Used Fng 40 Cnc for sale (27,658)

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C Codpsx Hxkzsfx Ac Nerb - At a relative humidity of up to 90%, 500 W Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine Csdpfx Aewfdm Ejc Norb EPS cutting machine with 4 independent moving axes and variable machine table.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, IMA BIMA CUT Working range (axis travel) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) Cjdsyzc Nkjpfx Ac Norb Spindle • Spindle power: approx. 18 kW and 12 kW • Application: milling, drilling, board nesting, curvilinear edge banding Tool magazine • Automatic tool changer (ATC): up to 18 positions Material clamping system • Vacuum table with beams and suction cups—automatic repositioning 🛠️ Features and equipment (typical) • Drilling from 5 sides (top + sides X+/X−/Y+/Y−) • Saw aggregate for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Conveyor for waste and chips (belt)

Condition: as good as new (ex-display), Collet chuck SK 40, DIN 69871/OZ32 Collet type OZ32 467 E total length 190 mm parts are unused in opened original packing price per piece 12 pieces available weight per piece 2 kg Codpfx Aelrt S Nsc Njrb

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc Credpfjvry T Nsx Ac Njb pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, overall weight: 5,000 kg, We are offering this refurbished metal spinning machine UD320 CNC-Fanuc, fully overhauled in 2025. This is a metal spinning machine that has been completely refurbished by us and equipped with a new, modern Fanuc CNC control system. We currently own a total of 9 of these machines. Five of these machines have already undergone a retrofit with the Fanuc control unit. The overhaul of other components such as bearings, guides, and slideways is carried out either in-house or through external contractors. We are very familiar with these machines. The hydraulic unit has been custom-built to our specifications. Cedpeykmmkefx Ac Nerb If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Crjdpfoxl Rf Ssx Ac Nsb

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Cedpfoxl Rgiex Ac Nsrb

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm • Model: Marameter M • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability Cjdpfx Acexmlgtj Nerb • Comes with the original wooden case Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Condition: as good as new (ex-display), Number: AAL 130426 Length: 1,000 mm Storage diameter: 170 mm Cone intake: 46 to 64 mm diameter 70 mm length Speed: 8,000 U/min Condition: Unused Use: For large Chevalier grinding machine FSG 2460 CNC Cedjd Nlagopfx Ac Nsrb

Condition: new, Mori Seiki MV 40 E main spindle MV40SPU080ADA01 NEW GM4021244-009 from stock (traces of storage) Please refer to the pictures for further technical information Scope of delivery as shown Auction price is without 19% VAT and invoice The invoice will be enclosed with the shipment. The invoice will be enclosed with the shipment. Cj2Gdlmgos Credpeuxnwaefx Ac Neb Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. Payment method Paypal bank Pick up by yourself You will receive information about bank details, payment methods, etc. by email Request more information PROVIDER Schneider Technik CNC 74423 Obersontheim, Germany +49 7973 ... show Last online: Last week Registered since: 2018 16 ads online Please call me back Show more SEND INQUIRY EN I am a dealer Receive offers for similar machines Send inquiry Privacy policy TELEPHONE & FAX +49 7973 ... show +49 7973 ... show print view Share Manage advertisement edit

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter Cjdpowuq A Eefx Ac Nerb - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder - 1x VDI 40 plug Weight: 30kg

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Crsdotximvspfx Ac Njb Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Credeuu Ntgopfx Ac Nsb Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Cjdpfxowzvy Ns Ac Norb Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Cjdpfewzvxrjx Ac Nsrb Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: good (used), Cutting table for divided tape measures • Complete line available • Fully automatic float glass cutting table from Hegla, manufactured by Laser, was purchased by Hegla, and spare parts are available from Hegla. • The table can also cut shapes, particularly suitable for small dimensions. All data can be optimized and entered on the computer; the program is installed on the PC that is included. • Glass thicknesses from 2-15 mm • Maximum glass size 2250 x 3300 mm • Breaking table with breaker bars Crjdpot Iflrofx Ac Nsb

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts Crodpfx Asxizb Ejc Njb • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), 40 linear meters pallet racking Stow Used equipment, very good condition, see photos Height: 4 m Depth: 100 cm Beam length: 2.70 m Load capacity per level: 3,000 kg Frames: blue Beams: orange Negotiable price: €2,850,-- net ex stock Offer includes: + 14 pcs. pre-assembled frames, 12 t bay load, depth 100 cm, height 4 m Crjdpfxoiwlpfe Ac Neb + 52 pcs. beams, length 2.7 m, 3,000 kg load capacity per level + 108 pcs. safety clips + 56 pcs. concrete anchors Load capacity sign Goods are in stock. Transport and installation available on request. Inspection possible by appointment at any time. Further information available on request. More than 5,000 linear meters of pallet racking from various manufacturers always in stock. (Subject to changes and errors in technical data, descriptions, and prices, as well as prior sale! Please see our Terms and Conditions. All prices ex works, excluding VAT.) Purchase / Sale We are constantly looking for or offering numerous items from various fields: – broom-clean company clearances – business closures – Quick, flexible, and efficient! – We also clear out or dispose of items for insolvency administrators. Just send us a message with some key details, and we will get back to you promptly. To visit our site, please click on our logo!

Condition: like new (used), 40 linear meters Pallet Rack Nedcon New, see pictures! A top-quality racking system from the major manufacturer NEDCON – a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 5.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam capacity per level: 3050 kg Negotiable price: €6,990 net ex stock Offer includes: + 15 pre-assembled frames, depth 110 cm, height 5.5 m + 84 beams, length 2.7 m, load capacity 3050 kg per level + 168 lock-in safety clips + 30 concrete anchors Load capacity signage and documentation included as standard. Additional accessories available in the accessories catalogue. Frames blue RAL 5019, bracings galvanized. Heights from 2 m to 7 m in stock. Field load capacity up to 12 tons; higher field loads on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and installation available on request. Other configurations available on request. Over 2,000 meters in stock. Inspection possible by appointment at any time. Further information available on request. Constant stock of over 5,000 linear meters pallet racking from various manufacturers. (Subject to changes and errors in technical data, specifications, and prices. Intermediate sale reserved! See our terms and conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We are continuously searching for and offering many items from various sectors Crjdjfkgpwepfx Ac Njb – Broom-clean company clearances – Company liquidations – Fast – flexible – efficient! – We also clear and/or dispose for insolvency administrators. Send us a brief enquiry, and we will contact you promptly. To visit our website, please click on our logo!

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port Codpfx Acswlqpyo Nerb - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- The machine renovated and functionally checked ! Short summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Csdeuzaa Sspfx Ac Njrb Number of spindles: 6 1. Tool holder - below ----- Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin for table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Common motor with left tool holder Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 3. Tool holder - PowerLock - left ----- Motor with brake: Common motor with the 2nd spindle Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Radial CNC-controlled spindle 5. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max. : 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Spindle axially and radially CNC controlled 6. Tool holder - PowerLock - below ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Max throat depth: 15 mm Axial adjustment range: 35 mm Radial CNC-controlled spindle feed system ----- Frequency-controll...

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Credpfx Aoghrgusc Neb Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions Crodpfsxpqm Rjx Ac Njb 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Crsdpomnqbtjfx Ac Njb