Used Electrode Furnace for sale (1,194)

Condition: good (used), Year of construction: 2007, machine/vehicle number: 194354, Offer 26187 Technical data: - Nominal temperature / Continuous temperature, stepless, up to 900 °C Itodpfozw D H Hjx Ad Iol - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door, and floor - Motorized lift-up door - T. max. approx. 120 min - Drive: 400 V / 59 kW - Internal dimensions approx.: W 1000 x H 550 x D 1900 mm - Usable volume approx.: 950 L - Space required approx.: W 2100 x H 2800 x D 2800 mm - Weight approx.: 2900 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers Isdey Avmlepfx Ad Istl -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Iodpfx Ajy N Uxged Istl

Condition: used, Year of construction: 2003, machine/vehicle number: 3945, functionality: fully functional, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries Itjdjyn Rgvepfx Ad Ijl

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Itedsy Uuwmjpfx Ad Isl Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 95,000 mm, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Isdpfxjvcdr Do Ad Ietl

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Iedpfxoxz Divj Ad Ijtl

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02/112005FC170/SPEC, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We are selling a heating furnace (made for heating of manufacturing plants and warehouses) along with the metal chimney - both in very good and working condition. Still in operation. Available for self-disassembly and pickup in our production hall. Isdpfjx H Nudjx Ad Ietl

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Excellent Condition: Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Condition & Terms of Sale: Please note: The furnace is being sold strictly on an "AS IS, WHERE IS" basis directly from our warehouse. The furnace was professionally dismantled from a working cleanroom environment. All wiring and connections are carefully labeled for easy reassembly by the buyer. For full transparency: Two internal graphite heating elements were damaged during the dismantling process and will require replacement. Otherwise, the equipment is 100% complete and ready for immediate relocation. You are highly encouraged and welcome to physically inspect the equipment in our warehouse near Białystok, Poland, prior to purchase. ##### Equipment Overview: Furnace chamber made entirely of stainless steel, double-walled for water-cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and service. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Iodjzkwp Ispfx Ad Ietl Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required.

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Ijdpfx Aoztrbkjd Istl

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Iedpfx Aod Sm Disd Ietl

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet Iodpfx Aexurpwsd Istl PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Ijdpfxozhw Sds Ad Istl

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, Glass laminating oven with vacuum mat (bag oven), manufacturer SIMTECH (Belgium), Flexlam series – Glass Laminating Solutions. Manufacturer: SIMTECH (Belgium) Isdjzqmhaspfx Ad Istl Model: Flexlam Laminating Oven Electrical panel: Alfametal / Dynamics, Project No. 0467 Year of manufacture: December 2007 Power supply: 3 x 400V AC + PE, 50Hz Network: TN-S, Icc < 10kA Control panel: Allen-Bradley PanelView 300 Micro Controls: Cycle Start/Stop, Vacuum Start, Reset, Emergency Stop Vacuum system: Dedicated vacuum pump, vacuum mat/bag Signaling: Signal tower (End of Cycle / Alarm-Fault / In Process)

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W Itodpfxex Sw N Hs Ad Iel -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min Ijdoxpuahspfx Ad Iotl max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: good (used), Chamber volume: approx. 72 liters (usable volume) Heating capacity: 18 kW Internal dimensions (W x D x H): approx. 400 x 600 x 300 mm Temperature: 1,200 °C Itodpjzwfwajfx Ad Isl Controller: G 400

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Itedpfxjtndwue Ad Iol

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Complete aluminum ingot casting and stacking line manufactured in 2022 by GHI Smart Furnaces. Inclined casting machine for the production of 10 kg commercial aluminum ingots, with a nominal capacity of 5 t/h. The line includes an automatic pouring system, water spray cooling system, demolding system, cooling and ingot positioning conveyor belt, 3-axis stacking robot, and a walking beam hydraulic conveyor for package handling. • Application: casting and solidification of metal ingots • Status: available for immediate sale • Current condition: in operation The equipment has been operated under normal industrial conditions and has been maintained in accordance with the manufacturer's recommendations. Iodezbty Sepfx Ad Istl The machine is suitable for the production of aluminum ingots and can be integrated into existing melting and casting operations. Its robust design ensures reliable operation and consistent casting quality.

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Iedpfx Adoim Ik Ss Iotl Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 9349-0010, functionality: fully functional, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS Ijdpjw Rrxfsfx Ad Iotl

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 Ijdpezfyu Aofx Ad Ijtl - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal glass convection tempering furnace . For max. glass sizes : 1500 x 3000 mm Itodpfx Adoyw Hgro Iol Glass thikness : 4 - 19 mm Voltage : 400 V 50 Hz Control voltage : 230 V V AC 24 Power : Heating : 296 Kw Motors : 262 Kw Total : 558 Kw Current : Heating : 470 A Motors : 450 A Total : 920 A

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg Iodpezvfluefx Ad Iotl - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Max workpiece size: approx. 1200 × 1200 × 1200 mm Loaded for transport. Itedpjx Tcmyefx Ad Ijl