Used eccentric presses single column over 100t for sale (138)

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm Godpfx Ajvb I Itsdbebi stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm Gbedpfx Ajugnpiedbsi no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: good (used), Year of construction: 1977, Offer 25021 Technical data approx.: Gbjdpfxovmx N Es Adbei - Pressure force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Hole in the table approx. 320 mm - Ram surface approx. 800 x 475 mm - Tenon hole in the ram mm - Ram adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Compressive force 100 t - Throat 320 mm Gsdpj E A Tmofx Adbebi - Width in the column below the guide 400 mm - table size approx. 850 x 610 mm - drop-through hole in the table 335 / 300 mm - thickness of the table clamping plate 90 mm - overall installation height approx. 300 mm - surface of the chair 600 x 335 mm - height adjustment of the chair 80 mm - stroke adjustment 10 - 130 mm - ejector stroke in the chair 32 mm - Stroke rate continuous operation approx. 56 /min - Drive 380 V / 11 kW - space requirement approx. W 1900 x H 2800 x D 2200 mm - weight approx. 9000 kg - with : - UVV press safety control unit PREVENTA - Hydr. + pneumatically operated clutch - LUTEX additional brake system - central lubrication

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 600 x 780tappet measurements: 240 x 400Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400PK100 Eccentric Press Capacity: 100 tons Strokes per minute: 50 spm (adjustable) Table size: 780 x 600 mm Ram size: 400 x 400 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Installation height: 400 mm Accessories: Control system: Siemens S7-1200 Display: Siemens 9’’ screen Stroke path adjustment Min & max stroke rate adjustment Automatic central lubrication Safety PLC: PILZ or SIEMENS Dual-channel safety control cabinet Light curtain: SICK, PILZ, or LEUZE, Cat 4 CE-compliant system Gbjdpfer I H Dgex Adboi 2 pcs. shear plates Bottom support plate for transport Under-grip protection Pneumatic clutch & brake combination

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Gbjdpoktm N Dsfx Adboi

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Gbodpfxev Hin Eo Adbji Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Gsdpfx Aetqwtdsdbsbi Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: good (used), Year of construction: 1984, Automatic Press Factory Warszawa-Włochy TYPE PXS 100 Eccentric Press, pressure 100 t Gbedjw Uaxzspfx Adbei Year of manufacture: 1984

Condition: good (used), Year of construction: 1974, pressing force: 100 t, Model: OB1 Pressing force: 100Tm Torque: 3500kg Plate thickness: 10mm Pusher slider: 5-159mm Distance between table and spindle/pusher: 530mm Max. spindle/pusher travel: 130mm Strokes per minute: 53 Gbodpfxjudwr Us Adbsi

Condition: good (used), Year of construction: 1988, functionality: fully functional, total height: 29,750 mm, table width: 1,120 mm, table length: 800 mm, stroke adjustment: 140 mm, total width: 13,500 mm, total length: 25,800 mm, overall weight: 12,800 kg, pressing force: 250 t, height adjustment type: mechanical, Equipment: documentation/manual, Eccentric press LE 250C. Year prod. 1988(ZTS - SLOVAKIA). Max. pressure 250ton. Stroke 30-140mm. Max. number of strokes per minute 45. Adjustment of the slider 110mm. Maximum distance of the slider from the table 450mm. Clamping area of the slider 800 x 475mm. Mounting area of the table 1120 x 800mm. Motor power 20kW. Overall dimensions (Height x Width x Length) 2975 x 1350 x 2580mm. Gbodpfxotq Eqxo Adbsi Weight 12800kg.

Condition: used, functionality: fully functional, ERFURT PRESS 250t Gbsdpfx Adjv Hqacjbei

Condition: good (used), Manufacturer: DIGÉP Godpfom Uc R Aox Adbobi Tip: SD 100

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Godpfx Ajt Ucpbodbjbi Inquire by phone or email!

Condition: new, Year of construction: 2025, ram adjustment: 120 mm, drop-through hole in table: 220 mm, table width: 720 mm, table length: 1,000 mm, stroke adjustment: 125 mm, pressing force: 150 t, Equipment: safety light barrier, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: IMMEDIATELY FROM STOCK GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Body and welded parts will be stress relieved by vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA Gedpfovyrywox Adbjbi o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 150 Tons Table-Ram Distance 500 Mm Distance Between Walls 1080 Mm Ram Adjustment 120 Mm Press Approximate Width 1400 Mm Press Approximate Depth 1900 Mm Press Approximate Height 3000 Mm Table Hole Diameter 220 Mm Table Size 720 / 1000 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 900 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 15 + 0.75 KW Motor Speed 1450 RPM Approximate Weight 12,000 Kg

Condition: new, Year of construction: 2025, ram adjustment: 100 mm, drop-through hole in table: 210 mm, table width: 700 mm, table length: 900 mm, pressing force: 125 t, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Gbjdpfjvxhqvox Adboi Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Condition: new, Year of construction: 2025, ram adjustment: 150 mm, drop-through hole in table: 260 mm, table width: 900 mm, table length: 1,200 mm, stroke adjustment: 200 mm, pressing force: 300 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 Gbjdovyr Eaopfx Adbji o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, ram adjustment: 130 mm, drop-through hole in table: 240 mm, table width: 800 mm, table length: 1,070 mm, stroke adjustment: 160 mm, pressing force: 200 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 200 Tons Table-Ram Distance 500 Mm Distance Between Walls 1150 Mm Ram Adjustment 130 Mm Press Approximate Width 1500 Mm Press Approximate Depth 2000 Mm Press Approximate Height 3200 Mm Table Hole Diameter 240 Mm Table Size 800 / 1070 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 950 Mm Gbsdpfx Adevyr Dioboi Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 18.5 + 0.75 KW Engine Speed 1450 RPM Approximate Weight 14,000 Kg

Condition: new, Year of construction: 2025, ram adjustment: 150 mm, drop-through hole in table: 240 mm, table width: 850 mm, table length: 1,150 mm, stroke adjustment: 160 mm, pressing force: 250 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR Gbjdpfevyr D Aex Adboi o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 250 Tons Table-Ram Distance 520 Mm Distance Between Walls 1230 Mm Ram Adjustment 150 Mm Press Approximate Width 1600 Mm Press Approximate Depth 2100 Mm Press Approximate Height 3400 Mm Table Hole Diameter 240 Mm Table Size 850 / 1150 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 22 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 16,000 Kg

Condition: new, Year of construction: 2025, ram adjustment: 85 mm, table height: 850 mm, drop-through hole in table: 200 mm, table width: 700 mm, table length: 880 mm, stroke adjustment: 110 mm, pressing force: 100 t, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy Gsdpfx Aevxhprodbobi o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg

Condition: used, Year of construction: 1990, ECCENTRIC PRESS GIZELIS 150t PRESSURE 150t Gedpfxex N Sr Dj Adbsbi TABLE DIMENSIONS 1000x660 mm STROKE 120-220 mm POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM

Condition: used, Year of construction: 1990, ECCENTRIC PRESS GIZELIS 200t PRESSURE 200t TABLE DIMENSIONS 1000x660 mm STROKE 17-230 mm POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM Gbsdpox N Sqysfx Adbji

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, stroke adjustment: 150 mm, pressing force: 300 t, stroke length: 200 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, utilizing force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key advantages Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with centralized automatic lubrication Production-ready operation with PLC control + two-hand/foot pedal control Areas of application Cold cutting and punching operations Cold forming applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-way guided slide system • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system Godpox N Nfhjfx Adbobi • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Ray barrier finger–hand protection safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies manufactured to required specifications • Eight-way guided slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Distance table–ram: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (stroke setting): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table bore diameter: Ø260 mm Table size: 700×1200 mm Die mounting hole diameter: Ø60 mm Ram size: 780×400 mm Table height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 SPM Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, throat depth: 350 mm, table width: 700 mm, table length: 1,100 mm, stroke adjustment: 150 mm, pressing force: 250 t, stroke length: 160 mm, power: 22 kW (29.91 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Gbjdpfx Adsx N Nfbjbei Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 800 mm, table length: 1,100 mm, stroke adjustment: 180 mm, pressing force: 200 t, ram bore: 60 mm, power: 15 kW (20.39 HP), punching force: 200 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates by force generated through an eccentric mechanism in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type 200 Ton Eccentric Press is engineered for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for high-volume production. Key Advantages: - Consistent stroke performance and high repeatability in mass production - Operator-focused safety design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Application Areas: - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke Gsdpfsvtyx Iex Adbjbi • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD control panel (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set in requested specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Tons Throat depth: 340 mm Distance between table and slide: 500 mm Distance between slide and table: 600 mm Width between uprights: 510 mm Slide adjustment (shut height adjustment): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchoring dimension: 920 mm Side anchoring dimension: 1420 mm Table hole diameter: Ø240 mm Table dimensions: 680×1000 mm Die clamping hole diameter: Ø60 mm Slide dimensions: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.