Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 17496, Year of construction: 2017, operating hours: 11,962 h, load capacity: 3,500 kg, lifting height: 5,450 mm, free lift: 1,870 mm, mast type: triplex, fork width: 1,240 mm, TECHNICAL DETAILS Lift height: 5,450 mm Free lift: 1,870 mm Fork length: 1,160 mm Fork width: 1,240 mm Maximum fork width: 1,240 mm Minimum fork width: 440 mm Lifting capacity: 3,500 kg MACHINE DETAILS Mast type: Triplex Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,600 x 2,720 mm Weight: 6,900 kg Fuel type: electric Year of battery: 2016 Battery capacity: 775 Ah Battery voltage: 80 V Travel direction: 4-way Hedpfx Abox Ahw Ts Usfr EQUIPMENT Attachment: Fork spreader Documentation CE marking Tested until: 12.2025

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Hfsdpsx An Uxofx Ab Uor Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel path X-axis: 700 mm Travel path Y-axis: 400 mm Travel path Z-axis: 330 mm Spindle speed (max.): 10,000 rpm Rapid traverse X-axis: 54 m/min Rapid traverse Y-axis: 54 m/min Rapid traverse Z-axis: 54 m/min Table dimensions (L x W): 410 x 850 mm Table load capacity: 300 kg MACHINE DETAILS Type of input power: Three-phase current Total weight: 2,200 kg EQUIPMENT Documentation/manual Hfjdpsx Ap Rnjfx Ab Uor Continuously variable spindle speed Large chip container High-pressure coolant pump through spindle Extraction system Data server in both machines (FTP accessible) Fanuc Program Transfer Tool (software) Manuals

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1120 000155 3, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item by 16.01.2026! For loading, a complete semi-trailer with a height of 3 m is required. The consignment comprises 8 packages. Hfsdpfx Asxywlzeb Usr

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Travel Z-axis: 710 mm Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Hfodpfjx Ap S Ejx Ab Uor Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Control unit: Heidenhain iTNC 530 Note: The machine can still be inspected under power until week 50.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 4,800 dpi, paper weight (min.): 52 g/m², paper weight (max.): 360 g/m², counter reading (black): 894,166, counter reading (color): 1,513,515, TECHNICAL DETAILS Hodpfx Abjx Ecp As Uefr Paper weight (min.): 52 g/m² Paper weight (max.): 360 g/m² Speed: 85 A4 pages/minute Resolution: 2,400 x 4,800 dpi Paper formats: A6 to 330.2 x 487.7 mm Banner sheet option: up to 330.2 x 1,260 mm MACHINE DETAILS Operation: 17-inch color touchscreen Warm-up time: < 300 seconds Counter reading color: 1,513,515 clicks Counter reading B/W: 894,166 clicks EQUIPMENT Vacuum Feed LCIT RT5120 (2,200 sheets each, incl. Bridge Unit BU5010) Decurl Unit DU5060 Booklet Finisher SR5060 (stacking up to 3,000 sheets, stapling up to 100 sheets, booklet stitching) EFI Color Controller E-45A (Fiery FS300 Pro) with 1 TB HDD, 8 GB RAM, Windows 10 Enterprise EFI Impose (imposition and gang printing) ES-2000 (UV & Non-UV) spectrophotometer TCRU/ORU Type S9 (Set A) ORU Type S9 (Set B)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516329J00102, Year of construction: 2018, operating hours: 11,771 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 1,530 mm, mast type: triplex, fork width: 2,050 mm, TECHNICAL DETAILS Lifting capacity: 5,000 kg Lift height: 4,400 mm Free lift: 1,530 mm Fork length: 2,400 mm Maximum fork width: 2,050 mm Minimum fork width: 560 mm Overall height (under clearance): 2,320 mm Mast type: Triplex MACHINE DETAILS Dimensions & Weight Hodpfxox Ahnfs Ab Usfr Dimensions (L x W x H): 2,900 x 1,400 x 2,320 mm Unladen weight: 7,616 kg Fuel type: Electric Battery capacity: 930 Ah Battery voltage: 80 V Number of wheels: 4 Operating hours: 11,771 h EQUIPMENT Fork positioner Side shift Heater Full cabin Free lift Work lights

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Hfodpfxsx Af S Uo Ab Uor Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Hfodsx A Df Tspfx Ab Usr Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Hedox A Tzqopfx Ab Usfr Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, controller model: FANUC 21M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 565 mm Speed: max. 12,000 rpm Number of pallets: 2 Pallet size: 400 mm × 400 mm MACHINE DETAILS Hfodpfxoxz Ax Ao Ab Ujr Control: FANUC 21M

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 4,000 rpm, controller model: Fanuc 18i-TB, TECHNICAL DETAILS Swing diameter over bed: 560 mm Swing diameter over cross slide: 520 mm Spindle bore: 130 mm Spindle speed: 33 rpm – 4,000 rpm X-axis travel: 260 mm Z-axis travel: 600 mm MACHINE DETAILS Control: Fanuc 18i-TB Power: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,300 x 2,900 mm Transport weight: 7,500 kg Transport packages: 4 EQUIPMENT C-axis Three-jaw chuck Hsdsx Ahlwjpfx Ab Uefr Facing lathe Chip conveyor Driven tools

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Hedpex A Dbbsfx Ab Uofr Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,832 h, functionality: fully functional, turning length: 135 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 42 mm, controller model: FANUC 18i-TB, Equipment: bar feeder, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 135 mm Maximum bar diameter: 42 mm Spindle speed: max. 5,000 rpm Spindle bearing diameter: 85 mm Power: 7.5 kW Tailstock / Turret Boring bar holder: 25 mm Travel X-axis: 162.5 mm Travel Z-axis: 450 mm Travel Y-axis: ±30 mm Travel A-axis: 475 mm Rapid traverse X-axis: 18 m/min Hfedsxz Audspfx Ab Usr Rapid traverse Z-axis: 24 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse A-axis: 30 m/min Driven tools Tool magazine positions: 12 Max. speed driven tools: 4,000 rpm Drilling capacity (diameter): 13 mm Milling capacity (diameter): 13 mm Tapping: M4 – M8 Number of tool magazine positions: 12 MACHINE DETAILS Control: FANUC 18i-TB Dimensions & Weight Dimensions (L × W × H): 2,950 × 2,015 × 2,000 mm Machine weight: 6,700 kg Axes: 8 Simultaneously controlled axes: 4 Operating hours Power on time: 51,408 h Operating time: 17,832 h Piece counter: 670,941 pcs EQUIPMENT 2 turrets Sub-spindle Bar feeder IEMCA BOSS 545E Chip conveyor 5 driven tools 9 standard tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 83261, controller model: HACO BC59T Graphics, bending force (max.): 250 t, working width: 4,300 mm, distance between stands: 3,800 mm, TECHNICAL DETAILS Pressing force: 250 t Max. working width: 4,300 mm Distance between uprights: 3,800 mm Backgauge depth: 1,000 mm Number of axes: 6 (Y1, Y2, X, R, Z1, Z2) Crowning system: CNC-controlled Hfedpfxex Ahkts Ab Usr Punch holder: Quick-release MACHINE DETAILS Control unit: HACO BC59T Graphics Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,300 x 2,900 mm Weight: 18,700 kg Transport packages: 1 pc. EQUIPMENT Finger protection CE marking

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar Hedpfjx A A S Esx Ab Ujfr MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: Beckhoff, sheet thickness (max.): 32 mm, TECHNICAL DETAILS Travel range X: 3,000 mm Travel range Y: 1,500 mm Max. sheet thickness: 32 mm Resonator type: Hypertherm Powermax 105 MACHINE DETAILS Control type: Beckhoff Hfedpfxjx Ahiio Ab Uer Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Net weight: 3,000 kg Power: 16.8 kW Transport packages: 1 EQUIPMENT Various accessories Spare parts Documentation available CE marking

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Hodpfsx A A E Ejx Ab Ujfr Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18421, total length: 5,370 mm, total height: 1,600 mm, total width: 1,020 mm, Equipment: CE marking, MACHINE DETAILS Hsdpfox Ahhfox Ab Uefr Dimensions (L x W x H): 5,370 mm x 1,020 mm x 1,600 mm (l x w x h) Transport packages: 1 unit EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Hfsdpox A A Akjfx Ab Ujr Operating hours: 49,462 h EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, TECHNICAL DETAILS Number of milling spindles: 1 pc. Number of controlled axes: 5 pcs. Type of milling table: Beam table MACHINE DETAILS Weight: 3,450 kg EQUIPMENT Documentation Hfjdpex Ahgusfx Ab Ujr CE marking

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X66609, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum/maximum mold height: 300 - 900 mm Maximum opening stroke: 1,840 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection unit Screw diameter: 84 mm Shot volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 25,400 kg Injection unit weight: 7,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Hsdpfx Abex A Awzj Uefr Core pull (1 pcs.)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150610, brushing unit diameter: 180 mm, overall weight: 3,000 kg, workpiece height (max.): 100 mm, roller diameter: 400 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical connection: 380 V, 20 A Dimensions (L x W x H): 5,600 mm x 2,400 mm x 2,100 mm Weight: approx. 3,000 kg Table size: 1,350 mm x 3,200 mm Maximum workpiece height: < 100 mm Polishing roller diameter: 400 mm Feed speed: frequency-controlled MACHINE DETAILS Serial number: 150.610 Number of units: 7 Brush length, unit 1: 1,500 mm Brush diameter, unit 1: 180 mm Infeed table length: 5,150 mm Outfeed table length: 5,150 mm Hfodpfx Asx Ahd Tjb Uer EQUIPMENT Polishing unit with oscillating polishing roller Quick-change system for polishing rings Workpiece clamping with quick-release system Heavy-duty welded precision worktable SEW electric motors with energy efficiency class EFF1 (IE2) Optional vacuum clamping system available

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Hfjdpfx Abex A At Ns Uer Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Shot volume: 4,010 cm³ Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 44,500 kg Hsdpfx Absx A Ar Ee Uefr Injection unit weight: 12,500 kg EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot