Lathe-conventional-electronic

VDF BOEHRINGER NG 200-6

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control Djdpstvf Htsfx Anzekr - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: good (used), Parts shown by hand not come. Dodsyb R Erepfx Anzekr

Condition: reconditioned (used), Year of construction: 2007, Self-learning lathe, 230x1000; refurbished machine with general inspection and adjustment, and replacement of screws and bearings on the Z-axis and bearings on the X-axis. Bar passage: 58mm CNC: FAGOR 8055 Year of manufacture: 2007 Complete with: Self-centering chuck Chip conveyor Dkodpjv Nqulefx Anzjr Manual tool turret with CAPTO C4 interface Toolholder set Collet set Manuals and CE certificate

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg Dodpfxexyaf Rs Anzekr spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Year of construction: 1988, condition: ready for operation (used), Interface: RS232C, connected load: 21kVA, control system: Okuma OSP 5000 L-G, length: 2900mm, width: 1800mm, height: 1720mm, weight: 4.5t, ball screw of the X-axis has 0.2mm backlash, regularly maintained, with chip conveyor. An on-site inspection is possible. Dkedpfx Anjy U Nq Uezer

Condition: excellent (used), Fagor 8055 set Dksdpfxjxrtc Tj Anzor

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 1,830 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, We offer this used WAGNER WM 2000 milling machine, year of manufacture 1991. Dkjdpfx Ansyub Scozsr Model: WM 2000 Machine serial no.: 9109330 Year of manufacture: 1991 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, Control: Okuma OSP5000L Machine type: Twin Turret CNC Lathe Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Turning diameter over bed: 450 mm Turning diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Dksdpfx Anoy T Hawozor Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm

Condition: good (used), Year of construction: 2007, CNC lathe MICROTURN CHALLENGER BNC 1840, year 2007. Control: FARGO 8055i/A, tool turret VDI 40 / 8 positions, chuck diameter 250 mm. Spindle mount: CAMLOCK D1-6. Center height: 230 mm. Turning length: 1000 mm. Spindle bore: 65 mm. Spindle speeds: 100–4500 rpm. Further data available in the data sheets. Coolant system installed. The machine is in good condition and can be demonstrated under power. Machine documentation available. Accessories: tool holders, jaws for the chuck. Dksdpfxsyhzg Ds Anzsr

Year of construction: 1966, condition: not inspected (used), Rough SM fine drilling mill, drilling mill -WKG 385- Offered here is fine boring mill of the company Grob. Technical data: Manufacturer: Grob Type: SM Djdpfx Ashg Nxxonzekr Year of manufacture: 1966 spindle throat max.: 450mm spindle speed min.: 205 rpm spindle speed max.: 610 rpm number of spindles: 2 pieces table length: 300mm table width: 550mm distance table to spindle: 750mm feed: hydraulic