Condition: excellent (used), Year of construction: 2009, Ref:11042 . 2009 Horizon BQ-270 Excellent condition - Only 409,000 books produced! Single clamp solo binder designed for operation by one person. With auto calliper for automatic size setting Comprising: Touch-screen auto setting of thickness and cover scoring. Hand feed station Milling & roughing unit with dust bag Hot-melt spine glue unit with side gluing discs Automatic cover feeder with pressing unit Chute delivery unit Including tools, manuals and accessories Accessories: Phjdpox Nfmhofx Ah Uja Auto calliper for automatic size setting Specification: Book size, Max: 660 x 320mm Min: 240 x 135mm Cover size, Max: 320 x 310 mm Min: 135 x 115 mm Thickness, Max: 50mm Min: 1mm Max speed : 500 cycles/hr.

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. Psdpfox Ifk Djx Ah Ueha ?v=iV2YFSJEqPc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Phjdpfxsx D Dzqj Ah Uja Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Year 2011 Condition Excellent Podpottlzfefx Ah Ujha Approx Working Hours 25,390 Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Max material width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Maximum cycles-minute 45 Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: good (used), twin decoiler double mandrel 6 ton per side 1400mm wide hydraulic expansion powered rotation with stop start down loop control floor mounted hydraulic coil loading car Phodpfx Ajivdn Doh Usa

Condition: like new (used), Year of construction: 2022, 2022 CUMMINS DIESEL ENGINE MODEL QSL9-G5 with Power Command Digital Control Phjdox H Tlmepfx Ah Uja S/No. 22F84536258. (2022). Supplied in 2022 this unit has never been run and remains as New.

Condition: excellent (used), Year of construction: 2016, Ref: 11041 . 2016 Horizon Stitchliner 5500-S. Excellent condition - Only 1.6m on the counter! Fully automatic setting Saddle Stitched Booklet System. Pjdox Nflwspfx Ah Usha Features: • 10.4” icon-based 200 job memory colour touchscreen • Simple, fast set-ups by non-specialist finishing operators • Advanced all-system automation • Make-ready in seconds, next-to-no-waste, on-demand working • Works from flat-sheet 4-page sections • No need to pre-fold • Integrated automatic set-up 3-knife trimmer • No need to pre-trim • Score, plough fold, registration and genuine saddlestitch • High quality books with sharp spine definition • High efficiency from runs-of-one Comprising: CF-400 feeder with touch-screen control ST-40 Stacker /bypass to; ACF-40 Accumulator/Folder with double gate-fold to; SPF-30S Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-30S Three knife trimmer unit with hand-feed station TB-30 extraction system LC-20 Long belt delivery Specification: Max sheet size: 350W x 500L mm Min sheet size: 148 x 210 mm Max stitch thickness: 6 mm. Production speed up to 6,000 booklets per hour, dependent on stock

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Phjdex Ifiyopfx Ah Usa

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm Phodpfjx D H T Aox Ah Uja This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Phodeuzi I Eopfx Ah Uea Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Condition: good (used), Year of construction: 2005, Daewoo Puma TT 2000SY Twin Turret Turning Centre with Fanuc 18i-TB CNC Control Phsdpfox H Thbox Ah Usa With Hydrafeed Multifeed MX-1B Short Magazine Automatic Bar Feed. Swing Over Bed 800mm. Swing Over Saddle 620mm. Max Turning on Upper Turret Ø390mm. Max Turning on Lower Turret Ø300mm. Max Working Length 350mm. Max Bar Ø65mm. 'X1' Axis Travel 255mm, 'X2' Axis Travel 190mm. 'Z1' Axis Travel 800mm, 'Z2' Axis Travel 900mm. 'Y' Axis Travel 120mm (+ or - 60mm). 'B' Axis 810mm. 'C' Axis 360°. (1) Kitagawa BB08 Power Chuck Ø210. (1) CRS66 Power Collet Chuck, Gripping Range 4mm-66mm. Main Spindle Nose A2 No.6 with Ø76mm Through Hole & Ø66mm Bore of Draw Tube & Max Speed of 5,000RPM. Twin Turret each with (12) Tool Stations. Tool Size 25mm x 25mm, Boring Bar Size Ø40mm & Spindle Speeds 4,000RPM. LNS Turbo 62878680E Swarf Conveyor (2005). Puma S/No. PT 20SY0047. Hydrafeed Multifeed MX-1B Automatic Bar Feed. Approx Ø3 - Ø80mm x 1,250mm Long Bar Range with Hydrafeed Controller, S/No. 202618. Includes Probe Arm, Signal Tower, (2) Machine Lights & (2) KF-101P Foot Switches. Dimensions of Turning Centre Approx 4,100mm x 2,300mm x 2,600mm High, Weight Approx 11,600kg. Please note: Filtermist FX 4000 XCEL 2 Oil Mist Filter Extraction is not included with the machine.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Phedpfox D Dzwox Ah Usa Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Psdpfx Ahsw Rpzqj Ueha Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Psdpfx Aex D E Raoh Ujha Application Types Turning

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Make Illig Model RV 74 Pedpfxsxp H Nue Ah Usha Year 1999 Hours Approx TBC Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Depth of Draw Above-Below 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 20 / min Total Weight 6,600 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Pedpfx Ahex D Dz De Usha Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. Pedpfx Aovbcbush Usha All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Phodox D H Hiepfx Ah Uoa Application Types Milling

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Phjdpfjwkkpqex Ah Uoa Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Movement Pedpfsx D Dz Rsx Ah Ujha X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2022, operating hours: 1,615 h, functionality: fully functional, Make Kiefel Model KMD 78.1 PR Year 2022 Condition Excellent Delivery date Immediately Approx hours 1615 Stations Four Max tool dimensions 780 x 600 mm Maximum forming area 760 x 580 mm Minimum forming area 375 x 350 mm Sheet thickness range 0.2 - 1.8mm Depth of draw 150 mm +/- Max film width 810 mm Cutting Station Force 500 kN Phsdpfsxwwf Nex Ah Uja Hole Punching Station Force 300 kN Operating pressure 6 bar Max dry cycles / min 40 All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Application Types Phjdpfxex D Ngle Ah Uea Pressing / Laminating

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Manufacturer Reifenhauser Model PP Extrusion Line Year 2001 Condition Very Good Stock Number 00027 Materials PP Max PP Material Thickness 300 - 2000 μ Max Sheet Width 1050 mm Max Output 600 kg/h at 0.8-1.2mm sheet Max Roll Diameter 800 mm Power Supply 380V 60Hz All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. Psdowzkmwspfx Ah Uoha

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Pjdpsx D H Uaofx Ah Ujha Application Types Milling

Condition: excellent (used), Year of construction: 2006, operating hours: 29,750 h, Stations: Forming, Cutting and Stacking Max Forming Area: 500 x 350 mm Min Forming Area: 300 x 160 mm Film width: 540 mm Height of Forming Above-Below Material Level: 100 / 40 mm Max Mould Closing Force: 55 kN Forming Pressure: 2 bar Podpfxew Rp Eie Ah Uoha Cycles/Min: 40 Total motor power: 32 kW Total heating power: 44,9 kW Rated current: 115 A Dimensions (L x W x H): 8,3 x 2,3 x 2,5 m