Used Machines with a clamping force of 1000 - 4999 kN for sale (459)

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Cgjb Hhu Howcm Awecst Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2013, Clamping force: 150 t Screw diameter: 45 mm Shot weight: 290 g Distance between tie bars V: 470 mm Distance between tie bars H: 520 mm Min mould dimension: 335×305 mm Shot volume: 319 cm3 Type: Horizontal Drive: Electric Cjb Hovx Um Dshu Hcjgt

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 22200 kg Clamping Unit Clamping force 3000 kN Distance between bars 1090 mm Mould height min 550 Additional Equipment ERC 33/2-F (Year: 2008) Only 1K, second unit was dismantled and scrapped by Engel Machine is tie-bar-less Handling was dismantled after the last production run and should be reassembled and commissioned by Engel or an expert When the clamping cylinder is fully retracted, the mold area between the two clamping platens is approx. 1,400 mm Dimensions of the measuring surface: a: 4.35 m b: 2.00 m c: 3.28 m / Dimensions of the right-hand cover parallelepiped: Length: 6.70 m Width: 2.00 m Height: 2.28 m Measuring distance: 1.00 m Oil temperature: 40,00 °C /Injection pressure: 21.00 bar/Holding pressure: 86.00 bar/Screw stroke: 130.00 mm/Opening stroke: 497.00 mm/V1, V2, V3: 100.00 %/Ejector P: - bar/Cooling time: 10.00 s/Cycle time: 24.82 s/Shot weight: 264.64 g/Material: HDPE/Injection mould Fa. / Injection mould: 0,00/Drive power: 37 KW This Engel Victory 2050H500V/300 Combi was manufactured in 2008. A hydraulic injection moulding machine, it represents a solid choice for those looking to enhance their production capabilities with a reliable and efficient model. Contact us for more information. Cgsb Hov T D Nwohu Hcst Application Types Injection Moulding

Condition: like new (used), Year of construction: 2009, operating hours: 49,500 h, Functionality: fully functional, machine/vehicle number: 172007, clamping force: 100 kN, screw diameter: 35 mm, Machine from clean room production. Cgeb Hhowcki Ieu Hcet

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Dimensions Weight: 15000 kg Cjb Hhuewcm H Ao Hcegt Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, ZHAFIR VE360II (2013) 360 tons Clamping force: 360 tons Distance between tie bars: 820 x 820 mm Mould height : 250-860 mm Ejector stroke: 160 mm Priemer šneku: 60 mm Injection volume: 792 cm3 Cob Hhsu Dm Hqsu Hcsgt Shot weight: 720 g Injection pressure: 210 bar

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4000 kg Clamping Unit Clamping force 1300 kN This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Cjb Hhev T D Rbeu Hcjgt Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Cjb Hhuowcm Nds Hcjgt Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2015, Engel Victory 330/180 tech (2015), duroplast, Engel VIPER 40 linear robot Clamping force: 180 t Screw diameter: 35 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Controll CC300 Cgeb Hhusvply No Hcot Engel Viper 40 Linear Robot Engel Rotofeeder BMC50 The machine 202463 has proportional valves for the cap, injection, ejector, 3 x cores and controlled 2 hydraulic servo pumps Machine was using DUROPLAST MATERIAL Approx 30.000 hours

Condition: ready for operation (used), Year of construction: 2017, operating hours: 21,445 h, Control Unit Brand FANUC Injection Unit Screw diameter 32 mm Clamping Unit Clamping force 1250 KN Opening stroke 350 mm Size of mold platens 660 mm × 610 mm Additional Equipment Equipment: Robot Wittman W818 (2015) 8000 € extra Cgeb Hhusvxbpxe Hcst This FANUC α-S100A was manufactured in 2017. It is an electrical injection moulding machine, ideal for precision plastic parts production. Consider the opportunity to buy this FANUC α-S100A electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, Arburg 420C 1000-290 with the sprue picker Geiger MiniServo 0.5 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm injection weight: 172 g Injection pressure: 1530 bar Metering volume: 188 ccm Clamping unit: clamping force: 100 t Cgsb Hjwcm Utshu Hcjt tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic control: SELOGICA - touch screen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Dimensions: Weight: 3740 kg Length/width/height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating power: 6,4 kW Total power: 21,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2013, Control: UNILOG B6 Closing force: 4500 KN Distance between columns: 950mm x 700mm Minimum height of mold assembly: 330mm Maximum height of mold assembly: 780mm Screw diameter: 65mm Proper injection pressure: 2070 bar Maximum injection weight: 980.9 g ServoElectric injection unit Servo Packaet S0 ServoPower package S1 (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo electric (Knodler) with jet actuator, injection speed 400 mm/s (servo injection control significantly reduces electricity costs and supports precise regulation injection process) Electric ejector with a force of 60 KN and a path of 180mm Additional equipment: 1\. Air valve 2\. Cooling water flow regulator 3\. Digital interface for the temperature regulator (possibility of controlling six thermoregulators simultaneously) 4\. Interface for controlling the needle cutting off the nozzle in the tool 5\. Interface for controlling the external Cgob Hhu Hou Hiwwecet hot runner regulator 6\. Full integration for the Wittmann W8xx series robot 7\. Button for quality control Language : Polish

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Cob Hhu Howcna Docjgt Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Csb Heu Ekbhehu Hcogt Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request.

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Cob Hjwcnbzehu Hcogt Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Arburg 520A 1300-170 Alldrive / Electric machine / Operating hours: 28,847 in automatic mode Year of manufacture: November 2007 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 cc Clamping unit: Clamping force: 130 t Csb Hjwcnclohu Hcegt Type distance: 520 x 520 mm Clamping platen size: 728 x 728 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Machine in very good technical condition Electric machine: high-speed, energy-saving, and very quiet Operating hours: 28,847 in automatic mode Euromap 67 Robot interface Hydraulic core pull x 1 Control system with hot runners x 12 Hardened bimetal injection unit Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Central lubrication Proportional valve on the injection unit for precise injection Built-in sorting flap Complete Priamus system for mold pressure control (available for an additional charge) Dimensions: Weight: 7100 kg Length/Width/Height: 3.98 x 1.88 x 2.11 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Csb Hhjwcnmkou Hcjgt Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, Arburg 820S 4000-2100 / Production line with the Arburg Multilift robot Year of manufacture: December 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Injection pressure: 2000 bar Dosing volume: 1078 cc Clamping unit: Clamping force: 400 t Type distance: 820 x 820 mm Clamping platen size: 1171 x 1171 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 4 Control system with hot runners x 12 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection The machine was regularly serviced in Germany Cebswcnnzs Hhu Hcegt Robot Arburg Multilift Year of manufacture: December 2010 5-axis robot: 3 axes are driven by servo motors (electric); B axis (rotation) Travel paths in axes: X-700, Y-1000, Z-2400 Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 20,150 kg Length/Width/Height: 7.49 x 2.32 x 2.86 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 200-750 CX with the Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit: Clamping force: 200 t Distance between tie bars: 560x560 mm Size of the clamping platens: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touch screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min. tool installation height - 350 mm Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners x 24 Hardened injection unit - bimetal Parallel movements Proportional valve on the injection unit - Precise injection Kistler sensor - mold pressure control Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 High-speed robot 5-axis robot: 3 axes are driven by servomotors (electric); axes B and C - pneumatic Touch control panel Robot with adapter, conveyor belt and protective housing Cgsb Hhu Howcmztecet Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 11500 kg Length/width/height: 5.32x1.98x2.06 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: Cjb Hhujwcm Duj Hcjgt clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Csb Hhewcm Rbou Hcjgt Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 110-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Csb Hhuewcm Elj Hcogt Dosing volume: 475 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Cob Hhu Hewcm N Recegt Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Cgsb Hewcngkjhu Hcjt Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Arburg 570S 2200-1300 / Production line with the Arburg Multilift robot Year of manufacture: 11.2010 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Injection pressure: 2000 bar Dosing volume: 664 cc Clamping unit: Clamping force: 220 t Bar spacing: 570x570 mm Clamping plate size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Cjb Hhjwcnmwsu Hcogt Control: SELOGICA - touch screen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 4 Control with hot runners x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The machine was regularly serviced in Germany Robot Arburg Multilift Year of manufacture: 11.2010 5-axis robot: 3 axes are driven by servo motors (electric); axis B (revolution), axis C - pneumatic Travel paths in axes: X-400, Y-800, Z-1800 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 10090 kg Length/width/height: 5.89x1.90x2.228 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request