Pointing milling machine SCB 75 CNC
Main spindle characteristics:
Minimum milling diameter - 15 mm
Maximum milling diameter - 75 mm
Maximum clamping diameter - 90 mm
Maximum milling length - 250 mm
Speed range of the main spindle: 0 – 800 RPM
Longitudinal feed speed : 10 – 600 mm/min
Power of the main motor: 40 kW
Maximum torque of the main spindle: 1.200 Nm
No. of inserts: 4
Maximum operating time for one roll-bar: 2 minutes
Maximum feeding and exit time, included in the operating time: 0.4 mi...
Production year: 2009
Chain feeders and work benches
A line for cutting structural steel - smooth and ribbed, and an automatic double-head bender for bending structural steel. Possibility to process bars with a thickness of 8 mm to 40 mm.
Steel bar cutting line OMES FLEXI 009
Production year: 2009
Length: 31000 mm
Width: 9650 mm
Engine power: 28.7 kW
Chain feeders and work benches
Line for cutting structural steel - smooth and ribbed. Rods with a diameter of 8-40 mm.
Automatic double-head be...
1500mm line bar with mechanization
Bficgz3svo
Power75cv
Another 242 days
Honda WE1 Tailgate Manufacturing Line
• Nippo Hydraulic hemming press, platen bed size 2.5m x 2.54m, stroke: 1,450mm, open height: 2200mm, shut height: 750mm, maximum pressure force: 150 tonne (This is controllable to 3 pressures 150 tonne - 90 tonne - 100 tonne), cycle time: 19.6 secs, fast speed down maximum: 360mm/s, fast speed up Maximum: 340mm/s, die changer maximum load: 30 tonne, die changer transfer maximum speed: 7.5m/min
• (5) Fanuc R2000iB/165F Spot tool robot, 165kg payload with Fanu...
Hobart Dishwasher
Model: BÄKO-line All in
Double bag system
2 liters of fresh water consumption
EasyClean System
Rinse aid and detergent dispensing pump
extra deep interior for plates 600 x 400 mm
incl. built-in softener
Sequence / drain pump
DGUV V3 tested
with warranty
Included Accessories:
1 basket
1 Universalkorb
9u8m9zsuw
1 cutlery basket with 4 boxes
Inlet and outlet hoses
Ruecksaugverhinderer
Another 242 days
• Hirotec Hydraulic hemming press platen, bed size 2.4m x 2.4m
• Fanuc R2000iB /210F Spot tool robot 210kg payload with Fanuc RJ3iC Controllers (2007) S/N Robot R01206276, S/N of controller S/N E07202182
• (2) Fanuc R2000iB /165F Spot tool robot 165kg payload with Fanuc RJ3iC Controllers (2007) S/N Robots R07206263, R07206265 S/N of controllers E07202178, E07202180
• Fanuc M710iC/70 sealing robot 70kg payload with Fanuc R30iA controller (2008), Robot S/N R08500485, controller S/N E8500253
B7nttc...
CNC Gildemeister Sprint 32 Linear + FMB bar loader
Manufacturer: Gildemeister
Type: Sprint 32 Linear
Year of construction: 2003
condition: used
Machine switch-on time in h: 52782
Automatic mode in h: 38234
Fanuc 160 iTB control
Axles: 6+2
Main and counter spindle
Tool drive
turning diameter max. 33 mm
turning length Z1: 120 mm
Main spindle:
Max. Speed 8.000 min/-1
Drive power - main spindle 7.5 / 5.5 kW
Sledge I:
x-path 1: 65 mm
y-path 1: 350 mm
Tool places 6 / 4 pos.
Fixed stations 6
driven sta...
VFFS machine AM019 SERVO, equipped with an 8-head weigher ATD08-R, used for dosing and packaging of grain and granular product.
The line could be equipped also with a different feeding conveyor, according to the produt being packed.
An aspiration unit is connected to the line, making it highly suitable for grains with high dust accumulation (like sugar).
Mibsy9d
Line includes (1) Extruder BARMAG/ REIFENHÄUSER/ PLAMEX/ ER-WE-PA, screw diameter: 40/ 60/ 60/ 40mm (2) Winder SNL S2000, output: 60-200kg/h, speed: 2-150m/min, including thickness measuring radiometry and additional accessories.
Bl79zqyc2n
Painting line Giardina - Barberan:
Bjnrugg3r8
- Putty roller Giardina
- UV oven Giardina
- Painting roller Barberan
- Painting roller Barberan finishing (laser roller)
- UV oven Barberan
FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines:
VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12
VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15
VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from
lenghtwise to crosswise) with double cone system
VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30
VZ0200E) In-feeding Ro...
Automatic line for laminatig panels with PVC or HPL BARBERAN 2200
Manufacturer BARBERAN
Production year 2011
Bfoadzur8v
Test machine, worked 3 months - condition as new
Line width 2200 mm
The machine consists of the following components:
- roller feeder
- BARBERAN LP 2200 - a machine for cleaning boards before applying glue
- BARBERAN EN-PUR-2 - 2200 glue applicator with aggregate feeding polyurethane PUR glue
- BARBERAN CAL-H-2-2200B - press for laminate sticking (PVC or HPL) with side fee...
VFFS machine AM020 SERVO, equipped with a 14-head multihead weigher with 5.0ltr hopper volume, used for dosing and packaging of fresh salads in "pillow" bags. The line is also equipped with a label applicator, for automatic applying of labels on the ready bag.
Mflygk0
The bag formers are easily changed according to the customer requirements.
The line is also equipped with a specially deisgned feeding conveyor, which keeps the product from damage.
LINE (half line) of Double-side Sizing-Milling & Edge Banding, with max working width mm 2500, with automatic fast handling system. Composed of the following machines:
ZV0200A) LOADER (SINGLE-CAGE) "BARGSTEDT" TBH 500 / EL / 25 / 12
ZV0200B) TURNING DEVICE FOR PANELS (LENGTHWISE TO CROSSWISE)
"HOMAG" TDL /310 /25 /12
ZV0200C) Double-side SIZING and EDGE BANDING machine "HOMAG"
ZV0200D) TURNING DEVICE FOR PANELS (CROSSWISE TO LENGTHWISE) "HOMAG" TDL 510/25/12
ZV0200E) UNLOADER (BRIDGE-F...
VFFS machine AM019-LB, equipped with a 4-head linear weigher ATD04-G for dosing and packaging of granular products and grains in Stabilo bags. The line is also equipped with a label applicator EME, for automatic applying of labels on the ready bag.
The Stabilo bag formers are easily changed according to the customer requirements.
Y9eaetfn
The line is also equipped with a PVC feeding conveyor and output transport belt "HIGH GRIP".
A pair of VFFS machines AM019, synchronized with two 14-head multihead weighers for maximum capacity and accuracy. The maximum capacity of the line is up to 140 bpm.
The line is fed by a single feeding conveyor with a PVC belt, synchronized with a double belt distribution system
Bffd80blzg
The shearline consist of 12 m inlet, shear Simplex 45 HV, 12 m measuring table with kick off to both sides, one side collecting bins and other side conveyor who feed to bending lines.
Machine info:
The shearline is a mix of Pedax and Difer machine. The storage rack has the feature of storage of bundles inside. The shear is Simplex 45 HV from Pedax. One bender is an old 32 PKA and one newer 42 CB. All parts are working.
The shearline consist of 12 m inlet, shear Simplex 45 HV, 12 m measuring ta...
Machine info:
N7had
Collecting cart L=12m
Technical means data
General data
Manufacturer: DIANFOL
Model: TSK-450 5L FILM BLOWING MACHINE
Mileage: nie ustalono
Year of manufacture: 2018
Technical parameters
Description
Production line for the production of barrier foil.
Technical description
Technological train for the shrink film was given for recognition.. Machine was completed from Chinese parts.
During the recognition the brand and the model of the machine were not set because of the lack of unit rating plate.
Recognition was carrie...
CAMBIO 45 roundwood debarker
AIR TEN rotor
PIRAMY knife systems
Cppoto8g
Debarker will be sold after the overhaul
The line is virtually new. It was installed at the end of 2012 and stopped in March 2013. The line has approximately 200 working hours (due to the sharp increase of price for logs in comparison to the price for saw dust). We purchased the line in 2016 for the purpose of peeling wood for pellet production. As was the case with the initial buyer, we never installed the line because the use of sawdust was more economical.
The line is fully automated, equipped with a metal detector and optical sen...
Subfamily:
Loader
Max. Length of the panel:
2500 mm
Max. Width of the panel:
1300 mm
Introduction of the panel stack:
yes
Introduction of the panel stack:
with motorized roller conveyor
automatic rotation system of the panel:
yes
Motion system with frame:
yes
System:
with suction elements
...
alesa monti S.r.L. - Barosso(VA) / Italy
Fraes and drilling rigs with movable or fixed stem and spindle diameter from 100 mm to max 150 mm
The Alesamonti drilling and fraes ingess are constructed on the production of a 40-year-old experience. These are compact, fast and powerful machines, which are already equipped in standard performance with a large selection of hoes suitable for any production requirement.
- High stiffness thanks to the large design of the structures made of Italian cast i...
Max print width – 330 mm
Max material width – 350 mm
Repeat length – from 8” to 24”
Number of colors - 7
GEW UV dryers
Mechanical speed – 200 m
Power consumption – 54 kW
Main engine power – 7.5 kW
Dimensions - 860 x 135 x 120 cm
1 Unwinder Assembly Frames
4 Double Frames Printers 1,2,3,4,5,6,7
1 Framework for Processing Team 1 1 Framework of the winding unit
7 cooled drums
1 16 kw fridge
1 Clip
1 Delam /Relam
1 Cold pressing / laminating unit 10 anilox cylinders
35 Printing cylinders
5 magnetic ...
Pneumatic cylinder, compact cylinder
-Dattenberg SZ -50 / 50
-Hubweg 50 mm
Dwlsx3
-Piston rod Ø 16 mm
-Dimension 60/60 / H185 mm
-Weight 1.1 kg
General Data
Hmzat80
Measurements height 4595 mm
Machine weight 51000 kg
Main Drive
Spindle speed range 2500
Table
Outer length 2115 mm
Outer width 10000 mm
Tslots size 28 mm
Distance between table: 700 mm
This Forest Line Seramill 240 Milling Machine was built in the year 1990. This machine operates with a spindle speed up to 2500 rpm, and a cutting speed of 10000 rpm.
Application Types
Milling
15M sorting line, picking line
Overall length 14.9m x 3.84m Wide
Checkered plate platform
Capvemh3
Chutes 700mm x 50mm
5 chutes LHS
7 Chutes RHS
access in floor for further drop chutes
1200mm wide conveyor flat picking line
sorting anlagenbau
sortieranlagen
Ref. -No.: 10024
Brand: FOREST LINE
Type of control: CNC
Control: Siemens Sinumerik 840 C
Storage location: Mülheim an der Ruhr
Country of origin: Frankreich
X-Travel: 2500 mm
Y-Travel: 2000 mm
Z-Travel: 1800 mm
Machine length: 13250 mm
Machine width: 9503 mm
Machine Height: 5229 mm
Spindle Diameter: Ø 150 mm
Table Dimensions (Lengthxwidth): 1250 x 1600 mm
Numbers Of Tools In Magazin: 130
Rapid Traverse X-Axis: 15 m / min
Rapid Travel Y-Axis: 15 m / min
Ojvrh
Rapid Traverse (W-Axis): 10 m / min...
pressure:600 t
distance between columns:3640 mm
stroke:350 mm
no. of strokes:11 - 44 /min
Distance table/ram, max. stroke up, adjustment up:1550 mm
table surface area:3600 x 2500 mm
sliding table:3600 x 2500 mm
ram surface:3600 x 2500 mm
Side window:2200 mm
Baiu3sjwai
ram adjustment:400 mm
material width coil line:500 - 1950 mm
Material thickness at 1200 mm material width:0,6 - 2,5 mm
Material thickness at 1850 mm material width:0,6 - 2,0 mm
Material thickness at 1950 mm material width:0,6 - 1,7...
Catalog No. : 2997
Type: FLP 2200
Producer: FOREST LINE
Made in: 1984GO1999
Fue3bam
Characteristic:
Length of the working table: 9300 mm
Width of the working table: 2200 mm
Speed: 0-1500 1/min
Total power demand: 120 kVA
Maximum workpiece weight: 18000 kg
Maximum workpiece dimensions: 9000x2500x1500 mm
Machine height: 5000 mm
Machine length: 21500 mm
Machine width: 8500 mm
Machine weight: 80 t
Equipment:
Technical books
CNC Milling head with vertical and horizontal axes
GO 1999
Pneumatic cylinder, compact cylinder
Ebfktvr
-bar SZD-32/ 50
-Hubweg 50 mm
-Piston rod Ø 12 mm
-Dimension 40/40/H165 mm
-Weight 0,5 kg
liter capacity 26 - 300 l
tank capacity 2590 l
high-pressure pump 5,50 kW
liter capacity 26,00 l/min
Pressure power 80,00 bar
supply water pump 4,00 kW
liter capacity 300 l/min
Pressure power 3,20 bar
siphon pump 1,10 kW
Gwabw8
liter capacity 330 l/min
Pressure power 0,80 bar
total power requirement 10,00 kW
weight of the machine ca. 2,00 t
dimensions of the machine ca. 3,00 x 1,50 x H2,20 m
Coolant unit for emulsion with filter TF361 and HYFRA TRK50 chiller
x-travel 6000 mm
y-travel 2600 mm
z-travel 1000 mm
distance between columns 2100 mm
Height of spindle 1200 mm
bed width 1600 mm
bed length 6000 mm
table load 3 t/m2
feeds infinitely variable 1-25000 mm/min
Rated capacity of drive motor 29 kW
Cross cut of slide 360x360 mm
Positioning increment 2.5 °
Turning speeds stepless 10-6000 U/min
Tool tapers ISO 50
tool piece magazine with 46 Werkzeuge
Dimensions (L/W/H) 10,5x mm
weight t
Bfqh03dptk
control NUM 1060
Spindeleinheit mit Doppelschwenkung...
Valve Line 2:
CPR 4-Cylinder Valve Line - consisting of: Stem seal and spring seat assembly machine, valve and spring insert machine, ball press machine and decade unit, retainer cotter load sub assembly machine, valve cycling and leak test, final inspection station this line has automation conveyor, pallet elevator and pallet conveyor (2006) current line layout:
1 Pallet Transfer
• Transfers pallets from lower return line to upper feed line
2 Pallet Hold:
• Manual part load onto pallet
Stem Sea...
Anodizing line
Bogqo8u2wj
RT Microline 2x1 m + KMT Neoline 3800bar Pumpe
Operating hours: 5000
Working range: 2000 x 1000 mm
Speed: 15 m / min
Working speed: 0.1-12000 mm / min
Bhfw8wdmi3
Positioning accuracy: 0.01 mm
Z axis with stroke: 200 mm
Equipment:
High pressure pump with CNC table
Remote Control
Installed programming software
Pump including cooling
Solenoid valve, directional valve, valve terminal, control valve
Bkv0bkpbne
-Manufacturer: bar, solenoid valve type NM-321-H
-Magnet coil: MA 22
-Price per piece
-Quantity: 3 St.
-Dimension: 135/72 / H22 mm
-Weight: 0.3kg / piece
1. Decoiler 7 ton
- max length: 1550mm
Cfsfn3j
- max dia
