Used Deephole boring machines for sale (75)

Condition: used, Year of construction: 1999, fabric-no. 23989 total power requirement 8,8 kW Fgjdpfx Aswzyt Hjg Noh weight of the machine ca. 9,1 t

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank -pump -Filter Fjdpjhuil Rjfx Ag Nsgh

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 00-1646/1, drilling depth: 700 mm, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,670 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, table load: 10,000 kg, travel distance W-axis: 440 mm, Equipment: chip conveyor, • Manufacturer Buck Maschinenbau GmbH !!! Special price 95,000 !!! Fgodpfx Asu Hzqcog Nsh • Machine number 00-1646/1 • Working area (mm): X 1,600, Y 1,200, Z 1,600 • W-axis 500 mm, B-axis, A-axis swivels 19° • Full machine enclosure • Chip conveyor and high-pressure coolant system • Tool holder SK50 • Heidenhain TNC 430 control • Table load capacity 10 tons workpiece weight • Spindle speed 4,000 RPM • Rapid traverse 20 m per minute • Tool changer for 20 tools • Machine can be inspected under power at any time by appointment

Condition: good (used), MEWAG - IXION TL 500 Deep Hole Drilling Machine Fedpfxswm Hclj Ag Negh - Drilling depth approx. 500 mm - Table size 800 x 450 mm - Support/drilling table rotatable and angle adjustable from 0 to 360 degrees - Manual drilling stroke - Drill chuck - Various deep hole drills - Connection cable Dimensions: L x W x H 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Subject to errors / mistakes

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Fodpfx Aowx E N Isg Njgh Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Fgsdpfx Asvvx Hiog Nsh Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 Fgjdpfsw Izr Ajx Ag Noh MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: ready for operation (used), Year of construction: 2017, Deep hole drilling machine Machine type: Samag TFZ 2L-1000 Fjdpfx Aow Ecfteg Nogh Control system: Year of manufacture: 2017 TECHNICAL DATA: Speed range: 6,000 rpm Drive power: 13 kW Maximum drilling diameter: 36 mm Maximum drilling depth: 1,250 mm Travels: X-axis: 1,600 mm Y-axis: 1,050 mm Z-axis: 1,100 mm Max. workpiece weight: 7,000 kg Max. workpiece length: 1,600 mm Milling & deep hole drilling Design with double ball screw drive Coolant system & filtration Tool package

Year of construction: 1986, condition: used, Bench drill, bench drill, column drill, pillar drill -Manufacturer: Flott, bench drill type TB 13 St -Clamping table: 225 x 295 mm -Spindle mount: with drill chuck -Projection: 185 mm -Speeds: 400-5000 rpm -Column: diameter 60 mm -Spindle stroke: 60 mm, depth stroke with fine adjustment -Motor power: 0.5 kW -Voltage: 220V -Dimensions: 380/225 / H745 mm Fgedpfx Ajg D H A Rjg Nsh -Weight: 50 kg

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Fgsdpfx Agjt Hwuco Njh Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Fgodev A Uw Djpfx Ag Neh Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 1,400 rpm, table length: 1,050 mm, table width: 1,050 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed: 50 – 3,000 rpm Centre height: 240 – 1,040 mm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm Feed rate series 2: 18 – 160 mm/min, 35 – 320 mm/min Rated motor speed: 233 – 2,100 / 465 – 4,200 rpm Fedpewvi Iiefx Ag Negh Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Rated motor power: 0.75 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW Overall length: 6,500 mm Overall width: 3,500 mm Overall height: 2,900 mm Weight: 8 t EQUIPMENT 3-axis digital readout by Heidenhain Including coolant unit

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Fedpfx Aow Elrvjg Nogh Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Travel distances: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Table size: 1,100 x 650 mm Max. table load: 2,000 kg Tool holder: HSK 63 Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Fgjdpfx Aswxaf Rsg Neh Coolant tank: 600 l Paper band filter

Condition: used, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: WMW Heckert, bench drill type BT 12/1 with base -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle mount: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm Fjdsir E Snepfx Ag Nogh -Column: diameter 92 mm -Spindle stroke: 100 mm -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm swing diameter mm Fodpfx Aget Hwvao Negh total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Fgedpfxovn Sv Uj Ag Neh Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Year of construction: 2003, condition: used, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm Fgedpfx Ask Tuwvsg Njh -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. Fgjdpfx Aot Hw Ayeg Neh " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: used, Bench drill, stand drill, pillar drill, column drill -Spindle holder drill chuck: 4 mm Fgodpfxed Nia Es Ag Neh -Clamping table: O 125 mm - Projection: 105 mm -Speeds: 1400 rpm -Pillars diameter: 41 mm -Spindle stroke: 55 mm -Motor power: 75W -Dimensions: 290/150/H530 mm -Weight: 13.4kg

Condition: used, Year of construction: 1990, core drilling diameter max. 6 mm Fgodpfxst Hw A Ts Ag Neh bore depth 350 mm swing diameter mm total power requirement 15 kW weight of the machine ca. 3500 kg dimensions of the machine ca. 5000 x 1200 x 2200 mm

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm Fgedpfx Agsmzkg Rj Njh -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Year of construction: 2000, condition: used, Bench drill, bench drill, column drill, pillar drill -Manufacturer: Ixion, bench drill type BT 6 -Clamping table: 290 x 225 mm -Travel: 150 mm -Spindle mount: drill chuck -Projection: 180 mm -Speeds: 1080 - 12000 rpm 8 levels -Column: diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Motor: AEG 0.37 / 0.6 kW -Voltage: 380V Fjdpfx Agsg Rplwe Nsgh -Dimensions: 640/330 / H740 mm -Weight: 92 kg

Condition: used, Bench drill, bench drill, column drill, pillar drill - Manufacturer: AEG, bench drill type DTBK-10 - Clamping table: 175 x 175 mm Fgsdpfxshfavqj Ag Neh -Spindle holder: drill chuck B16 -Projection: 200 mm - Column: diameter 60 mm -Spindle stroke: 70 mm -Motor: 0.25 kW / 2800 rpm -Voltage: 380V -Dimensions: 580/590 / H730 mm -Weight: 60 kg

Condition: good (used), Year of construction: 1956, Bench drill, bench drill, column drill, pillar drill - Recording: MK2 -Projection: 260 mm -Travel: 190 mm -Speeds: 435 - 4350 rpm - Column diameter: 80 mm Fgsdeflk Hmepfx Ag Noh -Spindle stroke: 70 mm -Motor power: 450 W -Base plate: sheet metal plate -Dimensions: 645/635 / H780 mm -Weight: 130 kg