Used Cereal Bar Line for sale (32,861)

Condition: good (used), Year of construction: 2009, Line for the production of "B" type energy-absorbing barriers, SIGMA posts and semi-closed channels For 460 x 4.2 mm strip. Weight of the whole set about 25,000 kg. The line includes the following sections: Strip uncoiler with hydraulic jack for new coils. Tjdpfx Ast Ak Dpodljf 1 roller unit + guillotine. Manipulator. Welding area. Rolling section: -rollers for profiling SIGMA post, -rollers for the "B" guide and the semi-closed channel. Bean punching machine. Punching machine for top holes. Punching machine for bottom holes. Controller with display. Instruments for SIGMA post. Instruments for semi-closed channel. Instruments for marking.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Todswbqx Hepfx Adlef Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: good (used), Year of construction: 2009, Technical Specifications - Year: 2009 - Location: Germany - Availability: Immediate - Current Condition: Dismantled; can be reassembled for testing with materials Printing Features - Number of Colors: 8 - Printing Width: 330 mm - Printing Repeat Range: 8 mm - 24 mm - Max Unwind Diameter: 1000 mm Additional Specifications - Material Width: 350 mm - Max Mechanical Speed: 200 m/min Suitable Materials - Paper - Light cardboard - Adhesive paper Additional Components - Unwinder: Equipped with FIFE Electronic Web Guide - Laminating Unit: Cold laminating unit on rails - Backside Printing Unit: Paper tipping unit on rails Drying System - UV Dryers: 8 UV RAY ovens, 330 mm each Tedpfxsu N Hldo Adlof - Ventilation: 8 fans - Control Cabinet: For command protection and control Converting Unit - Die-Cutting Unit: Configured for two dies, with one die included - Scraping Unit: Pneumatically adjustable pressure roller - Longitudinal Cutting: Rotary blades with pneumatic control - Die Position Adjustment: Micrometric, electrically adjustable longitudinally and transversely (+/- 10 mm) Rewinding Unit Additional Features - Magnetic cylinder replacement organizer - FIFE Video Camera

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Manufacturer BARBERAN Model ECOLINE 1400 S Type of machine Laminating machine Year of manufacture 2007 Readiness dismantled / stored Technical data: Material width max mm 1300 Principle Thermal lamination Film storage Tedpfx Aerur Txodlof Width of film max mm 1300 Material thickness min mm 3 Material thickness max mm 70 Feed rate max m/min 25 Feed rate infinite Machining Single-sided Clamping Steel roller Vacuum Brushing machine Glue application Roller application Storage space 1 Heating device Infrared CE mark

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Todpjxy Ng Refx Adlef Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: new, empty load weight: 6,565 kg, maximum load weight: 32,435 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 94 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: silver, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Reference no. for inquiries: 998877 Krone, SD * Year of manufacture: New vehicle * ABS, Anti-lock Braking System * Air suspension * Lift axle * Brand new tarpaulin Tedpfx Adsv Th N Uolsf * Neutral tarpaulin * Edscha / sliding roof cover * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing perforation in the outer frame (Multilock outer frame) * Portal doors * Pallet box * Air connection coupling head (red + yellow) * Connecting plug 2x7-pin * Connecting plug 15-pin * Lifting and lowering device * Storage box / toolbox * Suspension type: air * Gross weight: 39,000 kg * Unladen weight: 6,565 kg * Payload: 32,435 kg * Perm. gross weight: 39,000 kg * Axle manufacturer: Krone * Tire condition 1st axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,620 mm, W=2,480 mm, H=2,800 mm * Internal volume: 95 m³ * Pallet spaces: 34 * TPMS = Tire Pressure Monitoring System * Smart Tyre Monitoring as per ECE R141 * Telematics: KSC ProPlus Dry 2 Disclaimer: Subject to change, prior sale, and errors. More images and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and easy financing options * Application for all (export) documents * Procurement of export license plates / customs plates * Vehicle reconditioning: new tarpaulins, labelling, paintwork, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Please contact our trained specialist staff – we are happy to advise you.

Condition: ready for operation (used), controller model: Fanuc 310i, empty load weight: 10,000 kg, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Tedpfxov Rwltj Adlof Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Condition: used, empty load weight: 6,400 kg, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/1900, loading space volume: 57 m³, suspension: air, tire size: -, Year of construction: 1900, * Volume 57.3 m³ * Aluminium rims * Spare wheel holder * Side tarpaulin * Universal double rear door * 2 hatches * Aluminium walkway * 1st axle liftable * 4 LED work lights * PVC toolbox * Tool holder * Aluminium ladder 3.5m * Auto suspension lowering * Towing eye * Coupling height 1170 mm * Floor 6mm * Sides 4mm * Water tank 50L * Internal dimensions 10.60 x 2.41 x 2.20 m Liftable axle Tyre information: GOOD YEAR 385/65R22.5 Area: 25.546 m² Width: 2.41 m Height: 2.2 m Grain tipper body Body: Aluminium Door: Universal Manufacturer Delivery time (days): 1 Condition: New Todpfxew Ihtgo Adlsf

Condition: new, empty load weight: 7,250 kg, maximum load weight: 28,750 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, total length: 2,550 mm, total height: 138,600 mm, suspension: air, construction height: 4,000 mm, Equipment: ABS, | Krone Dry Liner box trailer | Spare wheel holder | Krone axles with disc brakes | Anchor rails for load securing | 13 pairs of lashing rings recessed into the floor | Interior height 2715mm | Loading height 2650mm | Tires 385/65R22.5 | Daily registration 6.2024 | Rental possible. Errors, input and advance sales excepted. Tedjl Sn Dfspfx Adlsf

Condition: used, empty load weight: 7,451 kg, maximum load weight: 25,549 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 06/2015, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Krone SD Tautliner | Edscher hood | BPW axles with disc brakes | Toolbox | Tires: 385/65 R22.5 | Coil | Errors and omissions excepted. | Sale only to traders Todpsuq Nh Aefx Adlof

Year of construction: 2022, condition: used, Year of manufacture: 2022 New: No Tedpfx Adex Af S Ielef Model year: 2022 Colour: Grey Dimensions (L x W): 1700 x 2400 cm Suitable for: trucks General condition: good Technical condition: good Visual condition: good

Condition: reconditioned (used), functionality: fully functional, used beating and stirring machine / planetary mixer Bear / Bär Varimixer AR60/MK1, overhauled, 60 liters, with bowl and 2 tools, 1.9 kW, 4.9 A, 50 Hz, 400 V, machine no. 60001933 Tsdew Hulzjpfx Adlef

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm Tjdpfx Adoxbui Telof maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition Tjdpfx Aovw Egrjdlef

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Tedpfxsxyq Ics Adlef

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. Tjdpjxbta Djfx Adlef With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, LINE GICAMILL S24/6000 gantry milling machine from 1990. CNC NUM 760F. X 6000, Y 2600, Z 1000. Table size 6000 x 2000 mm. Distance between columns 2445 mm. Clearance under crossbeam 1335 mm. Spindle 35 kW, 1620 rpm. Siemens motors. Tedexu U Rwopfx Adlef

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Tjdpfevllbrjx Adlof Spindels bore 42 mm IRCO feeder bar All manuals and documentation available

Condition: ready for operation (used), total height: 1,900 mm, total length: 1,250 mm, total width: 2,200 mm, empty load weight: 1,000 kg, nominal power: 3 kW (4.08 HP), Semi-automatische lintzaag Hydraulisch klemmen Normaal koelsysteem + verstuiveroptie Digitale uitlezing voor snijhoek Rollenbanen inbegrepen Depth of throat: 500 Max height of workpiece: 335 mm Tedjxcqixspfx Adljf Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm

Condition: excellent (used), Weber Maschinenbau GmbH mobile outfeed belt Type: CCE Number: 2705 Year of construction: 08/2008 Tsdpfjv T Aq Tex Adljf Belt width: (2x) 420 mm Total dimensions outfeed belt: 3160 mm x 1320 mm x 1480 mm.

Condition: new, Part Number M0297 – For custom furniture manufacturing – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500mm fence frame – Complete set of spacers included – Brand new machine TECHNICAL DATA - Number of spindles: 23 - Distance between spindles: 32mm - Total center-to-center distance: 704mm - Maximum tool diameter: 40mm - Maximum drilling depth: 65mm - Max. workpiece size: 740 x 3000 x 200mm - Height of worktable: 860mm - Worktable dimensions: 949 x 350mm - Drilling head tilt: 0-90° - 2 independent pneumatic cylinders - Spindle speed: 2800 rpm - Motor power: 1.5 kW - Operating pressure: 6/8 bar - Dust extraction port diameter: 80mm - Machine package dimensions: 1115 x 950 x 1050mm - Frame package dimensions: 1500 x 120 x 60mm - Net/gross weight: 271kg/301kg Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) Tsdpfx Aoxbzkwedlof (Prices are subject to change with significant exchange rate fluctuations) PRODUCT FEATURES The Maggi Ms704 is a multi-spindle drilling machine designed for rapid production of custom furniture. The MS 704 is a compact machine capable of managing the production process from start to finish, including drilling carcasses, hinge fronts, and any type of system drawers from any brand. The drill allows comprehensive machining of all hole types, in all common technologies: for confirmats, dowels, connectors, mounting holes for runners, shelf pins, hinge cups, and mounting holes for guides and actuators. The worktable width, without removing side stops, is 740mm, so you can drill components with greater-than-standard depths without limitations. The machine is equipped with a patented 1500mm fence frame, allowing processing of workpieces up to 3000mm long, independent of the 32mm system. A new concept for furniture element drilling allows for fast material processing without needing to retool the machine. The fence frame is a fixed part of the device. Unlike conventional drilling machines, the main operational axis is perpendicular to the drilling head, not parallel. The MS 704 is also equipped with adjustable pressure beam height, making it possible to work with materials up to 200mm thick. The clamps are powered by independent circuits and are equipped with valves for safe operation, allowing one clamp to be switched off when machining smaller components. The MS 704 comes as standard with a drill bit magazine and a complete set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: used, functionality: fully functional, Year of construction: 2018, Sandwich panel line, roof 30, 50, 80, 100 mm, wall 50, 80 mm, facade 50, 100 mm Tedpoxcinasfx Adlsf

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler Todpexz Aytjfx Adlsf - Number of stations: 15 - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard - Year: 2009

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Tedpfsr Ak S Njx Adlof Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40

Condition: like new (used), Used Filling Line NP 657 | COMPLETE PET AXETIC BOTTLING LINE Year: 2011 Speed: 500 ml 30,000 bottles/hour Tjdpeuyhdvofx Adlof 1000 ml 24,000 bottles/hour 1500 ml 18,500 bottles/hour Production: fruit juices and tea Filling method: aseptic, volumetric Filling temperature: 18-24°C Sizes: 500 ml, 1000 ml and 1500 ml Bottle type: PET bottles Stopper for bottle Standard 28 mm Product: still only Sterilization type: aseptic sterilization PET Blow Molding Machine Krones Contiform Series 3 Krones Aseptic Filling Monoblock Steriljet sterilizer Variojet Rinser Filling machine Capper Aseptic Ventilation Isolator VARIO DOS LIQUID ASEPTIC Hygiene Center Sterile Water Treatment AQUA ASEPT Bottle Coding Matrix Laser DDC3 Checkmat FM-X+L fill level sensor PCS process control system KZE product treatment (plate), sterile tank, rework container CIP-System cleaning system Condensate lifting system Krones Contiroll labeler Krones Variopac shrink wrapper Twin Pack handle applicator Krones Robobox Palletizer SYNCO Bottle Conveyor Belts