Used Barrels for sale (227)

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min Kdsdpfx Aep E Eglsg Uon working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any Kodpep E Ed Rjfx Ag Ujdn work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Year of construction: 2001, condition: used, The line is suitable for high-quality mono film production with automatic thickness control, IBC cooling, and full surface treatment capability. Single-layer blown film extrusion line based on a 120 mm extruder with a 30:1 L/D ratio and water-cooled grooved feed section. Die Head Kjdpfxszcz Rus Ag Ujdn • Model: TE594 • Die diameter: 350 mm • Die gap: 1.5 mm Metering System • 4-component gravimetric system (Octagon configuration) Cooling & Control • Plast-Control GmbH Procon automatic air ring & profile control • K-Design GmbH USBC-4-G2 IBC with WR-4 width control Corona Treatment • AFS G100S • Double treater station, 2600 mm width Take-up & Winding • 2800 mm take-up and winding unit • Oscillating take-up with gusset boards • Erhardt+Leimer GmbH web guiding system • 3” and 6” air shafts Recently replaced (less than 12 months of use, original Macchi parts): • Main motor • Gearbox • Screw & barrel • Mixing tip • Grooved feed section

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Kjdoh U Rznepfx Ag Uodn Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: used, first registration: 07/1980, color: grey, gearing type: mechanical, suspension: other, , Otto Klein water barrel vacuum barrel capacity 4.000 l year of construction 1980 suction hose pump overhauled hydraulic opening/closing immediately ready for use FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE For further questions please contact Mr. Faller at the number. //*EXCHANGE, PAYMENT ACCEPTANCE OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Kedpfxjt Aikus Ag Usdn

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: Kdedeu Idvwepfx Ag Uen - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm Kodpfx Ageu Idxfs Uodn dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) Kedpfx Aju Idv Dog Ujdn - control panel - manual switch i.D. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed Kdjdpfx Aeu Idwbjg Uen - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor Kdjdou Idxrjpfx Ag Ujn - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Kedpfxeyyz Dde Ag Ujdn Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Ksdpoyhbt Hsfx Ag Usdn Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Year of manufacture: 2019 Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Initial filling: 260 liters Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine • Very robust industrial design • High processing performance • Ideal for series production and precision machining Kdsdpfx Agozb Ab Ee Uen Inspection possible by appointment. Location: Göppingen, Germany

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Kedpfsv Stbmsx Ag Usdn Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Kdsdpfx Agoxhfuao Usn Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Kdedszc N Axopfx Ag Usn Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: used, oil 10W30 fully synthetic Duramax Barrels with 20 liters Cevoman bvba. Lenskensdijk 5 Ksdpfx Aey R Ntusg Ujdn 2200 Herentals Belgium

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Kdodorq Hmzspfx Ag Usn Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Kdedpfxsttxg Ij Ag Ujn Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: new, mileage: 100 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, total width: 2,550 mm, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, MAN TGM 26.320 6x2/4 Beverage Truck | Wingliner Beverage Body | Dhollandia Side Loader | CODE XL * MAN D08 engine with 320 HP * Euro 6e emissions standard * MAN TipMatic automatic transmission * Cruise control with adaptive distance control (ACC Stop & Go) * Multi-stage MAN EVBec engine brake * Hill-start assist & anti-roll-away function * Rear axle differential lock Kdodjy R Hiyopfx Ag Uen * Axle ratio optimized for distribution transport * Rear air suspension * Lift and steerable axle (highly maneuverable) * Electronic braking system (EBS) with ABS * Disc brakes all around * Digital axle load display * Tire pressure monitoring system (TPMS) * Rockinger trailer coupling (high traction) * Gross train weight up to 33,000 kg * Emergency brake assist (EBA) * Lane departure warning * Lane change & turn assist * Traffic sign recognition * Driver attention assistant * Reverse warning (acoustic) * LED rear lights * LED side marker lights * Automatic hazard warning at emergency braking * MAN CC cab (compact, excellent visibility) * Air-suspended premium driver’s seat with seat heating * Multifunction leather steering wheel * Air conditioning (Climatronic) * Digital instrument cluster (12.3 inch) * MAN Media System Professional with navigation * Smartphone integration * Digital mirrors (MAN OptiView) * Sun visor & sun blind * Refrigerator in cab * Electric windows * Central locking with remote control * Rain sensor & light sensor * LED headlights incl. turning light * 12V & 24V sockets in cab * Prepared for LED work lights * Main battery switch * Rear-view camera pre-installed ----Wingliner Beverage Body (Classic) The Wingliner Classic beverage body allows for particularly fast and convenient loading and unloading from both sides of the vehicle. This significantly reduces downtime and optimizes workflows. Sidewalls open on both sides: * Loading length approx. 6,800 mm * Loading height approx. 2,100 mm * Sandwich panel roof * Robust, reinforced composite sidewalls * Hydraulically locked upper rails * Remote control incl. Bluetooth * Excellent accessibility for forklifts and side loading ----Tail Lift / Dhollandia Side Loader * Specially designed for the beverage and distribution sector * High load capacity * VDI-certified * Suitable for pallets, roll containers, and barrel goods ----Load Securing CODE XL Certification according to DIN EN 12642 * Legally compliant load securing without additional straps * Meets the highest requirements for commercial transport * Especially suitable for beverages and heavy palletized goods ----Typical Areas of Application in Beverage Trade * Breweries * Wholesalers * Logistics and distribution transport * Pallet and barrel logistics ----Your Advantages * Dual-sided loading saves time and reduces costs * High-quality Wingliner beverage body * Dhollandia side loader for heavy loads * CODE XL certified * Exceptional maneuverability despite 26 t gross weight * Ideal for urban and overland transport We are happy to provide further information upon request.

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Kdedey Tx Rbjpfx Ag Usn

Year of construction: 2009, condition: ready for operation (used), Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible. Kedpfxjy Tx Rno Ag Usdn

Condition: new, mileage: 100 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, MAN TGM 26.320 6x2/4 Beverage Truck | Wingliner Beverage Body | Dhollandia Side Loader | CODE XL * MAN D08 engine with 320 HP * Euro 6e emissions standard * MAN TipMatic automatic transmission * Cruise control with adaptive distance control (ACC Stop & Go) * Multi-stage MAN EVBec engine brake * Hill-start assist & anti-roll-away function * Rear axle differential lock * Axle ratio optimized for distribution transport * Rear air suspension * Lift and steerable axle (highly maneuverable) * Electronic braking system (EBS) with ABS * Disc brakes all around * Digital axle load display * Tire pressure monitoring system (TPMS) * Rockinger trailer coupling (high traction) * Gross train weight up to 33,000 kg * Emergency brake assist (EBA) * Lane departure warning * Lane change & turn assist * Traffic sign recognition * Driver attention assistant * Reverse warning (acoustic) * LED rear lights * LED side marker lights * Automatic hazard warning at emergency braking * MAN CC cab (compact, excellent visibility) * Air-suspended premium driver’s seat with seat heating * Multifunction leather steering wheel * Air conditioning (Climatronic) * Digital instrument cluster (12.3 inch) * MAN Media System Professional with navigation * Smartphone integration * Digital mirrors (MAN OptiView) * Sun visor & sun blind * Refrigerator in cab * Electric windows * Central locking with remote control * Rain sensor & light sensor * LED headlights incl. turning light * 12V & 24V sockets in cab * Prepared for LED work lights * Main battery switch * Rear-view camera pre-installed ----Wingliner Beverage Body (Classic) The Wingliner Classic beverage body allows for particularly fast and convenient loading and unloading from both sides of the vehicle. This significantly reduces downtime and optimizes workflows. Sidewalls open on both sides: * Loading length approx. 6,800 mm * Loading height approx. 2,100 mm * Sandwich panel roof * Robust, reinforced composite sidewalls * Hydraulically locked upper rails * Remote control incl. Bluetooth * Excellent accessibility for forklifts and side loading ----Tail Lift / Dhollandia Side Loader * Specially designed for the beverage and distribution sector * High load capacity * VDI-certified * Suitable for pallets, roll containers, and barrel goods ----Load Securing CODE XL Certification according to DIN EN 12642 * Legally compliant load securing without additional straps * Meets the highest requirements for commercial transport Kodpfxsx Nb Hkj Ag Usdn * Especially suitable for beverages and heavy palletized goods ----Typical Areas of Application in Beverage Trade * Breweries * Wholesalers * Logistics and distribution transport * Pallet and barrel logistics ----Your Advantages * Dual-sided loading saves time and reduces costs * High-quality Wingliner beverage body * Dhollandia side loader for heavy loads * CODE XL certified * Exceptional maneuverability despite 26 t gross weight * Ideal for urban and overland transport We are happy to provide further information upon request.

Condition: new, mileage: 100 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, total width: 2,550 mm, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, MAN TGM 26.320 6x2/4 Beverage Truck | Wingliner Beverage Body | Dhollandia Sidelifter | CODE XL * MAN D08 engine with 320 HP * Euro 6e emission standard * MAN TipMatic automated transmission * Cruise control with adaptive distance control (ACC Stop & Go) * MAN EVBec engine brake (multistage) * Hill start assist & roll-away prevention * Rear axle differential lock * Axle ratio optimized for distribution transport * Rear air suspension * Lift and steer axle (highly maneuverable) * Electronic braking system (EBS) with ABS * Disc brakes on all axles * Digital axle load indicator * Tire pressure monitoring system (TPMS) Kdedjx Nb Hdepfx Ag Ujn * Rockinger trailer coupling (high towing capacity) * Gross combination weight up to 33,000 kg * Emergency brake assist (EBA) * Lane departure warning * Lane change & turning assistant * Traffic sign recognition * Driver attention warning * Acoustic reversing warning * LED rear lights * LED side marker lights * Automatic hazard warning in emergency braking * MAN CC cab (compact, clear overview) * Air-suspended premium driver’s seat with seat heating * Multifunction leather steering wheel * Air conditioning (Climatronic) * Digital instrument cluster (12.3 inch) * MAN Professional Media System with navigation * Smartphone integration * Digital mirrors (MAN OptiView) * Sun visor & sun blind * Refrigerator in driver’s cab * Electric windows * Central locking with remote control * Rain and light sensor * LED front headlights incl. cornering light * 12V & 24V sockets in driver’s cab * Prepared for LED work lights * Main battery switch * Rear-view camera pre-installation ----Wingliner Beverage Body (Classic) The Wingliner Classic beverage body enables particularly fast and convenient loading and unloading from both sides of the vehicle. This significantly reduces downtime and optimizes workflows. Side walls open on both sides * Loading length approx. 6,800 mm * Loading height approx. 2,100 mm * Sandwich panel roof * Robust, reinforced composite side walls * Hydraulically locked upper belts * Remote control incl. Bluetooth * Excellent accessibility for forklifts and side loading ----Tail lift / Sidelifter Dhollandia Sidelifter * Especially designed for beverage and distribution transport * High load capacity * VDI-certified * Suitable for pallets, roll containers, and barrel goods ----Load Securing CODE XL Certification according to DIN EN 12642 * Legally compliant load securing without additional lashing straps * Meets the highest requirements in commercial transport * Especially suitable for beverages and heavy pallet goods ----Typical Areas of Application Beverage Trade * Breweries * Wholesale * Logistics and distribution transport * Pallet and barrel logistics ----Your Benefits Loading from both sides saves time and costs * High-quality Wingliner beverage body * Dhollandia sidelifter for heavy loads * CODE XL certified * Excellent maneuverability despite 26 t gross weight * Ideal for urban and long-distance transport For further information, we are happy to assist you.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D Kdjdpfx Ajycuuyeg Uon • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.