Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Ijdjx A Umnspfx Ah Uebf Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, New price: €215,000 TECHNICAL DETAILS Type of CNC control: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Sub-spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis data X1/Y1/Z1 Travel X1/Y1/Z1 (with turning quill): 70 / 405 / 100 (240) mm Maximum speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum acceleration X1/Y1/Z1: 5 m/s² Nominal thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data Slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data Slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data sub-spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication unit data Capacity: 1.8 L Operating pressure: 20 bar Idle period: 7 min Operating period: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic unit data Min. operating pressure: 5 bar Max. operating pressure: 6 bar Base machine consumption: 180 NL/min MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) Power-on hours: 3,743 h Spindle hours: 2,138 h EQUIPMENT - with bar feeder 32 x 3000 mm - different channels for bar feeder - high-pressure unit Iodpjx Eikgjfx Ah Ujbf - conversion kit for short turning - various collets, guide bushes, and tooling

Condition: new, Year of construction: 2022, functionality: fully functional, planing width: 800 mm, table length: 1,200 mm, workpiece height (max.): 300 mm, roll diameter: 150 mm, Machine is completely new and unused! TECHNICAL DETAILS Planing width: 800 mm Feed table length: 1,200 mm Feed belt speed: 4 - 19 m/min Workpiece thickness: 3 - 300 mm Extraction nozzle outlet: 180 mm 4-knife planing cutterhead diameter: 150 mm MACHINE DETAILS Motor speeds: 1/6 mm/s Iedpfx Ahjx Eiure Ujbf Motor power: 20 HP (15kW) EQUIPMENT Segmented serrated feed roller Two table relief rollers Two rubber-coated outfeed rollers Electromagnetic brake Automatic star-delta start Automatic table adjustment Tersa-type cutterhead Knife setting gauge 4-point table fastening Noise insulation Machine built according to CE electrical and safety standards

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Ijdox Arq Dopfx Ah Ujbf Through-feed dryer including exhaust ducts (each approx. 7.5 m) in double-walled stainless steel design! MACHINE DETAILS Max. solvent throughput: 5.00 kg/h Air and exhaust specifications Pipe diameter: 150 mm Exhaust air volume: approx. 900 m³/h Temperature: max. 180°C Pressure loss: max. 100 Pa Fresh air volume: approx. 1,800 m³/h (Σ) Dimensions & Weight Dimensions (L x W x H): 10,900 x 2,840 x 1,142 mm Total weight: 4,000 kg Input voltage: 400 V Input current: 22 A EQUIPMENT Documentation/manual Exhaust ducts (double-walled stainless steel version, each approx. 7.5 m)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! Ibodpfjx Di Uisx Ah Uef TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, resolution (max.): 1,000 dpi, laser power: 80 W, operating speed: 3,200 mm/s, table length: 600 mm, table width: 1,000 mm, machine/vehicle number: JL2022059, TECHNICAL DETAILS Table length: 600 mm Table width: 1,000 mm Cutting speed: 21,120 mm/min Operating speed: 3,200 mm/s Workpiece height (max.): 230 mm Iodpsx E Snwofx Ah Uobf Laser power: 80 W Resolution (max.): 1,000 dpi Laser type: CO2 laser MACHINE DETAILS Power supply: 230 V Dimensions & Weight Dimensions: 1,480 x 900 x 1,120 mm Weight: 300 kg EQUIPMENT Compressor JustAir PRO accessories Rotary engraving device for JL 7.5 and 10.6 Aluminum grid cutting table with vacuum function LED interior lighting Autofocus with Microsonic sensor Computer system with Mini PC 8th Gen Intel i7-8569U for machine control Table (SogesFurniture BHEU-101-OK) Chair (WOLT Bar stool BH113an) Mounts and peripherals (Samsung Curved Monitor C24F396FHR, 24 inch) Compressed air kit, extension for external compressed air incl. compressor and all hoses.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 1178530-01, operating speed: 4 mm/s, A nearly new Heidenhain TS 460 touch probe with SK 40 mounting is up for auction here! TECHNICAL DETAILS Speed: 4 mm/s Reference temperature: 22 °C ± 1°C EQUIPMENT Ibsdpfx Aex A T H Teh Ujf Manual Matching case

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Ijdpfx Ahox D T A De Uebf Control brand: SIEMENS Control model: SINUMERIK 802C

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, planing width: 630 mm, planing height: 250 mm, number of planer blades: 4, table length: 1,100 mm, empty load weight: 700 kg, TECHNICAL DETAILS Planing width: 630 mm Planing height: 250 mm Number of planer knives: 4 Feed speed: 7 + 14 m/min Table length: 1,110 mm MACHINE DETAILS Motor: 7.5 kW Ijdpfxsx Eir Rs Ah Usbf Extraction port: 160 right Dimensions & Weight Dimensions (L x W x H): 1,070 x 1,200 x 1,060 mm Weight: approx. 700 kg EQUIPMENT Motor brake Electric height adjustment Digital display Tersa quick-change system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Ibjdpfx Ajx Aph Hjh Uef Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Table Table dimensions: 3,800 x 1,000 mm Spindle Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Positions: 40 CNC control Model: SELCA S 4045 PDH MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: Q0EC156, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: Fanuc 0i MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 450 mm Travel Y: 300 mm Travel Z: 300 mm Tool changer: 12-position Iedpfx Ahsx Agtys Uobf Spindle taper: BT30 Spindle speed: 10,000 rpm MACHINE DETAILS Controller: Fanuc 0i MD EQUIPMENT Various tool holders Operating manual

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Ibodpfxjx Dmgvs Ah Uef Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: ready for operation (used), functionality: fully functional, working width: 2,500 mm, bending angle (max.): 90 °, sheet thickness (max.): 4 mm, overall weight: 4,300 kg, TECHNICAL DETAILS Bending angle: 0 - 90 degrees Bending width: 2,500 mm Max. bending thickness: 4 mm Max. jaw opening: 100 mm MACHINE DETAILS Weight: approx. 4,300 kg Isdpfx Asx A Uf Deh Uebf EQUIPMENT Additional tools (as per images) Wiring diagram

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516330J00044, Year of construction: 2018, operating hours: 1,265 h, load capacity: 4,990 kg, lifting height: 4,000 mm, mast type: duplex, fork length: 1,200 mm, fork width: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 4,990 kg Lifting height: 4,000 mm Clearance height: 2,800 mm Fork length: 1,200 mm Maximum fork width: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 mm x 1,400 mm x 2,800 mm Unladen weight: 7,726 kg Mast: Duplex Number of wheels: 4 Drive: Electric Battery Brand/Type: 80V 6PZM 930 Year of battery: 2021 Capacity: 930 Ah Battery voltage: 80 V Battery test result: 60% Ibjdpfox Hzziox Ah Uof Operating hours: 1,265 h EQUIPMENT Side shift Non-marking tyres Work lights CE marking User manual

Condition: used, Used approximately 1500 litre continuous Eirich model RV19 batch mixing system. The RV19 mixer has approximately 36m3/h (50 tonnes/hour) throughput. Unit is rated atmospheric internal pressure. The system includes: - (3) Additive dosing hoppers - A 1 tonne bagging system - DCE-Unimaster LEV system - Discharge chutes and feed screws - Siemens PLC control unit Isdpfx Ahox Hv Rlj Uobf - Weighing scales with digital readout - Ingersol Rand air compressor - (3) Loss in weight hoppers - Receiver hoppers with rotary valve feeds - Tubular screw conveyors - Bulk bag discharge unit and conveyor - Siemens touch control panel - Emergency stop control panel - Associated steelwork and gantry

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14599631, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, The tool measurement system and the touch probe were retrofitted in 2022 for a total of EUR 15,000. The machine is prepared for 4th and 5th axis operation! TECHNICAL DETAILS Travel X: 500 mm Ibodpfsx Agp Iex Ah Uof Travel Y: 350 mm Travel Z: 610 mm Spindle speed: 18,000 rpm Spindle taper: SK30 Tool changer: 24 positions MACHINE DETAILS Operating hours Program run: 13,613 h Machine on-time: 39,034 h Control on-time: 38,758 h EQUIPMENT Connection and drives for 4th/5th axis 3D touch probe Heidenhain TS642 Tool measurement Heidenhain TT140 Spindle chiller unit Heidenhain HR410 electronic handwheel Approx. 30 tool holders Collets Complete documentation 3D touch probe

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 27159, Year of construction: 2000, operating hours: 6,760 h, load capacity: 10,000 kg, lifting height: 3,770 mm, mast type: duplex, fork length: 1,530 mm, fork width: 1,330 mm, TECHNICAL DETAILS Lifting capacity: 10,000 kg Lifting height: 3,770 mm Clearance height: 2,870 mm Fork length: 1,530 mm Max. fork width: 1,330 mm Min. fork width: 390 mm MACHINE DETAILS Iodpfx Ahex Hzvms Uebf Mast: Duplex Number of wheels: 4 wheels Drive: Electric Battery voltage: 72 V Dimensions & Weight Dimensions (L x W x H): 3,150 x 1,500 x 2,870 mm Unladen weight: 13,650 kg Operating hours: 6,760 h EQUIPMENT User manual Side shift Fork adjustment Work lights Camera

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 199851086/1098, table width: 1,600 mm, overall weight: 6,700 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 400 mm, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 680 mm Z-axis travel: 400 mm Table width: 1,600 mm Table depth: 670 mm Magnet width: 1,200 mm Magnet depth: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,900 x 3,000 x 2,500 mm Net weight: 6,700 kg Control: Conventional Power: 11.0 kW Isdpsx Hzuvjfx Ah Ujbf EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 430290898, table width: 2,000 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 550 mm, TECHNICAL DETAILS X-axis travel: 1,500 mm Y-axis travel: 900 mm Z-axis travel: 550 mm Table width: 2,000 mm Table depth: 900 mm Magnet width: 1,500 mm Magnet depth: 800 mm Power: 60.0 kW Max. spindle speed: 3,000 rpm Isdpfx Aox Hztlsh Uebf MACHINE DETAILS Weight: 21,000 kg Control manufacturer: Unicon EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, workpiece weight (max.): 100 kg, gear diameter: 300 mm, controller model: Optronic CNC D140, center height: 250 mm, table length: 2,300 mm, TECHNICAL DETAILS Centre height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm Gear diameter: 300 mm Module range: 0.5 mm - 8 mm Helix angle: 35° Maximum workpiece weight: 100 kg MACHINE DETAILS Control type: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Isdpfx Ahex Hzrze Usbf Number of transport packages: 5

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,148 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, table length: 2,500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Number of axes: 3 Table length: 2,500 mm Table width: 600 mm Tool holder: SK40 Main spindle power: 20 kW Max. spindle speed: 12,000 rpm Ijdpox Hzn Aefx Ah Usbf Tool magazine: 30 MACHINE DETAILS Dimensions (L x W x H): 5,000 x 2,500 x 3,000 mm Net weight: 10,500 kg Power: 20 kW Operating hours: 11,148 h EQUIPMENT - Tool magazine - Chip conveyor - External cooling - without machine vices.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1000040377, total length: 2,000 mm, total width: 2,500 mm, total height: 2,100 mm, Equipment: CE marking, documentation/manual, MACHINE DETAILS Main motor power: 10 kW Voltage: 400 V Current consumption: 18 A Fuse: 32 A Output: 10.0 kW Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Shipping units: 2 pieces Ibsdjx Hhc Hopfx Ah Ujf EQUIPMENT Saw unit Documentation Electrical schematics User manual CE marking

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, MACHINE DETAILS Voltage: 400 V Current consumption: 50 A Dimensions (L x W x H): 3,600 x 1,480 x 1,200 mm Transport packages: 4 units EQUIPMENT Ibodpfx Aox Hhb Neh Uof Electrical schematics User manual Operating system Tools for unit 1 Tools for unit 3 Tools for unit 4 Tools for unit 5 Tools for unit 6 Tools for unit 7

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 409081, saw blade diameter: 300 mm, cutting length (max.): 8,000 mm, cutting height (max.): 3,000 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! Ibjdpfx Ahsx Hg Uhj Uef TECHNICAL DETAILS Max. cutting height (vertical): 3,000 mm Max. cutting width: 8,000 mm Max. saw blade diameter: 300 mm MACHINE DETAILS Voltage: 400 V Power consumption: 8 A Fuse: 16 A Power output: 3.0 kW EQUIPMENT CE marking Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,717 h, functionality: fully functional, machine/vehicle number: 904B0018, table width: 3,500 mm, table length: 14,400 mm, saw blade diameter: 1,000 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Maximum saw blade diameter: 1,000 mm C1: 540° B1: 250° C2: 540° B2: 90° Table length: 14,400 mm Iedpfx Ahex Hg Sto Usbf Table width: 3,500 mm X-axis maximum travel: 5,000 mm Y-axis maximum travel: 15,870 mm Z-axis maximum travel: 1,000 mm MACHINE DETAILS Number of milling spindles: 1 Number of controlled axes: 2 5-axis unit power: 12 kW Operating hours: 1,717 h Main motor power: 55 kW Voltage: 400 V Current consumption: 130 A Power: 65 kW Transport dimensions (L x W x H): 40,000 mm x 2,400 mm x 2,700 mm EQUIPMENT Saw blade unit with flange connection Milling unit with tool changer Documentation CE marking