Used machining centers (vertical) X-axis travel 700-799mm for sale (206)

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 750 mm, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis CHIRON FZ 18 S LEAN was manufactured in 2003. It has a weight of 6000 kg and operates at a power rating of 29 kVA. The machine is designed for high-quality vertical machining capabilities. Consider the opportunity to buy this CHIRON FZ 18 S LEAN vertical machining centre. Contact us for further details. Blodpj Afppysfx Adhep 40 units available (2003 & 2004)Manufactured in Germany

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L X-axis: 1050 mm Y-axis: 560 mm Z-axis: 460 mm Table size: 1300 x 560 mm Number of tool pockets: 32 Spindle taper: BT50 Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Machine weight: 8,000 kg. Blodpfxexlta Ej Adhjp

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine parameters: Swing over bed: 406 mm Max. turning length: 1219 mm Description: Bsdpfxoz S Hy Re Adholp The machine is in good technical condition, and a test run is possible upon prior agreement. Haas CNC control. Max. turning diameter 406 mm / 16". Max. turning length 1,219 mm / 48". Distance between centers 1,219 mm / 48". Swing over cross slide / carriage approx. 282 mm / 11.1". X-axis travel 203 mm / 8". Z-axis travel 1,219 mm / 48". Spindle A2-6. Spindle bore 76.2 mm / 3.00". Spindle speed 0–2,000 rpm. Spindle power 12 HP / approx. 8.9 kW. Torque approx. 203 Nm at 150 rpm. Chuck usually 10" / 254 mm. Tailstock manual, depending on configuration. Weight approx. 2,087 kg. Machine dimensions approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A depending on configuration.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 5,500 W, number of axes: 4, Vertical machining centre manufactured in 1997. This DONAU Danumeric 440 features a drilling capacity of 40 mm in solid steel and 50 mm in cast iron. It offers a spindle speed range of 15 – 2,800 rpm and a quill travel of 200 mm. The standard work table dimensions are 600 x 1,200 mm. If you are looking to get high-quality machining capabilities, consider the DONAU Danumeric 440 machine we have for sale. Contact us for further details. - Drilling Capacity in Solid Steel (St 60): 40 mm dia.- Drilling Capacity in Cast Iron (GG 22): 50 mm dia.- Tapping Capacity (Steel St 60): M 36- Tapping Capacity (Cast Iron GG 22): M 45- Tool Taper: SK 40 (DIN 69871, Form A)- Spindle Speed Range: 15 – 2,800 rpm (infinitely variable)- Spindle Motor (AC, frequency-controlled): 5.5 kW- Spindle Torque: max. 250 Nm (constant from 15 to 200 rpm)- Gearbox: 2-step automatically shifting (i_max 1:7)- Quill Feed (Z-Axis): 5 – 2,000 mm/min (infinitely variable)- Quill Travel / Stroke (Z-Axis): 200 mm- Quill Feed Force / Pressure: 12,000 N- Column Elevation / Hub (W-Axis): 410 mm- Column Diameter: 195 mm- Radial Arm Travel: 750 mm- Drilling Radius: min. 540 mm / max. 1,290 mm- Standard Work Table Dimensions: 600 x 1,200 mm (with 4 T-slots 18 mm, pitch 125 mm)- Table Height: 900 mm- Distance Spindle Nose to Table: 95 – 705 mm- Distance Spindle Nose to Floor: 995 – 1,605 mm- Maximum Workpiece Dimensions: L 2,950 mm x W 1,050 mm x H 1,350 mm- Rapid Traverse (X / Y Axis): 7.5 m/min- Rapid Traverse (Z-Axis): 5.0 m/min- Rapid Traverse (W-Axis): 3.0 m/min- Positioning Accuracy (X, Y): ± 0.075 mm- Repeatability (X, Y): ± 0.030 mm- Positioning Accuracy (Z, W): ± 0.05 mm- Repeatability (Z, W): ± 0.03 mm- Control System: 32-Bit CPU CNC Control (4 axes: X, Y, Z, W)- Screen: 9" Electroluminescent Display (EL, illuminated)- Program Memory: 2,000 NC blocks- Interfaces: V.24 / RS-232-C- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 13.0 kVA- Machine Weight: approx. 2,610 kg (with 600 x 1,200 mm table) Technical Specification Taper Size SK 40 Bledpfx Ade Agm Iaehep

Condition: new, Year of construction: 2026, functionality: fully functional, Our internationally recognized, high-quality machining centers feature the following key characteristics: • German-engineered design • Manufactured in strict compliance with CE standards • Major components sourced from Taiwan, Germany, and Japan • Siemens 828D CNC control • X-axis travel from 450 mm to 1800 mm • Spindle speed: 8,000–30,000 rpm • 12T–24T arm-type tool changer • High speed • Exceptional precision • Long service life • Easy and convenient operation • Low noise level • Affordable price WORKTABLE: Table size 900 x 400 mm Table load capacity 300 kg T-slot dimensions 3/14/100 mm AXES, TABLE: X-axis travel 720 mm Y-axis travel 450 mm Z-axis travel 470 mm SPINDLE: Distance from spindle nose to table 120–590 mm Distance from column to spindle center 440 mm Spindle taper BT 40 / ϕ120 Spindle speed (standard) 100–12,000 RPM Spindle motor 7.5 kW AUTOMATIC TOOL CHANGER: ATC type: Arm-type, 20-tool capacity Max. tool diameter / with adjacent pocket empty 80 mm / 150 mm Max. tool length 200 mm Max. tool weight 8 kg Tool change time 1.8 s MOTION: Bljdpj Ahrbgjfx Adhep X/Y, Z rapid traverse 36/36/30 m/min Max. machining feed rate 10 m/min Ball screw diameter/pitch 32/16 mm Positioning accuracy +/- 0.005 mm Repeatability +/- 0.003 mm GENERAL: Installation dimensions 2220 x 2200 x 2160 mm Machine weight 3200 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Bodpfx Aoz Dh Edodhelp Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Bsdpjy T Ekbofx Adhslp Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Bljdpfxjzwvqke Adhjp Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, Bljdpfx Askticxedhsp table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 730 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DMG DMU60 Monoblock was manufactured in 2014. It features a Heidenhain iTNC 530 control unit, ensuring precision and reliability. The machine operates at a voltage of 400 V and has a power rating of 41 kVA. If you are looking to get high-quality machining capabilities, consider the DMG DMU60 Monoblock vertical machining centre we have for sale. Contact us for further details. Bledpfxsz Hk T Ns Adhjp - Voltage: 400 V- Control Voltage: 24 V- Frequency: 50 Hz- Power / Apparent Power: 41 kVA- Max Current: 63 A- Additional Accessories: Standard items such as tools and holders, no specific special accessories included.

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Bodpsu A Dnpefx Adholp Machine weight 4800kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System Bodpfxs Acmlys Adhelp For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: good (used), Year of construction: 2012, 3-axis machining center SPINNER VC 750, CNC Siemens 840D, year of manufacture 2012, serial number BV0446, chip conveyor. Blodpfx Ajz R R Dxjdhep

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description: Bodpfxjz S H Afs Adholp The machine is in good technical condition, and can be tested upon prior arrangement. It features a Haas CNC control system, often a 32-bit version for this model year. Travel distances for X/Y/Z axes are 1016 × 406 × 406 mm, or 40" × 16" × 16" in inches. Table dimensions are 1467 × 267 mm / 57.75" × 10.5". Spindle taper is CAT/CT 40 or BT 40. Spindle speed ranges from 0–4000 rpm. Spindle power is 5.6 kW / 7.5 HP. The spindle drive is belt-driven. Maximum torque is approximately 45 Nm at 1200 rpm. Distance from the spindle nose to the table is 102–508 mm / 4"–20". Rapid traverse rates for X/Y/Z axes are 5.1 m/min / 200 ipm. Maximum cutting feed rate is 5.1 m/min. There are 3 T-slots, each approximately 16 mm wide.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg Bedpfxjz Hmn No Adholp • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 31i – Model B, total height: 2,400 mm, total width: 1,900 mm, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, tool weight: 23,000 g, product length (max.): 2,115 mm, number of axes: 4, This 4-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details. Travels and speeds • Rapid traverse (X/Y/Z): 48 m/min • Feed rate (X/Y/Z): 1–15,000 mm/min • Interference radius: 380 mm • Spindle nose to table: 350–680 mm • Configuration: 4 axes • B-axis: 0–360°Table • Clamping area: 850 × 410 mm • T-slots: 3 • T-slot width: 14H14 mm • T-slot spacing: 125 / 250 mm • Table height from floor: 815 mm • Max. workpiece weight: 250 kgSpindle • Spindle bearing diameter: 50 mm • Max. torque: 35 Nm (100% duty)Tool magazine • Stations: 21 • Max. tool diameter: 80 mm • Max. tool length: 200 mm • Tool clamping force: 2,200 N • Max. tool weight: 2 kg/tool • Total tool mass: 23 kgCutting capacity • Max. metal removal rate: 600 cm³ • Max. drilling diameter: 20 mm • Max. tapping: M16Feed forces • X-axis: 2,700 N • Y-axis: 2,700 N • Z-axis: 5,400 NElectrical • Voltage/Frequency: 400 V / 50 Hz • Connected load: 22 kVA • Power requirement: 17.6 kWUnits available and runtimes • Unit 1 • FANUC S/N: P182ZL013 • STAMA S/N: KMM 021.1705 • Runtime: 400 h 20 min 5 sec • Unit 2 • FANUC S/N: P1827L014 Bledpsz E Sthjfx Adhsp • STAMA S/N: KMM 021.1704 • Runtime: 29,444 h 47 min 12 sec Additional equipment • KNOLL KF 200/950 cooling unit • Unit 1 S/N: 1347674 • Unit 2 S/N: 1347675 • KNOLL 300 K-1 chip conveyor • Unit 1 S/N: 1347673 • Unit 2 S/N: 1347676 Technical Specification Taper Size SK 30

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 750 mm, controller manufacturer: SIEMENS, controller model: SLIMline, overall weight: 7,800 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details. Blsdpoz A Urnsfx Adhop - Axis Travel: Standard ecoMill 70 specifications typically feature X = 750 mm, Y = 600 mm, Z = 520 mm- Maximum Spindle Speed: 12,000 max. 1/min (rpm)- Machine Weight: 7,800 kg- Apparent Power: 35 kVA- Maximum Current (In max): 55 A- Maximum Current (A max): 23 A- Short-Circuit Current: 63 A- Breaking Capacity: 0.6 kA- Operating Voltage: 400 V ±10% / 440 Vm- Auxiliary Voltage: 230 V ~ / 24 V =- Frequency: 50 Hz- Table Type: Integrated NC Swivel Rotary Table- Additional Equipment: External Chip Conveyor, Coolant / Filtration Tank Unit

Condition: good (used), Year of construction: 2016, Description: Bedpjztx Spjfx Adholp The machine is in good technical condition and can be tested upon prior agreement. It includes all equipment and, if applicable, accessories (holders, tools, etc.).

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 037611, Equipment: chip conveyor, documentation/manual, Offering a used Wemas Turn 400 in very good condition. Bodpfx Ajzav H Ejdhslp

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Bledpsxzqq Tefx Adhep Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: excellent (used), For sale: a robust WEMAS column milling machine, model FM23. Cast iron construction, very rigid, ideal for tool rooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital position readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant with a separate tank and pump. Vertical spindle with a precision collet and adjustable feed. Power supply: 3×400 V. The machine is complete, has undergone a recent inspection, runs smoothly, and is ready for testing under power. It shows normal signs of use – without any disqualifying play or looseness. Included in the price: 3-axis DRO display, scales on the X/Y/Z axes, coolant tank and pump, hoses, power cable, work light. Additional information from the photos: “WEMAS” and “FM23” nameplates, spindle setting correction plate, DRO panel with mm/inch functions, ABS/INC, calculator. Working parameters, spindle taper, and speed ranges to be confirmed on-site – I can measure the table and X/Y/Z travels. Loading with a forklift is possible. I can assist with organizing transport. Bjdpfxoz Slaqj Adhjlp

Condition: used, Year of construction: 2019, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg Bedpfx Ajz I T Rtjdholp rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2019 / Commissioning May 2020 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: excellent (used), Year of construction: 2011, Winmax control Bodpe Adl Rdefx Adhelp Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Bedpewzzrkefx Adhelp

Condition: used, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table load: 1,300 kg, rotational speed (max.): 10,000 rpm, CNC milling machine Hurco VMX 50 | Year of manufacture: 2006 | SK40 | Chip conveyor | Spare parts For sale is a Hurco VMX 50 CNC milling machine / CNC machining center, manufactured in 2006, from our machine inventory. The machine is in a well-maintained and good condition. It is ideally suited for workshops, job shops, as well as training and production companies. Technical data: - Manufacturer: Hurco - Model: VMX 50 - Year of manufacture: 2006 - Control: Hurco Ultimax - Travels X / Y / Z: 1,270 / 660 / 610 mm - Table size: 1,500 × 660 mm - Table load: approx. 1,300 kg Blodpfxsz Iri Io Adhsp - Tool holder: SK40 - Spindle speed: up to 10,000 rpm, depending on the model - Rapid traverse X / Y / Z: 30 / 30 / 20 m/min - Tool changer: 20-position - Internal coolant system: included - Coolant system: included - Chip conveyor: included Equipment: - Chip conveyor included - Various spare parts included - LAN-capable via existing WR box - Coolant system included Sale & Handling The machine is sold ex works. Pickup only. Inspection and demonstration under power are possible upon request. Loading can be arranged after consultation. Price: net plus statutory VAT. If you are interested, have any questions, or would like to arrange an inspection, please contact us.