Used injection molding machines with a clamping force of 5000 - 9999 kN for sale (87)

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Iaedpfx Adex Hx Ndodsl Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Isdpfxex Tfyie Addoal Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Only ABS and TPE have been processed so far. Isdpfx Asw D R N Roddsal The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale.

Condition: used, Year of construction: 2017, clamping force: 550 kN, displacement volume: 1,239 cm³, injection pressure: 1,990 bar, overall weight: 21,000 kg, load hours: 21,636 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) Iajdpfsx E A Tqox Addol delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2011, operating hours: 51,000 h, 1,0 St. gebr. Spritzgießmaschine Iedpfxjxyrc Ie Addoal Hersteller: KRAUSS MAFFEI Typ: KM300-2000CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC6 Ausstattung: 3 St. Kernzug Schnittstelle Roboter 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, General Data Measurements width 2500 mm Iasdpfx Adsx D E Dtodjl Measurements depth 8500 mm Measurements height 2500 mm Machine weight 20000 kg Injection Unit Screw diameter 40 mm Injection pressure 2400 bar Screw speed 300 r/min Adjustable heating zones 5 Nozzle pressure 68 kN Clamping Unit Clamping force 7000 kN Opening stroke 1250 mm Max open daylight 1700 mm Mould height min 450 mm Mould height max 1150 mm Ejector stroke 300 mm Ejector force for / back 180 kN This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: Iajdpoxcakrofx Addjl - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 7,500 kN, Equipment: documentation/manual, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) Iedpfxsx Iu U Ee Addoal • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: used, Year of construction: 2012, operating hours: 38,652 h, screw diameter: 70 mm, Machine equipped with an ARBURG MULTILIFT SELECT 15 robot. Machine in production, can be viewed in operation, Tunisia area. Tonnage 460 Theoretical Vol. (A) 1078 Mold thickness mm 500 - 900 Moving table stroke mm 1280 Column passage mm 920 x 920 Robot interface Euromap 67 Hydraulic jacks n. 2 PM Ijdpfx Asx S H T Ijddeal Electric charge No Control panel type SELOGICA Accumulators No Closure Knee brace Press Hydraulics Magnetic planes No Rotating table No

Condition: used, Year of construction: 2010, We will sell a STORK 900 injection molding machine, injection molding machine parameters below: Year of production: 2010 Installed power: 132KW Maximum injection speed: 400mm/s Maximum injection pressure: 1650bar Screw diameter: 98mm Maximum injection weight for PP: 3180g Closing force: 9000KN Clearance between columns: 1010x1010mm Minimum form height: 300mm Isdepmr H Iopfx Addoal Maximum table opening: 1190mm Maximum height of ejector pin: 700mm Diameter of centering pins: 250mm Maximum ejector stroke: 300mm Dimensions of mold mounting plates: 1570x1560mm Unit volume: 5857g Mouthpiece opening diameter: 8mm The machine is equipped with a Sytrama robot. The injection molding machine in good condition is still used in current production, it is possible to see it on site or send a video with an example of operation.

Condition: excellent (used), Year of construction: 2011, operating hours: 76,000 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900C2 Baujahr: 2005 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 754 cm³ Spritzteilgewicht: 679 g/PS Ijdpfx Adjxyq S Usdeal Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter Werkzeuginnendruckmessung 24- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 76.000 Betriebsstunden

Condition: excellent (used), Year of construction: 1999, Engel ES 7050/1000 K Clamping force: 1000 tons Year: 1999 Screw diameter: 105 mm Injection volume: 4160 cm³ Iasdpfjxvc Slsx Addjl Number of heating zones incl. nozzle: 7 Pump drive power: 130 kW Locking force: 1100 tons Opening stroke: 1100 mm Min-max mould height Tie bar spacing: 1400x1150 mm Machine weight: 64 tons + 18 tons Plus Engel Robot Type: ERC 83/2 - CL Year: 1999 Separate control cabinet

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Iajdpfx Adox Dbtwedol Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: like new (used), Year of construction: 2017, 1. Machine: ENGEL VICTORY 500T / 7050 (Year 2017) 2. 3. Year of manufacture: 2017 4. Control unit: CC300 5. Operating hours: 565 h 6. Availability: Immediate 7. 8. Clamping Unit: 9. Clamping force: 500 tons 10. Opening stroke: 1100 mm 11. Distance between tie bars: 1500 × 1285 mm 12. Platen size: 1500 × 1285 mm 13. Minimum mould height: 500 mm 14. Maximum daylight (open distance): 1600 mm 15. 16. Injection Unit: 17. Screw diameter: 120 mm 18. Screw length (L/D): 22 D 19. Injection volume: 5430 cm³ 20. Maximum injection pressure: 1600 bar Ijdpfx Ajxvingjddoal 21. 22. General Data: 23. Motor power: 98 kW 24. Heating power: 30 kW 25. Clamping unit weight: 31 tons 26. Injection unit weight: 15 tons 27. Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m 28. 29. Options: 30. Core pullers: 3 31. Robot interface: No 32. Bi-metallic screw/barrel: Yes 33. Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones 34. 35. Note: 36. The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Ijdpfsx Nr Uxox Addjal Injection Unit Screw diameter 90 mm Clamping Unit Clamping force 5000 kN This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2013, functionality: fully functional, Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Injection weight (PS): Iasdpjx Hibdjfx Addol Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X66609, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum/maximum mold height: 300 - 900 mm Maximum opening stroke: 1,840 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection unit Screw diameter: 84 mm Shot volume: 2,575 cm³ Shot weight (PS): 2,369 g Isdpfx Adsx A Awzodoal Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 25,400 kg Injection unit weight: 7,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pull (1 pcs.)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: X66932, clamping force: 6,600 kN, screw diameter: 98 mm, Used Stork IMM 6600-8650R injection molding machine. The machine still needs to be tested and repaired. Isdpfxjwhncie Addeal

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Clamping Unit Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding Ijdpfx Adjx Nr R Hodeal

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: X88628, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, The cylinder, screw, and screw tip of the injection system were replaced a year ago! TECHNICAL DETAILS Clamping Unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum mold height: 400 mm Iodsx A Avqspfx Addjal Maximum mold height: 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 29,300 kg Weight of injection unit: 7,700 kg EQUIPMENT Pneumatic valves (4 pcs) Cores: (1 pc)

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Iajdpfx Adjwhk Iujdel

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, General Data Machine weight 20000 kg Measurements height 2230 mm Dimensions Machine Length 8840 mm Injection Unit Screw diameter 80 mm Clamping Unit Iodpfx Aex Nr H Ijddeal Clamping force 5500 kN This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Iajdpox A At Nsfx Addjl Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Iodswhkfyepfx Addsal

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Iasdpfxjx A Ar Ee Addsl Screw diameter: 98 mm Shot volume: 4,010 cm³ Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 44,500 kg Injection unit weight: 12,500 kg EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot