Used machining centers (vertical) X-axis travel 700-799mm for sale (211)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 368 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: HEIDENHAIN TNC 410, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 950 × 520 mm Table load capacity: max. 455 kg Distance, spindle nose to table (min.): 127 / 227 mm Distance, spindle nose to table (max.): 637 / 737 mm Tool clamping system: DIN 69871-1986 / ISO 7388-1 / ANSI B5.50 Spindle taper: ISO 40 Spindle speed: 60–8,000 rpm Spindle motor power: 9 / 11 kW (depending on the operating mode) Speed programming: 1 rpm per step Rapid traverse rate, X-/Y-/Z-axis: 16 / 24 m/min Feed force, X-/Y-axis: 2 / 2.5 kN Feed force, Z-axis: 7 / 6 kN Positioning accuracy, X-/Y-axis: 0.003 mm Positioning accuracy, Z-axis: 0.004 mm Repeatability: 0.001 mm Tool magazine capacity: 21 tool positions Tool selection: Bidirectional drum rotation Tool weight incl. holder: max. 6.8 kg Maximum drum load: max. 68 kg Tool length: max. 385 / 305 mm Tool diameter with free neighboring positions: max. 80 mm Tool diameter with occupied neighboring positions: max. 160 mm Tool change time (chip to chip): 8.0 / 7.0 s MACHINE DETAILS Control system: HEIDENHAIN TNC 410 Operating hours Control system switched on: 1,209 h Spindle operating hours: 368 h EQUIPMENT Spindle drive with AC motor Fedpfx Aaj Agu Spenopp

Condition: used, Year of construction: 2007, 2007 Hurco VM3 CNC Vertical Machining Centre With Hurco Max Control Table Dimensions 1,321 x 457mm (3 'T' Slots). Maximum Table Load 545kg. Axis Travel 'X'=1,270mm, 'Y'=457mm, 'Z'=457mm. Min/Max Height From Spindle Nose To Table 101-736mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=19m/min. 20 Position ATC. Maximum Spindle Speed 8,000rpm (15kW Motor). Spindle Nose ISO 40. S/No. H-V30139 (2007). Fpsdpo Ad Efnsfx Aanop With Coolant System, Auger Conveyor, Filtermist FX5002 Oil Mist Extractor, Air Gun, Wash Gun, Signal Tower, Work Lamps & 4th Axis Enabled. Overall Dimensions L2,830 x W2,770 x H2,576mm. Weight 4,245kg.

Condition: excellent (used), Year of construction: 2022, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Fodpfxo Ai Sbme Aanjpp Spindle Motor 22Kw, HAAS Control, 30 Station ATC, Coolant, Low Volt light, swarf auger, spindle probe,

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, High speed machining enabled Fedpfox Uznfex Aanepp Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: excellent (used), Year of construction: 2007, Haas TM 2 TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. Fpodpfoyftdfsx Aansp The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Fpjdpfx As Ah Hbcoansp Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM Fodpfxjz Ehxyo Aanjpp WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Fpjdpfx Aoz Sqqmsanep Through spindle coolant, Tool Setter, Programmable coolant,

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger Fpjdpfx Aezz Ndrsanop High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Fpsdpfx Asydil Neansp Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: used, Year of construction: 2006, MAKE DAEWOO DOOSAN, MADE IN KOREA MODEL MYNX SERIES NM 410 YEAR 2006 CONTROL FANUC 0iMC TABLE SIZE 920.0 x 430.0mm TRAVERSES (X, Y, Z axes) 762.0 x 410.0 x 510.0mm SPINDLE SPEED Upto 8,000rpm SPINDLE SIZE BT 40 ATC 20 stations Fpodpfxo Ah Td So Aanop SPINDLE POWER 11.0Kw/15.0HP MAX. TABLE LOAD 600.0kgs MACHINE DIMENSIONS 2200.0 x 2600.0 x 2600.0 mm MACHINE WEIGHT 5000kgs PLUS SIDE ARM TOOL CHANGER COOLANT SYSTEM SET OF MANUALS

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Fpedpfx Aoz Ha Ayoanjp Spindle taper DIN40, 30 ATC, Coolant, Low volt light, Swarf Conveyor

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, Fjdpfjz R Rbdex Aanspp 24 station ATC.

Condition: like new (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, Control: HAAS Table size: Ø 400 mm Max. table load: 227 kg X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm B-axis: +120° to -35° C-axis (Rotation): 360° Spindle taper: SK 40 / Inline direct drive Spindle speed: 10,000 rpm Drive power: 22.4 kW Tool capacity: 30+1 tools Tool holder type: SK40 Machine weight: approx. 5150 kg Dimensions (W x D x H): approx. 2950 x 3000 x 2700 mm Accessories, Equipment • Coolant system • Chip conveyor • Through-spindle coolant (TSC), 20 bar • RENISHAW OMP60 optical part-setting probe Fpjdpfxs Ai E E De Aanop • RENISHAW TS27 tool setter • Documentation The machine is in near-mint condition and has barely been used. Under power in Hungary. Would you like me to adapt this translation into a professional sales listing format or modify any specific industry terms for an online machinery marketplace? Az AI-válaszokban előfordulhatnak hibák. További információ

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, Fpodpfx Ajz Rz Nqsanjp swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2022, operating hours: 1,173 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Haas VF-2SSYT + TRT160 + URC-12 Fanuc robot cell Fpodpfx Aae Aiii Tjnop SMTC-30-40T-HS | WIPS-R | CT | 12K-40T-IN | AUGER NGC | 1GB | ETHERNET | WIFI | EPFDM | HAAS CONNECT | TOUCH SCREEN 4AXD | 5AXD | DWO/TCPC 55GAL | VARIABLE FLOW CLNT | P-COOL | TSC1K | ACF CHIP STRAINER | OIL-SKIMMER | COOLANT REFILL | MIST CONDENSER HSM

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1112519, MACHINE SPECIFICATION Table size 914mm x 356mm X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102 -610mm Spindle BT 40 Spindle speeds 0-12000rpm Spindle motor 22.44kW Rapid feed rate 35.6m/min Toolchanger capacity 24 + 1 tools Approximate weight 3800Kg MACHINE EQUIPPED WITH: - Haas CNC control Wireless intuitive probing system Swarf auger Coolant system Lighting Fpjdpfx Aas Ahw Rzenep Guarding

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,676 h, functionality: fully functional, HURCO VMX 30 – CNC Vertical Machining Center with LEHMANN Dividing Table Manufacturer: HURCO Model: VMX 30 Year of Manufacture: 03/2002 Control System: HURCO Ultimax Machine Type: CNC Vertical Machining Center Technical Data X-axis: 760 mm Y-axis: 510 mm Z-axis: 610 mm Rapid Traverse X/Y/Z: 30/30/20 m/min Table Dimensions: 1,020 × 510 mm T-slots: 5 × 18 mm T-slot spacing: 100 mm Maximum Table Load: approx. 1,000 kg Fpsdpfx Aj Agwx Noanep Spindle Speed: up to 10,000 rpm Spindle Drive Power: approx. 11 kW Tool Holder: SK40 Automatic Tool Changer 24 tool positions Tool holder SK40 HURCO Ultimax Dual-screen control system Special equipment CNC-controlled dividing table from LEHMANN Fully integrated into the HURCO control system Control directly via the CNC control system Fully functional Machine Dimensions and Weight Machine Weight: approx. 4,700 kg Machine Height: approx. 2,775 mm Footprint: approx. 3,870 × 4,170 mm including work area Condition and Scope of Delivery The machine is in used condition, commensurate with its year of manufacture, and shows visible signs of wear. Technically, the machine is fully functional. All existing machine functions, as well as the integrated LEHMANN dividing table, are functioning perfectly. The machine is sold including the LEHMANN dividing table. Not included in the scope of delivery: The clamping devices and clamping elements visible in the pictures Tools and tool holders The machine is suitable for single-part production as well as for small and medium-sized series. The machine can be viewed by appointment. The machine is expected to remain powered and available for demonstration until mid-calendar week 46/2026 (approx. November 11, 2026). An inspection and functional test while powered is possible within this period by arrangement. All technical specifications are without guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 2023, operating hours: 2,889 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, overall weight: 3,600 kg, HAAS VF-2 – CNC Vertical Machining Center, Year of Manufacture 2023 Fpjdpj Ah Sptofx Aanep Well-maintained 3-axis CNC machining center from a lease return, with only approximately 539 spindle hours. The machine is in near-new condition and is available immediately. Technical Data: - Control: HAAS Next Generation Control - Travels X/Y/Z: 762 / 406 / 508 mm - Table size: 914 × 356 mm - Spindle speed: 8,100 rpm - Spindle power: 22.4 kW - Spindle drive: Inline direct drive - Tool holder: 40 taper - Automatic tool changer - Program memory: 1 GB - Coolant tank: 208 liters - Coolant pump: 0.75 kW - Power connection: 380–480 V - Spindle hours: approx. 539 h - Cycle time: approx. 624 h Special equipment: - Spiral chip conveyor - Preparation for through-spindle coolant (TSC Ready) - Mobile hand-held device RJH-XL with touchscreen - Manual spindle orientation Location: Baden-Württemberg, Germany Availability: Immediate

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,440 h, travel distance X-axis: 760 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table width: 900 mm, table length: 410 mm, table load: 350 kg, overall weight: 3,020 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 16, number of axes: 3, This 3-axis Micromill Challenger MM-430 was manufactured in 2012. It features a travel range of 760 mm in the X-axis, 430 mm in the Y-axis, and 390 mm in the Z-axis. The machine is equipped with a 16-station tool changer and a maximum spindle speed of 8,000 RPM. If you are looking to get high-quality machining capabilities, consider the Micromill Challenger MM-430 vertical machining centre we have for sale. Contact us for further details. Fsdpfx Ae Ai Scceanopp - Control Unit: Heidenhain TNC 620 (NC-Software 340561 03 SP2, NC Core 597110 05, PLC Software Buffalo_D03)- Operating Hours (Spindle): approx. 3,440 h (exact screen readout: 3439:44:56 h)- Operating Hours (Program Run): approx. 5,310 h (exact screen readout: 5308:21:15 h)- Operating Hours (Machine On): approx. 21,540 h (exact screen readout: 21535:12:59 h)- Operating Hours (Control On): 22349:11:05 h- Travel X-Axis: approx. 760 mm- Travel Y-Axis: approx. 430 mm- Travel Z-Axis: approx. 390 mm- Table Size: approx. 900 x 410 mm- Max. Table Load: 350 kg- Spindle Taper: SK 40- Max. Spindle Speed: 8,000 RPM- Tool Changer: 16-station tool changer- Rapid Traverse: approx. 24 m/min- Included Equipment: Chip conveyor (Betake), coolant system, electronic handwheel- Electrical Connection: 400 V / 50 Hz, 20 kVA- Machine Weight: approx. 3,020 kg Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2006, operating hours: 671 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Fpjdpfx Aezxz Dfsanjp Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 Fpsdozzrmpopfx Aanep max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE - Year of manufacture: 2008 - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h Fpsdpo Afypkofx Aanjp - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2014, operating hours: 30,222 h, functionality: fully functional, machine/vehicle number: M542-16208B3KEDAS, total height: 3,240 mm, total length: 5,055 mm, table width: 660 mm, table length: 1,500 mm, overall weight: 8,880 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 101 mm, spindle motor power: 15 W, number of slots in tool magazine: 40, Equipment: documentation/manual, The machine is available at its current location; disassembly and decommissioning will be arranged upon request. Transportation is not included in the price. This 3-axis machine, model Hurco VMX 50i, was manufactured in 2014 and features a robust work table measuring 59 x 26 inches, as well as a maximum spindle speed of 12,000 rpm. It offers a tool capacity of 40 tools and a fast tool change time (ATC) of 2 seconds. Ideal for precise, high-performance machining with a maximum table load of 4,410 lbs. If you are looking for high-quality milling performance, you should consider the Hurco VMX 50i that we have for sale. Contact us for more information. Overview • Manufacturer: Hurco • Year: 2014 • Model: VMX 50i • Production hours: 30222 • Application type: Milling • Location: Germany • Machine type: Vertical machining center Technical specifications - Hurco VMX 50i Dimensions • Machine width: 5055 mm • Machine height: 3240 mm • Machine weight: 8880 kg Fsdpfx Aas Aid Uxjnopp Additional information • Tool magazine with 30 positions • Table size: 1500 x 660 mm • T-slots: 6 x 18 mm • Maximum table load: 2000 kg • Distance from spindle nose to table: 101 mm • Maximum spindle speed: 12,000 rpm • Spindle power (15 min/continuous operation): 15 kW / 11 kW at 720 rpm • Spindle torque (15 min/continuous operation): 198.9 Nm / 116.7 Nm at 720 rpm • Tool type: CAT 40 / Big Plus® • Tool capacity: 40 • Maximum tool diameter: 76 mm • Maximum tool length: 300 mm • Maximum tool weight: 7 kg • Tool change time (ATC): 2 sec. *There may be deviations between the specified data and the actual values.*

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Fedpfxsyx U Nwe Aanjpp