Condition: excellent (used), Year of construction: 2017, Ref:11048 . 2017 Watkiss Auto SpineMaster Gives stitch-fold booklets superior quality and appearance of a square back finish. Features: • SpineMaster SquareBack booklets are the preferred choice of print buyers due to their professional appearance. • Booklets can be opened flat without damaging the spine. • Flat booklets are easy to handle, stack and pack, move and store. • Overall bulk is reduced by at least one third. • The SquareBack spine can be printed on, just like a perfect bound book Knjdsx Nfrwopfx Ah Uef Specification: Up to: 1,750per hour (single pass) Up to: 1,150per hour (double pass*) *double pass mode may be used for thick books, with stiff covers; the book is automatically processed twice for optimum results. Booklet Size: From 80 x 120mm to 250 x 350mm (dependant on specification of connected equipment) Booklet Thickness: Min. 1mm / Max. 6.5mm (equivalent to approximately 30 Sheets of 80gsm bond made into 120 page booklet or equivalent)

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Knsdpfex Ifk Dex Ah Ujf Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Knsdpfxjx D Dzqs Ah Usf Milling

Condition: like new (used), Year of construction: 2022, 2022 CUMMINS DIESEL ENGINE MODEL QSL9-G5 with Power Command Digital Control Knodpfx Aox H Tlmoh Uef S/No. 22F84536258. (2022). Supplied in 2022 this unit has never been run and remains as New.

Condition: excellent (used), Year of construction: 2001, Ref:11046 . 2001 JBI James Burn BB/43H Wire-O Closing Unit Double wire booklet binder Equipped with: Hand feed area with foot operated control Auto closing unit with 2 x closing tools Fully enclosed Perspex guarding Hand feed & delivery table Specification: Product size, Max: 430 x 610 mm Kodpfxex Nfp Nj Ah Uonf

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Knedpfxsx Ifiys Ah Ujf

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling Kodpfx Ahsx D Dzwo Uenf

Condition: good (used), Year of construction: 2005, Daewoo Puma TT 2000SY Twin Turret Turning Centre with Fanuc 18i-TB CNC Control Knsdpfx Asx H Thbsh Uof With Hydrafeed Multifeed MX-1B Short Magazine Automatic Bar Feed. Swing Over Bed 800mm. Swing Over Saddle 620mm. Max Turning on Upper Turret Ø390mm. Max Turning on Lower Turret Ø300mm. Max Working Length 350mm. Max Bar Ø65mm. 'X1' Axis Travel 255mm, 'X2' Axis Travel 190mm. 'Z1' Axis Travel 800mm, 'Z2' Axis Travel 900mm. 'Y' Axis Travel 120mm (+ or - 60mm). 'B' Axis 810mm. 'C' Axis 360°. (1) Kitagawa BB08 Power Chuck Ø210. (1) CRS66 Power Collet Chuck, Gripping Range 4mm-66mm. Main Spindle Nose A2 No.6 with Ø76mm Through Hole & Ø66mm Bore of Draw Tube & Max Speed of 5,000RPM. Twin Turret each with (12) Tool Stations. Tool Size 25mm x 25mm, Boring Bar Size Ø40mm & Spindle Speeds 4,000RPM. LNS Turbo 62878680E Swarf Conveyor (2005). Puma S/No. PT 20SY0047. Hydrafeed Multifeed MX-1B Automatic Bar Feed. Approx Ø3 - Ø80mm x 1,250mm Long Bar Range with Hydrafeed Controller, S/No. 202618. Includes Probe Arm, Signal Tower, (2) Machine Lights & (2) KF-101P Foot Switches. Dimensions of Turning Centre Approx 4,100mm x 2,300mm x 2,600mm High, Weight Approx 11,600kg. Please note: Filtermist FX 4000 XCEL 2 Oil Mist Filter Extraction is not included with the machine.

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Kodpfx Ahox Nfp Ao Uenf Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Ksdpfx Ahox D H T Aj Ujnf Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Knedpfx Ajx H Tbboh Uof Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included.

Condition: excellent (used), Year of construction: 2007, Ref:11044 . 2007 Renz Autopunch AP 360 Off line machine for spiral wire punching Kjdpfjx Nfppex Ah Usnf Equipped with: Punch sizes: 3:1" round & square hole + thumb cut / 2:1 round hole Jogger delivery Max. format: 360 x 360 x 2.5 mm

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Knodpfx Aox D E Raeh Uef Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1996, Harrison Alpha 550 CNC Straight Bed Lathe Kodpfx Ahox H S Uyj Ujnf Approx Ø550mm Swing Over Bed. Distance Between Centres Approx 2,000mm. Turning Speeds 15-1,800 RPM. Ø90mm Spindle Bore. (1) Ø300mm - 3 Jaw Chuck. (1) T3 Dickson Quick Change Toolpost. Manual Tailstock, 5 Morse Taper. (1) YP-150 Coolant Pump (1998). S/No. A50029. Note: Only Plastic Materials Have Been Cut On This Machine. This Lot Includes (3) Assorted Toolholder Blocks. Dimensions Of Machine Approx 3,100mm x 1,550mm x 1,700mm High. Power Input 415 Volt, 3-Phase, 11kW.

Condition: excellent (used), Year of construction: 2009, Ref:11043 . 2009 Horizon HT-30 Trimmer Excellent condition - Only 2.2m cuts! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising; HT-30 Trimmer with stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including A & B top plates, spare knives & tools. Specification: Book Size, Max: 300 x 300 mm Kjdsx Nfnlspfx Ah Usnf Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Kodpfxex D Dz Ds Ah Uonf This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: good (used), AXYZ Series 4008 CNC Router Kjdpfx Ahsx H S Ugs Usnf Single Head. Hand CNC Controller. Capacity Approx 1,525mm (60") x 2,438mm (96") With Approx Maximum 150mm Adjustable Clearance. 'T' Slotted Table Size Approx 1,500mm x 3,000mm with (10) 'T' Slots. HSD 'ES 919A 2P 08.00kW' Variable Speed Air Cooled Spindle, 24,000 Maximum RPM, 19kW, 25.5Hp Peak Power. AXYZ '7G' 7-Station ISO 30 Automatic Tool Changer with Vexta 'PK 299' 2-Phase Stepping Motor. Vacuum & Pressure Limited 'VP1-530' 4.6kW Vacuum Pump. Please Note: There Is No Software With This Machine. Dimensions Of Machine Approx 3,000mm x 2,200mm x 1,600mm High (Including Bed Height Of 900mm & Bridge Height Of Approx 700mm). Please Note: There Are No Toolholders Included In This Sale.

Condition: excellent (used), Year of construction: 2009, Ref:11042 . 2009 Horizon BQ-270 Excellent condition - Only 409,000 books produced! Single clamp solo binder designed for operation by one person. With auto calliper for automatic size setting Comprising: Touch-screen auto setting of thickness and cover scoring. Hand feed station Milling & roughing unit with dust bag Hot-melt spine glue unit with side gluing discs Automatic cover feeder with pressing unit Chute delivery unit Including tools, manuals and accessories Accessories: Auto calliper for automatic size setting Specification: Knjdpfx Aox Nfmhsh Usf Book size, Max: 660 x 320mm Min: 240 x 135mm Cover size, Max: 320 x 310 mm Min: 135 x 115 mm Thickness, Max: 50mm Min: 1mm Max speed : 500 cycles/hr.

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Knedpfjx D H Hisx Ah Uof Application Types Milling

Condition: like new (used), GMT GLOBAL SHRINK FIT EQUIPMENT & TROLLEY Kodpfx Aex H S Iyoh Uonf Ex demo' absolutely as new. Only been used at exhibitions and demonstrations. GIS-6 Induction Coil Shrink Fit Machine single Phase 230v 27A 6KW together with GCS-1 Cooling Unit. 30 40 50 ISO and HSK63A. Includes Vertex Tool Trolley and extras.

Condition: excellent (used), Year of construction: 2016, Ref: 11041 . 2016 Horizon Stitchliner 5500-S. Excellent condition - Only 1.6m on the counter! Fully automatic setting Saddle Stitched Booklet System. Features: • 10.4” icon-based 200 job memory colour touchscreen • Simple, fast set-ups by non-specialist finishing operators • Advanced all-system automation • Make-ready in seconds, next-to-no-waste, on-demand working • Works from flat-sheet 4-page sections • No need to pre-fold • Integrated automatic set-up 3-knife trimmer • No need to pre-trim • Score, plough fold, registration and genuine saddlestitch Kodpfox Nflwox Ah Uonf • High quality books with sharp spine definition • High efficiency from runs-of-one Comprising: CF-400 feeder with touch-screen control ST-40 Stacker /bypass to; ACF-40 Accumulator/Folder with double gate-fold to; SPF-30S Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-30S Three knife trimmer unit with hand-feed station TB-30 extraction system LC-20 Long belt delivery Specification: Max sheet size: 350W x 500L mm Min sheet size: 148 x 210 mm Max stitch thickness: 6 mm. Production speed up to 6,000 booklets per hour, dependent on stock

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Kedpfxox D Dz Ro Ah Uenf Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Agie Charmilles SP3 EDM Die Sink Machine Kjdpfx Ahex H Rxks Usnf S/No. MON30 NR-001014. With Filtermist. Rolls-Royce Approved Contractor (PIC) will need to remove item. Please contact PIC for a quote, contact details can be found in the Essential Information section. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Rolls-Royce Approved Contractor (PIC) will need to remove item. Please contact PIC for a quote, contact details can be found in the Essential Information section.

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Knsdjx D Nglepfx Ah Uof Application Types Pressing / Laminating

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm Kjdjx D H Uaopfx Ah Uenf This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Application Types Milling