Used Manual Lathe for sale (18,368)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1310370, turning length: 240 mm, turning diameter: 180 mm, spindle speed (max.): 6,000 rpm, bar diameter (max.): 35 mm, controller model: FANUC SERIES oi-TD, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the designated periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. turning diameter: 180 mm Max. turning length: 240 mm Chuck size: 6 inch Max. swing over bed: 320 mm Max. bar capacity: 26/35 mm Spindle bearing diameter: 75 mm Max. spindle speed: 6,000 rpm X-axis travel: 120 mm Z-axis travel: 280 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 18 m/min MACHINE DETAILS CNC control: FANUC SERIES oi-TD Operating voltage: 200 V Frequency: 50/60 Hz Connection: 23 kVA Dimensions & weight Dimensions (L x W x H): 1,500 x 1,500 x 2,200 mm Hnsdpeym Ab Njfx Aacsk Weight: 2,000 kg EQUIPMENT 12-position turret External reference: Elos - Lot 7

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 160378, spindle bore: 40 mm, center height: 160 mm, center width: 750 mm, spindle speed (max.): 3,000 rpm, workpiece diameter (max.): 375 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified timeframes: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Centre height: 160 mm Centre distance: 750 mm Hnodpfxoym Nkks Aacsk Maximum workpiece diameter over bed: 375 mm Maximum workpiece diameter over cross slide: 180 mm Spindle speeds: 38 to 3,000 rpm Spindle taper: Morse 5 Spindle bore: 40 mm Collet capacity: 24 mm Fine feeds longitudinal and cross: 0.015 to 0.21 mm/rev Longitudinal and cross feeds: 0.025 to 0.35 mm/rev Cross slide travel on bed: 750 mm Compound slide travel: 120 mm Cross slide travel: 215 mm Centre height above tool slide: 32 mm Tool section: 20 x 20 mm Tailstock quill taper: Morse 3 Quill travel: 120 mm Lateral adjustment: +/- 10 mm MACHINE DETAILS Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,000 x 1,500 mm Weight: 2,500 kg EQUIPMENT Including documentation Matching tool cabinet with accessories included External reference: Showroom

Condition: ready for operation (used), Year of construction: 2010, operating hours: 64,297 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item punctually, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Turning length: 350 mm Turning diameter: 114 mm Spindle speed (max): 8,000 rpm Bar capacity: 25.4 mm Centre distance: 445 mm Spindle distance: 485 mm Travel X-axis: 100 mm Travel Z-axis: 320 mm Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 30 m/min Torque: 30 Nm Swing diameter over cross slide: 325 mm Hnedoyn Nuxspfx Aacek MACHINE DETAILS Control: FANUC SERIES 18i-TB Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,100 mm Total weight: 2,500 kg Control manufacturer: FANUC Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 26 A Operating hours (according to display): 64,297 h EQUIPMENT Tailstock Main spindle Tool turret (12 positions) Driven tools (6 pieces) Y-axis

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10071775, center height: 150 mm, overall weight: 100 kg, rotational speed (max.): 3,300 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Speed: from 400 to 3,300 rpm Hedpfx Aaoyn Hz Neconk Distance between centers: approx. 400 mm Center height: approx. 150 mm MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Rated current: 2.5 A Connected load: 0.56 kW Dimensions & Weight Dimensions (L x W x H): 850 x 300 x 440 mm Weight: 100 kg External reference: Training workshop – Lot 3

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, turning diameter: 240 mm, center height: 110 mm, spindle speed (max.): 3,000 rpm, machine/vehicle number: 219278, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 220 mm Swing diameter over cross slide: 140 mm Centre height over cross slide: 70 mm Centre height over bed: 110 mm Centre distance: 350 mm Hsdpfoym Rrisx Aacsnk Spindle bore: 22 mm Spindle speed: 270–3,000 rpm MACHINE DETAILS Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,600 mm Weight: 500 kg EQUIPMENT Tailstock Multifix quick-change toolpost Quick-action chuck Collets Additional suitable accessories External reference: Lot 16 / Ulmer

Condition: ready for operation (used), functionality: fully functional, turning diameter: 300 mm, center height: 150 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,030 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified period: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: approx. 300 mm Swing diameter over cross slide: 200 mm Centre height over cross slide: 100 mm Centre height over bed: 150 mm Centre distance: 750 mm Spindle bore: approx. 35 mm Spindle speed: 40 – 2,800 rpm MACHINE DETAILS Operating voltage: 380 V Connected load: 3 kW Rated current: 25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,860 x 700 x 1,800 mm Weight: 1,030 kg Hnodpfx Aoym N Aajacjk EQUIPMENT Tailstock Multifix Type B toolholder 3-jaw chuck (diameter: 160 mm) 2-axis digital readout by RSF External reference: Mahle

Condition: ready for operation (used), functionality: fully functional, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,800 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 340 mm Center height over support: 100 mm Swing diameter over support: approx. 200 mm Distance between centers: 750 mm Center height over bed: 170 mm Spindle speed: 12 – 2,800 rpm Spindle bore: approx. 38 mm MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Connected load: 3 kW Rated current: 6.25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,700 x 650 x 1,500 mm Weight: 800 kg Hnodpfxsym Nz No Aacjk EQUIPMENT Tailstock Multifix tool holder RÖHM three-jaw chuck (Ø 160 mm) External Reference: Mahle

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, controller model: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840), turning length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obliges you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Turning length: 300 mm Centre height over bed: 100 mm Travel X-axis: 100 mm Travel Z-axis: 200 mm MACHINE DETAILS Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A EQUIPMENT Tailstock Three-jaw chuck Special turret Mobile workbench Hjdpfxjymz T Ds Aacjnk Matching accessories Note: An identical machine of the same design will be delivered; not exactly the one shown in the photos.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,200 h, functionality: fully functional, turning length: 640 mm, turning diameter: 460 mm, travel distance X-axis: 305 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 640 mm, controller model: Fanuc 32iPlus, TECHNICAL DETAILS Turning length: 640 mm Turning diameter: 460 mm Travel X-axis: 305 mm Travel Y-axis: 120 mm Travel Z-axis: 640 mm Hjdpfxjyx U R Uo Aacjnk Spindle bore: 82 mm Max. spindle speed: 3,500 rpm Spindle motor power: 25 kW Chuck size: A2-8 C-axis: 0.001° Sub-spindle Spindle motor power: 14/8 kW Spindle speed: 4,500 rpm C-axis: 0.001° Turret Number of tools: 12 Driven tool stations: 12 Milling motor power: 12 kW Spindle speed: 4,000 rpm MACHINE DETAILS Control: Fanuc 32iPlus Dimensions & Weight Dimensions (L x W x H): 2,803 x 2,020 x 2,236 mm Weight: 7,800 kg Spindle hours: 2,200 h EQUIPMENT Sub-spindle 12-station driven turret Tool length measurement Chip conveyor High-pressure pump 6 bar Parts catcher Set of driven and static tool holders

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Hodpfjyzxp Tjx Aaconk Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: F21172Y03323, Year of construction: 2021, operating hours: 3,237 h, load capacity: 1,200 kg, lifting height: 4,386 mm, free lift: 1,000 mm, mast type: triplex, construction height: 1,940 mm, DGUV certified until: 12/2026, Equipment: UVV, Service + UVV Inspection 12/2026 Initial Lift Triplex 438 cm Pedestrian Pallet Stacker, 3,237 hours No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated capacity: 1,200 kg Lift height: 4,386 mm Fork length: 1,200 mm Free lift: 1,000 mm Design: High-lift pallet truck MACHINE DETAILS Operating hours: 3,237 h Mast type: Triplex Drive type: Electric Battery: 14/07/2021, 24 V, 3 PzS, 225 Ah, measured with 25.3 volts (very good performance!) Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 1,940 mm Weight: 1,100 kg FEATURES Former Linde Full-Service unit Hedjyzf Tfspfx Aacenk Triplex mast with full free lift Integrated charger Initial lift Can lift 2 pallets at once Good ground clearance for uneven floors All dimensions are approximate. No liability is assumed for typing or measurement errors. COLLECTION CONDITIONS Side-loading up to 5 t possible with large forklift on site at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If collection is not made within the agreed timeframe, a storage fee of €20 per machine per day will be charged (the extra payment must be made before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: W41173J06378, Year of construction: 2018, operating hours: 3,372 h, load capacity: 1,400 kg, lifting height: 4,144 mm, free lift: 150 mm, mast type: duplex, construction height: 2,640 mm, DGUV certified until: 02/2027, Equipment: UVV, S+UVV 02/2027 1,400kg LI-ION Lithium Scale 414cm High-Lift Pallet Truck Pallet Truck Ameise Battery 02/2023 No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 4,144 mm Fork length: 1,200 mm Free lift: 150 mm Design: High-lift pallet truck Hjdpfxsyzf N To Aacjnk MACHINE DETAILS Operating hours: 3,372 Mast type: Duplex Drive type: Electric Battery: 26/03/2023, 23.1V, 205Ah, measured at 23.09V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 2,100 x 800 x 2,640 mm Weight: 1,500 kg EQUIPMENT Former Linde full-service machine Integrated scale All dimensions are rounded values. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site, at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am - 4:30 pm. Mast can be dismantled for transport upon request if too high. In case of late collection, a storage fee of €20 per machine per day applies (the additional payment must be made before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: P21173Y05406, Year of construction: 2021, operating hours: 3,356 h, load capacity: 1,400 kg, lifting height: 2,324 mm, free lift: 150 mm, mast type: duplex, construction height: 2,100 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + Safety Inspection (UVV) until 03/2027, 1,400 kg Scale Pallet Stacker / High-Lift Pallet Truck / Electric Pedestrian Stacker No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 2,324 mm Fork length: 1,200 mm Free lift: 150 mm Design: High-lift pallet truck / stacker MACHINE DETAILS Operating hours: 3,356 h Mast type: Duplex Drive type: Electric Battery: 24V, measured at 25.1V (excellent performance!) Dimensions & Weight Dimensions (L x W x H): 2,100 x 800 x 2,100 mm Weight: 1,300 kg FEATURES Former Linde full-service unit Initial lift Capable of lifting 2 pallets simultaneously Good ground clearance for rough or uneven floors Hjdpfxeyzf Ntj Aaconk Integrated scale All measurements are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift truck available on site, at buyer’s own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am - 4:30 pm. A mast that is too high for transport can be dismantled on request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will apply (payable before collection).

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 71 mm, turning diameter: 710 mm, turning diameter over bed slide: 710 mm, turning diameter over top slide: 420 mm, turning length: 3,000 mm, Model: SN 71 B Serial No: 071300780049 Swing Over Bed: 710mm Hsdjy Duc Ispfx Aacjnk Swing Over Top Slide: 420mm Swing In Gap: 960 x 300mm Spindle Speeds: 10-1000 RPM Spindle Bore: 71mm Motor: 7.5 KW Machine With: 625mm 4 Jaw Chuck Fixed Steady Quick Change Toolpost Dimensions: 5000 x 1500 x 1750mm Weight: 3250 Kgs

Condition: ready for operation (used), Year of construction: 2014, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle bore: 104 mm, spindle speed (max.): 2,000 rpm, Model: Alpha 1550 XS Year: 2014 Control: FANUC Oi-TD Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Hedpey Dubwsfx Aacsnk Machine with: 3 - jaw chuck 4 - jaw chuck Fixed Steady Quick Change Toolpost

Condition: used, YOM 2013 Chuck Size – 150mm Bar Capacity – 53mm Swing – 430mm Spindle Speed - 4,000 RPM Hodpfx Aajy Dtuiocjnk Control - Siemens 802D Distance Between Centers – 1000mm X-Axis Travel – 220mm Z-Axis Travel – 1065mm Swing Over Cross Slide – 200mm Motor – 10 HP 4-Way Tool Post Tailstock Over Dimensions (Approx.) 2.75m x 1.3m Weight (Est.) 2800kgs

Condition: used, 4 Axis Hnedey Drunopfx Aacjk Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: excellent (used), Year of construction: 2008, operating hours: 9,626 h, functionality: fully functional, spindle bore: 55 mm, turning diameter: 410 mm, turning diameter over bed slide: 246 mm, turning length: 1,250 mm, Colchester MultiTurn 2000 CNC Lathe Model: MultiTurn 2000 Control: FANUC Oi-TC Year: 2008 Hjdpfx Aoyxq Dqjacenk Swing over Bed: 410mm Swing in Gap: 600mm Swing over cross slide: 246mm Distance Between Centres: 1250mm Spindle Speeds: 15 – 2700 RPM Spindle Bore: 55mm dia. Motor: 7.5 kw Machine with: 250mm 3-jaw chuck 8 station auto indexing turret VDI30 Tool Holders Auto Lubrication Sliding Guards Coolant Work Light Dimensions: 2900 x 1700 x 1500mm high Weight: 2200 kgs

Condition: good (used), Year of construction: 2015, 460mm max machining diameter, 760mm swing, 12 Station Turret, Fanuc 32i Model B Control, spindle motor power 22/15kW, Hnedpfx Ajyzz Hbjacek 66mm diameter bar capacity, 4,000rpm spindle speed 3 jaw chuck, swarf conveyor, coolant,

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Hsdpfx Asy Akdleaconk Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Machine is in excellent used condition Videos can be sent on request

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg. Hedpfx Aasyw Tkwjconk

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Hnedswnfzcspfx Aacsk

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, 510mm cutting length, Hsdpfx Asyyaq Njaconk Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor,

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, turning diameter: 433 mm, turning diameter over bed slide: 433 mm, turning diameter over top slide: 267 mm, turning length: 1,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 20 rpm, Turning diameter in gap: 711 mm, Colchester Mascot 1600 Gap Bed Lathe Model: Mascot 1600 Hodpsyt Nfhsfx Aacjnk Swing Over Bed: 433mm Swing Over Top Slide: 267mm Swing in Gap: 711mm Distance Between Centres : 1000mm Spindle Speeds: 20-1600 RPM Spindle Bore: 76mm Machine with: 3 – jaw chuck Ainjest Threading Attachment Fixed Steady Quick Change Toolpost with holders Digital Readout High Speed Threading

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, Heavy Duty Elevating Crossrail Ram Type CNC Vertical Boring and Turning Machine with Hardened & Ground Box Guideways CAPACITY Maximum Turning Diameter - Ø 1,600mm Maximum Turning Height - 1,400mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,250 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220mm² TRAVEL AND FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,060mm Z-Axis Travel (Ram Vertical) - 900mm Vertical Travel of Cross Rail - 700mm Maximum X / Z-Axis Cutting Feedrate - 7,500mm / Min X / Z-Axis Rapid Feedrate - 7,500mm / Min Cross Rail Rapid Traverse - 300mm / Min ATC Type of Tool Holder - MAS BT 50 12 Tool Magazine Capacity Maximum Tool weight - 50kg MOTOR Table Motor (Cont. / 30 min) - AC 37.0 / 45.0 kW X / Z-Axis Servo Motor AC - 7.0 kW Hnedpfxsuu Rybo Aacjk POWER SOURCE Input Power Supply - 415V / 50Hz / 3PH Power Capacity - 80 kVA DIMENSIONS AND WEIGHT Height - 5,290 mm External Width (With Chip Conveyor) - 6,760mm External Depth - 4,565m Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES Fanuc 32i-A Control System Table, Servo Drives And Motors 4 Jaw Independent Chuck Automatic Tool Change System Lubrication Oil Cooler Hydraulic Power Unit Automatic Lubrication System For Guides Coolant System And Wash Gun Foundation Bolts And Nuts Tool Box Through Tool Coolant Operator And Programmer Manuals Splash Guard And Safety Guard Rail X-Axis Slideway Protect Steel Cover Work Light Patrol Lamp (Red, Yellow And Green) NC Power Off Chip Pan Levelling Blocks Electrical And Mechanical Manuals FANUC 32I CNC