Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Cehx Dnswcqa Hek Tsgt Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797256+797257+797255+797259, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Four robots will be auctioned together (built in 2013; operating hours 8,680/9,424/9,626/10,458 h; serial numbers 797256/797257/797255/797259) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Cshxewc Ucfj Dnk Tegt Noise level: < 75 dB Transformer: included Controller: included

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 12 mm, working length: 4,100 mm, TECHNICAL DETAILS Sheet length: 4,100 mm Sheet thickness: 12 mm Backgauge: 1,000 mm Sidegauge: 1,500 mm with scale, T-slot, and tilting cam Sheet support arms: 2 x 1,000 mm, with T-slot Total power requirement: 30 kW Control and drive Control: ELGO (for backgauge) Backgauge drive: Motorized, on recirculating ball screws, foldable Knives Lower blade: 4-way reversible Upper blade: 2-way reversible MACHINE DETAILS Dimensions (L × W × H): 5,350 × 2,250 × 2,250 mm Weight: approx. 16,300 kg EQUIPMENT - Swing-cut design - Clearly arranged control panel mounted on a swivel arm - Adjustable cutting length for efficient processing Cohowcqzkox Dnk Tegt - Hydraulic hold-down devices positioned close to the cutting edge - Foot switch - Central manual cutting gap adjustment - Easy blade replacement and resharpening - Operating instructions in German

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: BVE6895, Year of construction: 2013, operating hours: 4,799 h, load capacity: 2,500 kg, lifting height: 3,300 mm, load center: 350 mm, fuel type: electric, mast type: standard, TECHNICAL DETAILS Lift capacity: 2,500 kg Load center: 350 mm Mast and forks Mast type: Standard Fork dimensions: 125 x 40 x 600 mm Mast height: 2,240 mm Lift height: 3,300 mm Platform width: 950 mm Platform height: 380 mm Fork carriage width: 1,250 mm Battery Battery voltage: 48 V Battery capacity: 620 Ah Battery year of manufacture: 2013 Tires Cgohewfg Hzsx Dnk Tjt Tire type: SE MACHINE DETAILS Overall length: 2,950 mm Overall width: 1,640 mm Forklift height: 2,400 mm Weight: 5,024 kg EQUIPMENT - Charger

Condition: reconditioned (used), operating hours: 3,680 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 12,000 rpm, Spindle replacement in 2021 - approximately 3,680 spindle hours since then (estimate) Submission of a bid obligates the buyer to pick up the machine by May 20, 2025. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Spindle Speed range: max. 12,000 rpm Spindle drive power: 15 / 10 kW Max. torque: 130 Nm Tool holder: SK 40 Table Table diameter: 630 mm Max. table load: 500 kg Tool magazine Number of tool positions: 30 Max. tool length: 350 mm Feed & rapid traverse Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 – 10,000 mm/min Control Control: Heidenhain TNC 426 MACHINE DETAILS Space requirement: approx. 7.0 x 6.0 x 2.7 m Machine weight: 7,500 kg Cgohjwgaz Ijx Dnk Tet Total power requirement: 44 kVA Operating hours On-time: 89,186 h New spindle running time: 3,680 h (estimated) Total spindle running time: 35,845 h No chucks or vices included in the offer.

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 25 mm, feed length Z-axis: 150 mm, workpiece diameter (max.): 300 mm, nominal diameter: 130 mm, TECHNICAL DETAILS Control: Siemens 840 D Nominal module in steel with approx. 600 N/mm² tensile strength: 4 Largest tooth width: 25 mm Largest nominal diameter: 130 mm Largest helix angle when using 125 mm diameter cutting wheels: ± 45° Workpiece with internal gearing Nominal module in steel with approx. 600 N/mm² tensile strength: 4 mm Largest tooth width: 25 mm Largest swing diameter: 300 mm Cgjhewc Tg Nex Dnk Tjt Largest inner diameter: 130 mm Tool Largest permissible cutting wheel diameter: 175 mm Cutting wheel holder – diameter: 1.5 inches Cutting wheel holder – taper in the shaping spindle: PKP 45 hollow steep taper – Bauer Travel paths Radial (X-axis): 230 mm Manual transverse column adjustment (Y-axis): ± 25 mm Adjustment range of the axial slide (Z-axis): 150 mm Workpiece table Outer diameter: 168.14 mm Bore: 65.532 mm Spindle spindle Largest stroke length (V-axis): 30 mm Spindle axis adjustment range: ± 0.25° MACHINE DETAILS Length: 6,435 mm Width: 4,560 mm Height: 4,400 mm Weight: approx. 11,000 kg

Condition: good (used), Year of construction: 1965, Functionality: fully functional, grinding wheel diameter: 350 mm, rotational speed (max.): 32 rpm, thread length: 500 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Workpiece diameter: 200 / 250 mm Thread length: 500 mm Thread pitch: 6 - 72 mm Grinding diameter: min. 1 mm Center distance: 800 mm Module: max. 8 Helix angle: 40° Relief grinding: 0.015 - 4 mm Spindle and grinding wheel Workpiece spindle speeds: 0.19 - 32 rpm Cgjhx Djwcrvionk Tot Grinding wheel diameter: 275 - 350 mm MACHINE DETAILS Total power requirement: 11 kW Machine weight: approx. 3.6 t Space required: approx. 3.8 x 2.3 x 1.0 m EQUIPMENT - 2 dressing devices - Various accessories

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 Cgohxswcrrdo Dnk Tjt MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 12940, pressing force: 50 t, working length: 2,550 mm, stroke distance: 120 mm, TECHNICAL DETAILS Press force: 50 t / 500 kN Motor power: 5.5 kW Axes: Y1, Y2, Z Working area Bending length: 2,550 mm Stroke length: 120 mm Cohx Dnkswcqtte Togt Cylinders: 2 Speeds Lowering speed: 100 mm/s Pressing speed: max. 13.5 mm/s Retraction speed: 75 mm/s Hydraulics Oil tank: 100 l MACHINE DETAILS Length: 2,750 mm Width: 1,100 mm Height: 2,050 mm Weight: approx. 3,500 kg EQUIPMENT - Hydraulic tool clamping for the upper tool - Darley system

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm W-axis (tailstock end face): 165 - 585 mm Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Cehx Dewcrnxenk Tjgt Feed rates X-axis: 3,500 mm/min Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT - CNC control IBH - Loading device - Various accessories

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, 2 machines in a double package = 1 functional + 1 spare parts rack (identical) TECHNICAL DETAILS Control: GE FANUC 15T Tool positions: 12, all driven Spindle positioning: in 2.5-degree increments Chuck: 3-jaw hydraulic chuck Automatic tool measurement: available Cshx Dowcz U Ionk Togt Chip conveyor: available Cooling system: available Maintenance: regular

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 Cehjwc Tduox Dnk Togt MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2011, operating hours: 7,800 h, machine/vehicle number: WLHZ1076TZK055270, TECHNICAL DETAILS Operating Hours Operating hours: approx. 7,800 h Chassis Dimensions Undercarriage transport width: approx. 3,000 mm Chassis centerline (Taurus): approx. 2,280 mm Chassis length: approx. 4,600 mm Boom and Stick Hydraulic boom: 3,600 mm Stick length: 3,050 mm EQUIPMENT - Without bucket and without SMP - 20% wear on the running boards - Defective discs - see photos - Full hydraulic hoses present - Taurus condition commensurate with age Further technical data according to the manufacturer - without guarantee Engine Power according to ISO 9249: 95 kW / 129 hp at 1,800 rpm Engine type: Liebherr D 934 S according to Stage IIIA / Tier 3 Fuel tank capacity: 290 l Automatic idle: sensor-controlled Hydraulic system Hydraulic pump: Liebherr variable-displacement swashplate pump Flow rate: max. 300 l/min Operating pressure: max. 350 bar Pump control and regulation: Liebherr Synchron Comfort System (LSC) with electronic maximum load control, pressure cut-off, minimum lift control, demand flow control, swing circuit priority and torque control Hydraulic tank capacity: 175 l Hydraulic system capacity: max. 290 l Control system Power distribution: via control spools with integrated safety valves, simultaneous and independent operation of the chassis, swing, and attachment Equipment and swing operation: with proportional joystick levers Travel operation: with proportional foot pedal for travel drive Additional functions: via switches or proportional foot pedals Swing Drive: Liebherr swashplate oil motor with integrated Brake valve and torque control Transmission: Liebherr compact planetary gearbox Slewing ring: Liebherr, internally toothed, sealed single-row ball bearing slewing ring Slewing speed: 0 – 9.0 rpm, continuously variable Slewing torque: 42 kNm Undercarriage Drive: One Liebherr swashplate oil motor on each side of the undercarriage with brake valves acting on both sides Transmission: Liebherr compact planetary gearbox Travel speed stage I: 2.4 km/h Travel speed stage II: 5.0 km/h Tensile force: max. 175 kN Undercarriage: B60L, maintenance-free Track rollers/support rollers per side: 8 / 2 Track shoes: 3-grouser Track tension: hydraulic Dimensions Height: 3.1 m Cgshewgm Izox Dnk Tjt Length with folded boom: 8.7 m Undercarriage height: 1.1 m Digging depth: 6.4 m Reach at ground level: 9.7 m

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Cohx Dswffkxjnk Tegt Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, pressing force: 400 t, distance between stands: 3,400 mm, working length: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Bending length: 4,050 mm Width between columns: 3,400 mm Speed: 37.5 rpm Motor power: 37 kW Axes and control system Axes: Y1 / Y2, X, R Crowning: CNC-controlled Backgauge: CNC-controlled Crowning device: Motor-adjustable via CNC control system Cohxewd Ngus Dnk Tjgt Tooling Upper tool: 1010/A/75°, split offset Die: Multi-V die MACHINE DETAILS Dimensions (L × W × H): 5,750 × 2,110 × 3,440 mm Weight: approx. 25,000 kg Safety and handling equipment Laser protection device: on the upper beam Sheet metal support arms: 2 units on linear guides EQUIPMENT - CNC-controlled crowning - CNC backgauge - 2 sheet support arms on linear guides - Laser protection device on the upper beam - Offset, split upper tool - Multi-V die - Y1/Y2, X, and R-axis control - Operating instructions

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Cehx Dnkewc Sicj Tegt Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: refurbished (used), Year of construction: 2012, operating hours: 38,984 h, Functionality: fully functional, machine/vehicle number: 06860001401, spindle speed (max.): 5,000 rpm, turning diameter: 320 mm, TECHNICAL DETAILS Max. swing diameter: Ø 320 mm Spindle speed: max. 5,000 rpm MACHINE DETAILS On-time: 60,009 h Spindle hours: 38,984 h Machine weight: 6,000 kg Connected load: 40 kVA EQUIPMENT - Automatic workpiece feeder - Chip conveyor - High-pressure cooling system with paper filter Further technical details according to the manufacturer - without guarantee X-stroke: 650 mm Y-stroke: +90 mm / -65 mm Z-stroke: 300 mm Max. workpiece diameter: Ø 220 mm Max. workpiece height: max. 160 mm Max. chuck diameter: Ø 260 mm Cjhx Dnswcrgnsk Togt Tool turret: 12 x VDI 40 Speed: 4,000 rpm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, Includes Indunorm UL300 pallet changer (3 pallet sizes) Submission of bid obligates the buyer to pick up the item by May 30, 2025. TECHNICAL DETAILS X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping table Table dimensions: 500 mm diameter Table dimensions with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Cgehxjwgcn Do Dnk Tjt Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic tool changer Tool holder: HSK63 Number of tool positions: 80 Indunorm pallet changer Pallet size 1 for automation: 6 pcs, 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc, 398 mm x 398 mm Pallet size 2 for automation: 15 pcs, Erowa ITS115 mm Pallet size 3 for automation: 32 pcs, Erowa ITS50 mm Transfer weight including pallet: 300 kg Rapid traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed X-axis feed: 32 m/min Y-axis feed: 40 m/min Z-axis feed: 40 m/min A-/C-axis feed: 12,000°/min (equivalent to 33.3 rpm at max. 500 kg) A-/C-axis feed: 18,000°/min (equivalent to 50 rpm) MACHINE DETAILS Width: 3,200 mm Depth: 3,550 mm Height: 2,900 mm Machine weight: 16,000 kg Operating hours On-time: 41,624 h Operating time: 21,877 h Machining time: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper belt filter - Bed flushing system - Electric handwheel - 6 Parotec pallets, 398 mm x 398 mm - 1 Parotec pre-pallet for Erowa ITS, 398 mm x 398 mm - Extensive control options for Fanuc - Machine documentation - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing system - Manual flushing gun - External coolant with 3 nozzles, 7 bar - Internal coolant, 15 bar - Coolant temperature control - Internal and external air supply Disassembly and loading can be arranged through a service provider.

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: H2X391V00906, Year of construction: 2019, operating hours: 8,340 h, load capacity: 2,000 kg, lifting height: 3,280 mm, free lift: 1,680 mm, load center: 500 mm, fuel type: gas, mast type: duplex, motor manufacturer: VW, LPG forklift in clean condition, ready for immediate use, and with a valid accident prevention certificate until April 2026. Cgjhx Dnkjwc St Us Tst No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Drive type: LPG Load capacity: 2,000 kg Lift height: 3,280 mm Free lift: 1,680 mm Fork length: 1,200 mm Fork carriage width: 1,050 mm Load center: 500 mm Mast type: Duplex Engine and transmission Engine manufacturer: VW Fuel type: LPG engine Transmission: Hydrostatic Tires Tire condition: 100% new Front tire size: 200/50-10 Rear tire size: 18×7-8 Front tire type: SE-Natural (white, non-marking) Rear tire type: SE-Natural (white, non-marking) MACHINE DETAILS Total weight: 3,700 kg Overall length: 2,600 mm Overall height: 2,165 mm Height: 2,165 mm Hours: 8,340 h Color: Red UVV (accident prevention) inspection valid until: 04/2026 EQUIPMENT - Sideshift - 3rd and 4th valves - Pallet forks - Front work lights (2x ASW-LED) - Rear work lights (2x ASW) - Head protection - GRUL - New white tires (SE-natural) - Lighting - Emissions test - 1-pedal operation

Year of construction: 1965, Condition: refurbished (used), Functionality: fully functional, overall weight: 5,000 kg, load capacity: 5,000 kg, The crane was overhauled in 2012. Cshx Dowffcnenk Tsgt TECHNICAL DETAILS Hoist designation: P 35 Lifting speed: 5 m/min FEM group: 1Cm Load capacity: 5 t Rope/chain: 16 mm Y/W dimension 1: 111 mm MACHINE DETAILS Length: 7,860 mm Width: 2,900 mm Height: 1,000 mm Weight: 5,000 kg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, Functionality: fully functional, temperature: 450 °C, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, HIGHLIGHTS - High temperatures - for maximum performance Cehxewd Sgds Dnk Togt - Quick start - production volume can be preheated in just over an hour - Large print volume - for the high demand for high-end parts made of high-performance plastics - Precise manufacturing - Patented mechatronic X and Y handling - Greater stability with large prints - thanks to the ARGO vacuum leveling system - Better control - Self-leveling of the level, dual gears in the dual extruder, advanced sensor system - Spool temperature control - for dry polymers and filaments TECHNICAL DETAILS Extrusion temperature: 450 °C Hot chamber temperature: 180 °C Hot chamber parameters: Humidity, pressure, temperature Polymers and composites: PEEK, ULTEM™ AM9085F, FLEX-TPU, FUNCTIONAL-NYLON, STRONG-ABS, PP, PC-LEXANT™ AMHI240F, ABS-ESD ULTRA-PLA, Carbon PEEK, and Carbon PA PRO Print Volume: 500 x 500 x 500 mm X, Y, and Z Accuracy: 10 / 25 µm Resolution Quality/Speed: 0.225 / 0.300 mm Print Speed: 5,000 mm/min Extruder Tip 2-B: 0.4 mm and 0.6 mm Extruder Tip 2-HA: 0.4 mm and 0.6 mm Extruder Tip 3-HSA: 0.4 mm and 0.6 mm MACHINE DETAILS Dimensions: 1,935 x 1,436 x 2,375 mm Weight: 1,700 kg Power Supply: 15 kVA / 400 V AC / 50 Hz DESCRIPTION - High-performance structure made of aluminum rods and steel cover - Precision ball bearing system and ground steel linear guides - Mechatronic X- and Y-axis motion with hardened C5 helical gear rack and pinion - Z-axis motion with a system of precise C6 ball screws - Moving components and aluminum supports with precision CNC machining - Vacuum system for polymer layer adhesion - Automatic build plate leveling - Security system with door lock - Integrated HT dryer with temperatures up to 120°C and automatic filament loading - Controlled chamber with forced ventilation - Pneumatic assist system Hyperspeed – optional upgrade available (€30,000)

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Cgshjwc Shfox Dnk Tot Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Cgohswc T Aqox Dnk Tst Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, overall weight: 13,700 kg, load capacity: 32,000 kg, TECHNICAL DETAILS Crane span: 11,650 mm 1st hoist Cgohx Dnkswfd Age Tot Manufacturer: Stahl Type: AS7080-16 L1 Year of manufacture: 2012 Load capacity: 32,000 kg FEM: 2 m Lifting height: 7,000 mm 2nd hoist Manufacturer: Stahl Type: ST1005-8/2 Year of manufacture: 2013 Load capacity: 500 kg FEM: 1AM Lifting height: 8,000 mm MACHINE DETAILS Length: 12,000 mm Width: 2,200 mm Height: 1,000 mm Weight: 13,700 kg EQUIPMENT - Radio control - Connection for magnetic or vacuum beam - Inspection log book available

Condition: refurbished (used), Functionality: fully functional, overall weight: 11,000 kg, Year of construction: 1981, drive type: elektrisch, lifting capacity: 25,000 kg, Equipment: documentation/manual, General overhaul of the hoist in 2012 TECHNICAL DETAILS Lifting capacity: 25 t Crane span: 11,975 mm Cab span: 1,600 mm Cab hook path: 10,000 mm Number of wheels: 4 Crane wheel diameter: 500 mm Cshx Dnjwfdncjk Tsgt Main frame Speed: 3.1 / 0.5 m/min Power: 15 / 2.5 kW Cab trolley Speed: 20 / 5 m/min Power: 1.25 / 0.32 kW Crane trolley Speed: 40 / 10 m/min Power: 1.2 / 0.25 kW MACHINE DETAILS Length: 12,000 mm Width: 1,600 mm Height: 1,000 mm Weight: 11,000 kg Electrical System Drive type: electric Operating voltage: 400 V / 50 Hz Control voltage: 230 V EQUIPMENT - Load hook - Radio control - Inspection log included