Used injection molding machines with a clamping force of 1000 - 4999 kN for sale (472)

Condition: good (used), Year of construction: 1998, M 09 – Netstal Synergy 900-230 Clamping force: 90 t Year of manufacture: 1999 Control system: SYCAP / DSP II Screw diameter: 40 mm Screw type: PMMA Min. mold height: 200 mm Max. mold height: 500 mm Bdodpfxszu R Ixs Al Usg Max. opening stroke: 350 mm Ejector stroke: 120 mm Tie-bar spacing (H): 410 mm Tie-bar spacing (V): 410 mm Platen size (W × H): 600 × 617 mm Needle shut-off: Yes Operating hours: 6,320,221 (absolute cycle counter)

Condition: excellent (used), Year of construction: 2006, _M 46_ _Engel VC 1050/220 HL_ Clamping force: 220 t Year of manufacture: 2006 Control system: CC 200 Bdjdjzu R H Uepfx Al Uog Screw diameter: 55 mm Screw type: POM Min. mold height: 300 mm Max. opening stroke: 750 mm Max. platen distance: 1,050 mm Ejector stroke: 180 mm Tie-bar spacing (H × V): 860 × 830 mm Platen size: 560 × 600 mm Quick clamp: Yes Core pull: 2× Needle shut-off: 2×

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Baujahr: 2006 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 70 mm Bjdezl Sfmopfx Al Uodg Max. Hubvolumen: 1.047 cm³ Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 27,000 kN, screw diameter: 60 mm, clearance between the columns: 630,570 mm, injection weight: 760 g, MACHINE IN PERFECT CONDITION, AVAILABLE FOR ANY INSPECTION. Bjdpfxozw D Eio Al Ujdg

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Bdsdpfxszqapdo Al Ueg Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Linear robot including peripherals and safety fencing available. Bodpfxszqagie Al Ujdg A used machine from a site closure is being sold. Sale excludes all warranty claims for defects. The machine has not been inspected but was operational until the end.

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Bedpfxozqabmj Al Uedg Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,000 h, clamping force: 1,250 kN, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,500 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details. • Screw diameter: 45.0 mm • Tie Bar spacing: 470 x 470 mm Bsdpfezk D Nuex Al Uedg • Shot volume: 275.0 cm3 • 6 heating zones • Hydraulic core • Interface: Euromap 12 robot interface • Outer length: 745 mm • Outer width: 770 mm

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm Bdodpfx Ajxzix Aol Usg • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen Bdedpfx Alezrikmo Ujg • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t Bdedpfxszvm A Ie Al Uog

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Bdjdpfx Alezvmx Nj Usg Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Bsdpezvmxpefx Al Uodg Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine Bodozvmpnspfx Al Usdg YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Bsdpfx Aozvgu Del Uedg Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Bodpfx Aezvdbujl Ujdg Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Bdsdpjzd U Diefx Al Ueg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Bodpfszl Tc Tox Al Uodg Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Bdedpfx Aomn Tu Hsl Uog

Condition: excellent (used), Year of construction: 2009, operating hours: 3,645 h, clamping force: 2,500 kN, screw diameter: 35 mm, Arburg 1500T 2500-400/400/290 3K injection molding machine (235) Number: 235 Availability: in stock Year of production: 2009 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35, 40 Closing force [kN]: 2500 Plate size [mm]: 1500 Working hours [h]: Bjdpfx Asw Hx Uyjl Uodg 3645 Weight [kg]: 11200

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Bodpfxezmrf No Al Uodg The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed.

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ SM ID: 300.30 Asset No.: A1998.016 Clamping force: 200 t Serial No.: 33813 Year of manufacture: 1998 Control system: CC 100 Screw diameter: 55 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Bdedpsztafdefx Al Uog Platen size: 500 × 570 mm Quick clamp: Yes

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ Clamping force: 200 t Year of manufacture: 1998 Control system: CC 100 Bjdsztadgspfx Al Ujdg Screw diameter: 45 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation

Condition: good (used), Year of construction: 2002, _Engel ES 750/200 HL_ Clamping force: 200 t Year of manufacture: 2002 Control system: CC 100 Screw diameter: 50 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Bdodpozr U Hmefx Al Ujg Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Needle shut-off: Yes Extras: Water battery extended for adapter plate

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA Bodpfx Aevkqfaol Uedg mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h