Condition: excellent (used), Year of construction: 2009, Ref:11042 . 2009 Horizon BQ-270 Excellent condition - Only 409,000 books produced! Single clamp solo binder designed for operation by one person. With auto calliper for automatic size setting Nedpfsx Nfmhsx Ah Uowr Comprising: Touch-screen auto setting of thickness and cover scoring. Hand feed station Milling & roughing unit with dust bag Hot-melt spine glue unit with side gluing discs Automatic cover feeder with pressing unit Chute delivery unit Including tools, manuals and accessories Accessories: Auto calliper for automatic size setting Specification: Book size, Max: 660 x 320mm Min: 240 x 135mm Cover size, Max: 320 x 310 mm Min: 135 x 115 mm Thickness, Max: 50mm Min: 1mm Max speed : 500 cycles/hr.

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Nodpfsx Ifk Dox Ah Ujwr Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Nsdpfx Aox D Dzqjh Uewr Milling

Condition: good (used), twin decoiler double mandrel 6 ton per side 1400mm wide hydraulic expansion powered rotation with stop start down loop control floor mounted hydraulic coil loading car Nwjdpfx Asivdn Deh Uer

Condition: like new (used), Year of construction: 2022, 2022 CUMMINS DIESEL ENGINE MODEL QSL9-G5 with Power Command Digital Control Nedpfex H Tlmox Ah Uowr S/No. 22F84536258. (2022). Supplied in 2022 this unit has never been run and remains as New.

Condition: used, Year of construction: 2013, operating hours: 17,526 h, functionality: fully functional, overall weight: 29,900 kg, number of blades: 112, control cabinet length: 1,500 mm, rotor length: 2,800 mm, power: 2 kW (2.72 HP), rotational speed (max.): 112 rpm, The LINDNER POLARIS 2800 is a powerful, high capacity single shaft shredder that is primarily used for the shredding of waste with foreign parts – like for example pre-treated domestic waste, commercial and industrial waste, as well bulky waste etc. The resultant output material is an defined granulate which could be used direct for incineration. The POLARIS 2800 can be optimally adapted for different applications by individual configuration and equipment components. this machine was manufactured and had extensive repair work in 2016 £150k ex works uk Nwsdpfx Aswhyygeh Uor

Condition: excellent (used), Year of construction: 2016, Ref: 11041 . 2016 Horizon Stitchliner 5500-S. Excellent condition - Only 1.6m on the counter! Fully automatic setting Saddle Stitched Booklet System. Features: • 10.4” icon-based 200 job memory colour touchscreen • Simple, fast set-ups by non-specialist finishing operators • Advanced all-system automation • Make-ready in seconds, next-to-no-waste, on-demand working • Works from flat-sheet 4-page sections • No need to pre-fold • Integrated automatic set-up 3-knife trimmer • No need to pre-trim • Score, plough fold, registration and genuine saddlestitch Nedpfx Ahjx Nflwj Uewr • High quality books with sharp spine definition • High efficiency from runs-of-one Comprising: CF-400 feeder with touch-screen control ST-40 Stacker /bypass to; ACF-40 Accumulator/Folder with double gate-fold to; SPF-30S Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-30S Three knife trimmer unit with hand-feed station TB-30 extraction system LC-20 Long belt delivery Specification: Max sheet size: 350W x 500L mm Min sheet size: 148 x 210 mm Max stitch thickness: 6 mm. Production speed up to 6,000 booklets per hour, dependent on stock

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Nwodpfx Ahjx Ifiyj Ujr

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Nwodox D H T Aopfx Ah Ujr Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2000, Huron MU6 Universal Ram Type Milling Machine Oct 2000 YOM 40 INT Taper Table 2000mm x 450mm Table power feeds & rapids inn all directions Double swivel vertical head X axis travel - 1500mm Y axis travel - 700mm Nodpfxex Ivx Eo Ah Uewr Z axis travel - 550mm DRO Max spindle speed 2066rpm Interlock spindle guarding Weight 4000kgs Excellent condition

Condition: good (used), Year of construction: 2005, Daewoo Puma TT 2000SY Twin Turret Turning Centre with Fanuc 18i-TB CNC Control Nodpjx H Thbjfx Ah Uewr With Hydrafeed Multifeed MX-1B Short Magazine Automatic Bar Feed. Swing Over Bed 800mm. Swing Over Saddle 620mm. Max Turning on Upper Turret Ø390mm. Max Turning on Lower Turret Ø300mm. Max Working Length 350mm. Max Bar Ø65mm. 'X1' Axis Travel 255mm, 'X2' Axis Travel 190mm. 'Z1' Axis Travel 800mm, 'Z2' Axis Travel 900mm. 'Y' Axis Travel 120mm (+ or - 60mm). 'B' Axis 810mm. 'C' Axis 360°. (1) Kitagawa BB08 Power Chuck Ø210. (1) CRS66 Power Collet Chuck, Gripping Range 4mm-66mm. Main Spindle Nose A2 No.6 with Ø76mm Through Hole & Ø66mm Bore of Draw Tube & Max Speed of 5,000RPM. Twin Turret each with (12) Tool Stations. Tool Size 25mm x 25mm, Boring Bar Size Ø40mm & Spindle Speeds 4,000RPM. LNS Turbo 62878680E Swarf Conveyor (2005). Puma S/No. PT 20SY0047. Hydrafeed Multifeed MX-1B Automatic Bar Feed. Approx Ø3 - Ø80mm x 1,250mm Long Bar Range with Hydrafeed Controller, S/No. 202618. Includes Probe Arm, Signal Tower, (2) Machine Lights & (2) KF-101P Foot Switches. Dimensions of Turning Centre Approx 4,100mm x 2,300mm x 2,600mm High, Weight Approx 11,600kg. Please note: Filtermist FX 4000 XCEL 2 Oil Mist Filter Extraction is not included with the machine.

Condition: excellent (used), Used 450 kva Volvo Diesel Generator Engine diesel Volvo TAD1640GE Stamford alternator, RPM 1500, Hertz 50, Phase 3, Voltage 400, Working hours 85, Njdpfx Asunb Sbjh Uswr

Condition: used, Used NAUTAMIX Stainless Steel Mixer No. 20095 Similar to the Type MBX10 Useful capacity : 1000 litre Gear motor : 0.37 kw – Hp 0.5 – Rpm 58 – 3x 220/380 volts Motor : 3 kw – Hp 4 – Rpm 1500 – 3x 380 volts Nwjdpfx Ajx Hwfdeh Uer

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Nodpox D Dzwefx Ah Uewr Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Nodpox H Tbbefx Ah Ujwr Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included.

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Nodpfxox D E Rae Ah Ujwr Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1996, Harrison Alpha 550 CNC Straight Bed Lathe Approx Ø550mm Swing Over Bed. Distance Between Centres Approx 2,000mm. Turning Speeds 15-1,800 RPM. Ø90mm Spindle Bore. (1) Ø300mm - 3 Jaw Chuck. (1) T3 Dickson Quick Change Toolpost. Manual Tailstock, 5 Morse Taper. (1) YP-150 Coolant Pump (1998). S/No. A50029. Note: Only Plastic Materials Have Been Cut On This Machine. This Lot Includes (3) Assorted Toolholder Blocks. Dimensions Of Machine Approx 3,100mm x 1,550mm x 1,700mm High. Power Input 415 Volt, 3-Phase, 11kW. Nwedpfx Asx H S Uyoh Uor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Nedpfox D Dz Dsx Ah Uowr Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: good (used), AXYZ Series 4008 CNC Router Njdpfxex H S Ugo Ah Uswr Single Head. Hand CNC Controller. Capacity Approx 1,525mm (60") x 2,438mm (96") With Approx Maximum 150mm Adjustable Clearance. 'T' Slotted Table Size Approx 1,500mm x 3,000mm with (10) 'T' Slots. HSD 'ES 919A 2P 08.00kW' Variable Speed Air Cooled Spindle, 24,000 Maximum RPM, 19kW, 25.5Hp Peak Power. AXYZ '7G' 7-Station ISO 30 Automatic Tool Changer with Vexta 'PK 299' 2-Phase Stepping Motor. Vacuum & Pressure Limited 'VP1-530' 4.6kW Vacuum Pump. Please Note: There Is No Software With This Machine. Dimensions Of Machine Approx 3,000mm x 2,200mm x 1,600mm High (Including Bed Height Of 900mm & Bridge Height Of Approx 700mm). Please Note: There Are No Toolholders Included In This Sale.

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Milling Nwedpfxjx D H Hij Ah Uer

Condition: like new (used), GMT GLOBAL SHRINK FIT EQUIPMENT & TROLLEY Nodpfxox H S Iyo Ah Ujwr Ex demo' absolutely as new. Only been used at exhibitions and demonstrations. GIS-6 Induction Coil Shrink Fit Machine single Phase 230v 27A 6KW together with GCS-1 Cooling Unit. 30 40 50 ISO and HSK63A. Includes Vertex Tool Trolley and extras.

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Nedpfxsx D Nglj Ah Uswr Application Types Pressing / Laminating

Condition: good (used), Agie Charmilles SP3 EDM Die Sink Machine Nwjdpfx Ahsx H Rxks Uer S/No. MON30 NR-001014. With Filtermist. Rolls-Royce Approved Contractor (PIC) will need to remove item. Please contact PIC for a quote, contact details can be found in the Essential Information section. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Rolls-Royce Approved Contractor (PIC) will need to remove item. Please contact PIC for a quote, contact details can be found in the Essential Information section.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Nwjdpfxex D Dz Rj Ah Ujr Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Application Types Nwedpjx D H Uajfx Ah Uor Milling