CNI 1500 Control: CNC Control Max. Turning Diameter: 300mm Diameter Max. Turning Length: 1500mm Fpjdper Tiukofx Aansp Inc. Drawing and programming Software IntorEDIT (easy to use) Additional Features: Adjustable Tailstock (12 & 18mm), Round steady (90mm Dia & 140mm Dia), 2 pneumatic centerers to facilitate the loading of the pieces Applications: Ideal for precision turning operations in Woodworking / Joinery Reason for Selling: Upgrading to newer equipment. Comes with rolling cabinet for accessories and tooling

Condition: excellent (used), Year of construction: 2024, For sale is a used MIDI PRO bench lathe set in demonstration condition. The machine has been used only sparingly and is in very good technical and optical condition. This compact, yet extremely stable, bench lathe is perfect for bowls, boxes, small vases, and precise turning work. Thanks to the rotatable and adjustable headstock, it offers particularly versatile applications and ergonomic working. Ideal for ambitious hobby turners as well as professional users looking for a powerful and space-saving lathe. Technical data: - Center height approx. 178 mm (turning diameter approx. 355 mm over bed) - Center distance approx. 450 mm (extendable) - Speed ranges 60–1000 / 150–1900 / 350–3700 rpm - Motor 1 HP / 0.7 kW – 230 V - Spindle connection M33 x 3.5 (MK2) - Tailstock MK2 with 100 mm quill travel - Forward and reverse operation - Stable construction, machine weight approx. 67 kg - Incl. machine stand (legs) Advantages: - very compact, stable bench lathe - ideal for precise turning work - versatile due to rotatable headstock - perfect for hobby and professional workshops Fodpfx As Ahhtwjanjpp The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, turning machine, turning lathe, wood turning lathe, turning, turning tools, wood turning, machine

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: C 29, input voltage: 400 V, spindle speed (min.): 150 rpm, spindle speed (max.): 2,900 rpm, spindle mount: MK 3, Hager HG250L and HDG250 lathe with external turning attachment (See invoice for description). Fpjdpfx Aoz D Dmkeansp

Condition: used, functionality: fully functional, Brusa di Garboli LE End Grinding Machine Fpjds Ahwu Tepfx Aansp Minimum diameter: 10mm Maximum diameter: 50mm Maximum component length: 1400mm Minimum component length: 300mm Automatic material feed End grinding using grinding wheels Machine dimensions: 240x82x175cm (H)

Condition: used, functionality: fully functional, machine/vehicle number: 3988, total width: 450 mm, total length: 2,500 mm, total height: 1,000 mm, overall weight: 200 kg, turning length: 1,300 mm, MVM Capri T.1500 Heavy-duty – Professional machine Lathe in a robust design with a convenient copying mechanism Table extension up to 230 cm 4 speeds Left-right rotation Copying mechanism with handwheel Various tool rests Accessories (chuck, discs, etc.) 6 lathe tools Fsdpfxsz R Abzj Aanepp READY FOR USE Price negotiable / VAT can be shown separately

Condition: used, Year of construction: 1985, used in excellent condition low mileage cleaned functionally tested partially refurbished Manufacturer: Flott Type: 484001 Year of manufacture: 1985 Machine no.: 31840024 Manual copying device Fixed tailstock Fedpfx Aasz Np Ironepp Four-jaw chuck Drill chuck mm: 125 Speed stages: 500 - 750 - 1125 - 1700 - 2500 Center distance approx. mm: 1200 Center height approx. mm: 240 Motor kW: 1.5 Space requirement approx. L x W x H mm: 2100x800x1100 Weight approx. kg: 350 Total connection value kW: 1.5 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: like new (used), LATHE FOR WORKSHOP USE For sale: a HAGER HDE-59 BIG lathe with a distance between centers of 1,000 mm. This lathe, which was used in a workshop setting, is in excellent condition. Fjdpfx Ajz Ngb Neanepp Technical data: - Motor: 2.2 kW / 3 hp / 400 V - Speed ranges: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height: 250 mm - Distance between centers: 1,000 mm - Tool rest: 350 mm - Direction of rotation switch - Spindle: M33 x 3.5 mm with ASR (Euro) safety slot - Spindle and tailstock taper: MK3 - Hollow spindle diameter: 20 mm - Main spindle: 4-bearing - Quill travel: 150 mm (with scale) - Overall length: 1,780 mm - Weight: 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, turning machine, turning lathe, wood turning lathe, turning, lathe tools, woodturning, turning, machine, Hager Reference: R-A0117

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - Max. turning length: 1200 mm Fodozu R S Ropfx Aanspp - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimensions of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units - Additional 3 cutting tools on hydraulic pistons (2 installed) - 4 types of spindle speeds - Automatic or manual machine operation - Spindle motor: 9 kW - Hydraulic pump motor: 3 kW - Diameter of extraction port: 90 mm - Dimensions for transport (L/W/H): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit - Original DTR documentation - Unpainted - Used lathe, very good condition Net price: 57,900 PLN Net price: 13,465 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") Fpedotuuv Nepfx Aanep - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Fpsdex Thw Dopfx Aanop Oil pump engine 2.2kw Working pressure 6-8bar

Condition: used, Year of construction: 1989, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: Center-to-center distance: 1000 mm Max. workpiece diameter: 380 mm Fpsdpfx Aaezyy D Hsnsp Motor: 0.9 kW – 240 V Accessories: 3-jaw chuck Faceplate Various woodturning chisels

Condition: used, CATALOGUE NUMBER: 7650 Technical data: - max. working length: 1500mm Fpsdpeztrfcsfx Aanop - max. working diameter: 250mm - milling (disc milling cutter): 7.5kW - spindle – 2800 rpm, 3kW - spindle speed: 700/1200/1500/2000 rpm - grinding unit: 0.75kW - hydraulic motor: 3kW - total power: 17.75kW - air consumption: 6-8 bar - infeed for square stock up to 150x150mm - dust extraction port diameter: 100mm, 160mm - transport dimensions (L/W/H): 4350x2300x1980mm - weight: approx. 3000kg ADVANTAGES: - manufactured in Germany - automatic hydraulic copying device - original technical documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 13930 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2022, Wood rounding tool for straight and slightly curved pieces Minimum diameter 5mm Maximum diameter 65mm Minimum length 350mm Maximum length (with loader) 1500mm (without loader, unlimited) 5.5kW tool motor Feedforward motor 0.75kw Electronic variable speed from 2 to 17 m/min 380V Spindle lubrication Supplied with adjustable tools from 15 to 65mm Also a 30/35mm milling head with exit rollers Fodpfx Aszivlfeanopp Adjustable loader according to workpiece length Machine almost new, very little used Very good deal to seize!!! Supplied with documentation and service keys

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Technical data: - Centre-to-centre distance: 1,300 mm Fjdpfxozrx Sas Aanjpp - Centre height: 250 mm - Motor: 1.4 kW

Year of construction: 2001, condition: good (used), diameter of obtained rollers 180 - 300 mm the minimum length of the processed logs is 1200 mm number of milling units 2 pcs (upper, lower) power of the rotating head drive motor 55 kW Fpodpfjih H I Djx Aansp power of the motors of the milling unit drive 2 x 11 kW power of the drive motor of the feed system 7.5 kW cutters included

Condition: excellent (used), functionality: fully functional, LATHE FOR WORKSHOP USE For sale is a Drechselmeister Twister FU 200 lathe with a center distance of 715 mm. This lathe, which was used in a workshop setting, is in very good condition. Technical data: - Center height 200 mm - Turning diameter 395 mm (with optional external turning attachment, 700 mm) - Center distance approx. 715 mm (optionally extendable) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 boring quill Fedozn Nm Tepfx Aanopp - Motor 1.5 kW / 2 hp (connection 230 V) - Brake switch, 2-stage - Weight of base model 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, machine tool, woodturning lathe, turning, lathe tool, woodturning, turning, machine Reference: Turning at B.

Condition: used, Year of construction: 2009, machine/vehicle number: 450124, For sale is an Intorex MV-3 automatic boring and screw/bush inserting machine for woodworking. This specialized high-production machine is designed for fast drilling and inserting of threaded bolts, hanger screws, or bushes into solid wood components like sofa legs and furniture feet. The machine features a 3-station rotary index table and is configured as follows: • Position 1: Manual loading and unloading of the component Fodpfx Aaj Agvm Ronopp • Position 2: Simultaneous drilling from above and below (equipped with both top and bottom boring units) • Position 3: Bottom-up screw/bush insertion unit • Special Feature: Equipped with an automatic Vibrating Bowl Feeder for continuous, automated sorting and feeding of screws or threaded bushes. Technical Specifications: • Manufacturer: Intorex (Spain) • Model: MV-3 • Voltage: 400 V / 50 Hz • Configuration: Top & bottom drilling / Bottom-up inserting • Feeding System: Fully automatic vibrating bowl feed • Max. Component Length: 320–400 mm • Max. Component Diameter / Square: 100–115 mm • Condition: Used, fully operational, directly from production.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg Fpjdpfxewudkis Aansp The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Fpsdpfx Aoy N R A Ioanep Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), EXHIBITION MACHINE Fpodjzw A Tlopfx Aanep For sale is a like-new ECO DB2 lathe with a center height of approximately 300 mm. The exhibition machine is in its original condition, therefore you receive the full warranty. Technical data: - Center height approx. 300 mm - (or approx. 400 mm with extended bed) - Maximum turning diameter approx. 590 or 794 mm - Center distance approx. 508 mm - (or approx. 1,016 mm with extended bed) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Motor 2.2 kW / 3 HP (230 V connection) with frequency converter - 3 speed stages: 20 – 650, 50 – 1,750, 100 – 3,850 rpm - Clockwise/counterclockwise rotation - Headstock and tailstock taper MK2 / bore 10 mm - Tailstock quill travel 120 mm - Indexing 36-step - Hand rest tenon 25.4 mm - Dimensions (L x H x D approx.) 1,565 (2,073) x 1,286 x 765 mm - Weight approx. 250 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related terms: Lathe, turning machine, lathe machine, wood lathe, turning, lathe tool, wood turning, turning, machine Reference: R-A0117

Condition: excellent (used), working length 1200 mm 3 rotating knives Fjdpfx Aaoxqtyconopp automatic feed element feeding from magazine turning according to template or finished part two auxiliary knives ocular power supply 380V