Used Manual Lathe for sale (19,430)

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V Bcedpfx Abeydqpijdsw connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm Bcjdpfxox Hpyyj Abdow feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine is without live tooling and without tailstock.

Condition: used, Year of construction: 1990, turning diameter over bed 0520 mm turning diameter over slide rest 300 mm turning length 1625 mm spindle bore 68 mm spindle turning speed range 23- 1250 U/min total power requirement 7,5 kW weight of the machine ca. 3 t dimensions of the machine ca. 2,8 x 1 x 1,4 m Bcjdpeyn R Exsfx Abdjw With Multifix holder, chuck und chuck safety cover.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p Bedpfx Absyn Imyodjcw EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LU 3000 EX-M 2ST-600 Control: OSP-P300L Year of manufacture: 2017 Turning length: 600 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Spindle speed: 50 - 5,000 rpm Bcjdpfx Aeym Rp Isbdsw 2 turret units A turret: 12 tool stations (all driven) B turret: 8 tool stations Equipment / Accessories: Chip conveyor One Touch IGF Tool monitoring system Tool measuring device Reinforced coolant pump, 8 bar 3-jaw chuck Kitagawa B208

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Bjdpfxoymk E Ao Abdscw Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 570 mm, turning length: 2,000 mm, spindle bore: 62 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 3 rpm, workpiece weight (max.): 2,000 kg, Equipment: rotational speed infinitely variable, The VDF 560 DUS are the most popular teach-in lathes from VDF Boehringer in terms of turning diameter. With a standard chuck size of 315 mm or more, these machines offer optimal machining efficiency for the production of single parts and small series. This machine is currently on display in our showroom; an on-site inspection is possible! Scope of delivery: Includes drawer cabinet with various tools and Multifix holders. Specifications Manufacturer: VDF Boehringer Model: DUS 560 TI Year: 2005 Condition: Used Stock number: 00164 Maximum turning diameter: 570 mm Maximum turning length: 3000 mm Spindle bore: 62 mm Speed (min-max): 3 - 2500 rpm Spindle power: 19 kW Spindle mount: DIN 55 027 Gr. 8 Tool turret: Multifix Turret positions: 2 Tailstock taper: MK5 Bsdpfowv S Rtex Abdecw CNC control brand/type: Heidenhain Manual Plus 4110

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 230 mm, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, quill stroke: 120 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 3,000 rpm, Swing diameter over bed: 400 mm Swing diameter over cross slide: 230 mm Bcsdpfx Asyn Dqzobdow Distance between centers: 1,000 mm Spindle bore: 50 mm Speed: 1–3,000 rpm Quick-change toolpost Three-jaw chuck Tailstock Quill travel: 120 mm Various tools (without cabinet) Dimensions LxWxH: 2400 x 1450 x 1900 mm

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Bodpfxjynky Ae Abdocw Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: used, mileage: 757,970 km, power: 301 kW (409.25 HP), first registration: 06/2003, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 8x2, wheelbase: 6,400 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, total length: 10,010 mm, total width: 2,480 mm, Year of construction: 2003, Equipment: ABS, cruise control, electric window regulation, = Additional options and accessories = - 2-pedal control - Aluminium fuel tank - Heated exterior mirrors - Car kit - Speed limiter - Beacons - Sun visor = Further information = Technical information Number of cylinders: 6 Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Suspension: leaf suspension Rear axle 1: Max. axle load: 7,500 kg; Steered; Suspension: air suspension Rear axle 2: Dual tyres; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 3: Max. axle load: 7,500 kg; Steered; Suspension: air suspension Weights Unladen weight: 17,160 kg Bcodpfjycp N Ssx Abdjw Payload: 17,340 kg Gross vehicle weight: 34,500 kg Identification Registration number: BN-SV-57

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Bsdpfeyl Uh Ssx Abdscw Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: new, Year of construction: 2023, 660 x 2300 mm, 104 mm passage EVS Variable spindle speed Cooling Bcedsptabaepfx Abdow 2 pieces MT5 Center Standard machine tools Manual and spare parts list 3 claws 12" Sk type 2-axis digital display FAGOR Quick change chisel turret

Condition: good (used), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Ex-College machine Bedpfx Aeu Rd S Rjbdecw

Condition: used, Year of construction: 2010, IMT W20 T2 Vertical Lathe Bjdpfx Abowb Svgedocw Control: Fanuc 32i-Model A Turning Diameter: 542 mm Chuck: Schunk 500 160 Turning Length: 450 mm Maximum Swing Diameter: 640 mm Maximum Speed (rpm): 2500 Spindle Power: 29.5 HP X-Axis Travel: 450 mm Z-Axis Travel: 450 mm X-Axis Rapid Traverse: 15,000 mm/min Z-Axis Rapid Traverse: 15,000 mm/min Number of Turning Tools: 6

Condition: used, Year of construction: 2006, with C-axis with driven tools FANUC 18T-C control turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Upper turret holder with 12 positions, 6 of which are driven Bodpfxjr E Amge Abdjcw Tool presetter Chip conveyor

Condition: ready for operation (used), Jungheinrich Type: EJE 116 Year of manufacture: 2016 Lifting capacity: 1,600 kg Bcodpfx Ajynzxpsbdjw Lift height: 200 mm Fork dimensions: 1150 x 540 mm Including internal charger Battery condition: 80% Battery year: 2024 Are you only looking for a new battery for your machine? We can also supply these. Send us the nameplate and the battery dimensions, and we will provide you with a non-binding offer. At FLITS Rental & Sales, you will find a wide range of machines suitable for use in various sectors. Please also check our advertisements for: waste compactors for efficient waste disposal, electric pallet trucks/stackers for fast and safe internal transport, scrubber machines for thorough and professional floor cleaning, and forklifts in various models suitable for a wide range of work environments. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure that you quickly have the right machine at your disposal. You are very welcome to view the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to provide you with all the information you need and show you the right machines. Do you have any questions or would you like to receive a non-binding quotation? Please feel free to contact us. We are happy to assist you!

Condition: good (used), mileage: 312,119 km, power: 191 kW (259.69 HP), first registration: 12/2002, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 600 l, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 9,360 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 7,150 mm, loading space width: 2,510 mm, loading space height: 2,520 mm, Year of construction: 2002, Equipment: tail-lift, Technical Information Number of cylinders: 6 Engine displacement: 9,364 cc Maximum front axle load: 7,100 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 9,830 kg Payload: 10,170 kg Gross vehicle weight (GVW): 20,000 kg Functional Tail lift: DHollandia, 2,000 kg Condition Technical condition: good Identification Bcsdpfxsynwnye Abdjw Registration number: 67-BFN-7 Further Information Please contact Vitali Lenda for more information.

Condition: good (used), mileage: 921,286 km, power: 368 kW (500.34 HP), first registration: 09/2006, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 600 l, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, total length: 6,400 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2006, = Additional options and accessories = - Tipping hydraulics - PTO = Further information = Technical information Number of cylinders: 8 Bodpfxjynwl Es Abdecw Engine displacement: 15,607 cc Transmission Gearbox: GR, manual transmission Axle configuration Maximum front axle load: 7,500 kg Rear axle 1: lifting axle; max. axle load: 7,500 kg Rear axle 2: max. axle load: 11,500 kg Weights Unladen weight: 9,105 kg Payload: 17,395 kg Gross vehicle weight: 26,500 kg Functional Body manufacturer: Scania Condition Technical condition: good Identification Registration number: BS-DV-11 Further information Please contact Vitali Lenda for more information.

Condition: good (used), mileage: 581,000 km, power: 304 kW (413.32 HP), first registration: 03/1999, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 8,400 mm, total width: 2,500 mm, total height: 3,050 mm, Year of construction: 1999, Equipment: differential lock, power assisted steering, = Additional Options and Accessories = - Leaf suspension - Air horn - Radio/CD player - Sun visor - Power take-off (PTO) - Central lubrication = Further Information = Technical Specifications Number of cylinders: 6 Gross vehicle weight: 41,000 kg Bcjdeyntqdepfx Abdjw Axle Configuration Suspension: Leaf suspension Front axle 1: Steering; tyre tread left: 40%; tyre tread right: 40% Front axle 2: Steering; tyre tread left: 40%; tyre tread right: 40% Rear axle 1: Twin tyres; differential lock; tyre tread left inner: 40%; tyre tread left outer: 40%; tyre tread right inner: 40%; tyre tread right outer: 40%; reduction: external planetary axles Rear axle 2: Twin tyres; differential lock; tyre tread left inner: 40%; tyre tread left outer: 40%; tyre tread right inner: 40%; tyre tread right outer: 40%; reduction: external planetary axles Condition Technical condition: good Visual condition: good Further Information Please contact Andre, Henri or Andre for more details.

Condition: good (used), mileage: 680,000 km, power: 410 kW (557.44 HP), first registration: 04/2001, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2001, Equipment: ABS, air conditioning, differential lock, electric window regulation, retarder, = Additional Options and Accessories = - Leaf suspension - Intarder - Power take-off (PTO) - Central lubrication system = Notes = Rear tipper = Further Information = Technical data Number of cylinders: 6 gross vehicle weight (GVW): 32,000 kg Axle configuration Front axle 1: Steered; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Leaf suspension Front axle 2: Steered; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Leaf suspension Rear axle 1: Twin tyres; Differential lock; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Bjdpoyntp Tefx Abdecw Rear axle 2: Twin tyres; Differential lock; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Suspension: Leaf suspension Functional Tipper: Rear Condition Technical condition: good Visual condition: good Further information For more information, please contact Andre, Henri, or Andre.

Condition: used, Year of construction: 2022, turning diameter 276 mm turning length 500 mm control Mazatrol Smooth G max. swing diameter over bed 695 mm Distance spindle end - turret 710 mm bar material dia. max. 65 mm turning speed range - spindle 35 - 5000 U/min max. torque on the spindle 465 Nm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min spindle nose A2-6 spindle passage 76 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW tailstock quill taper MT 5 Travel- tailstock 550 mm Tool turret 1 Numbers of tools 12 (angetrieben) tool taper VDI 30 min rated capacity 42,6 kVA Required air-pressure 0,5 / 330 MPa / l/min distance spindle /table 710 mm total power requirement 37 kW weight of the machine ca. 5,7 t dimensions of the machine ca. 2,8 x 2 x 1,9 m With the following special accessories: - Mayfran chip conveyor, side ejector, hinged belt conveyor - Engraving function ACCESSORIES / MACHINE OPTIONS Automatic on/off switch and warm-up function A warm-up is necessary to avoid problems such as abnormal wear of the sliding surfaces and sluggish movement. A sufficient warm-up provides the machine with the heat resistance it needs to machine workpieces with consistent, high precision. Transformer for the European market 8" chuck for main spindle with enlarged passage USB connection (1 connection) Mazak standard colour Main spindle motor AC 26 kW Tool turret with 12 stations VDI, also for driven tools in every position. For maximum performance, only the cutting tool is driven. Programmable tailstock (MK5) Tailstock quill (MK5) Y-axis control SAFETY DEVICES Bcjdpfxsynbd So Abdjw Operator door with lock switch Double foot switch Opening and closing of the chuck by means of a separate switch. Hydraulic pressure lock Fully enclosed work area Work area lighting COOLANT SUPPLY High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system CHUCK, ETC. Automatic opening/closing of chuck jaws 8" power chuck with enlarged passage (main spindle) Kitagawa BB208 MEASURING SYSTEM Automatic Tool Eye NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (shared variables: 600 pairs) Mazak tapping/drilling cycle Tornado in EIA/ISO. (Only possible on machines with Y-axis. EIA/ISO package EIA/ISO input function EIA/ISO additional functions - Helical interpolation - 3D tool correction - Workpiece coordinate rotation - Geometric function - Scaling - External data input/output Thread cutting function (G33) Reverse time feed G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop (optional stop) Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak thread tapping/drilling cycle Tornado in EIA/ISO. EIA/ISO drilling cycles (arc, grid, circle, circular arc, line) Machining on inclined surfaces EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Interface for LAN SD memory card I/F Smooth standard software for lathes (milling) MAZACC 2D software Workpiece shape compensation Rapid traverse paths Rounding function - Seamless co...

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bcedpfxjynbd Ej Abdsw Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 Bodpfx Abjwm D Iljdscw - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2010, swing diameter 1600 mm faceplate diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Table rpm 450 1/min speeds c-axis 0,004-5 1/min. Bcedpjxylm Tefx Abdew feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools -Various clamping devices -Coolant device with filter -Chip conveyor -Documentation

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm - max. magazine load 1000 kg Bcsdpfxovylils Abdjw Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm - Various drilling and milling heads - Various turning tool holders - 2x measuring probes