Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. Gbjdpj Ah Simjfx Aanew • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: good (used), Year of construction: 2003, used edge banding machine Model Hebrock AKV 3003 DKF Year of manufacture 2003 Direct glue application to the workpiece including joining unit Support divider for edge material High-frequency miter saw Chip collection box (miter saw) Pneumatic roller trimming Transport chain with permanently screwed-on special chain plates Double roller pressure (ball-bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (miter saw, corner milling cutter) Quick-heating glue tank (maintenance-free, Teflon-coated) Maintenance-friendly and operator-friendly design Corner milling cutter Surface trimming blade Chip collection box (trimming blade) Max. edge thickness 8 mm min/max. workpiece thickness 10 / 40* mm Gbedpfo Ahpbqjx Aanjw Min. workpiece length approx. 200* mm Min. workpiece width approx. 70* mm Feed speed approx. 10 m/min Ready for operation in approx. 6 min Max. power consumption 12 kW Electrical connection 400 V / 3 phases / 50 Hz Dimensions (length x width) 4300 x 1400 mm Dimensions (height) 1620 mm Weight 1250 kg

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: AKV 3005 DK-F Year of manufacture: 2016 Total edge length processed: 88,570 m Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Surface scraper blade: Yes Buffing unit: Yes Godpfxsz Hbqlj Aanjbw

Condition: used, Year of construction: 2005, machine/vehicle number: 5819, functionality: fully functional, power: 5.8 kW (7.89 HP), input voltage: 400 V, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, For sale is a professional and reliable Hebrock Euro 2000 (Plus) edge banding machine from 2005. The machine is in very good, fully functional condition. The glue pot is in perfect condition and heats up quickly and cleanly. The machine can be tested and demonstrated on-site while powered. Features & Highlights: Manufacturer: Maschinenbau Hebrock GmbH (Made in Germany) Model: Euro 2000 / Plus Year of manufacture: 2005 Machine no.: 5819 Gbedpfxj Ah Sgrs Aanjw Glue pot: Quick-heating hot melt glue container (heating time approx. 6 minutes) – fully functional and clean Cutting unit: Pneumatic roller cutting / sawing unit for precise trimming of front and rear edges Routing unit: High-frequency flush and radius routing unit (flush, bevel, and radius routing) Operation: Ergonomic control panel with digital adjustment for quick format and edge changes Edge material: Suitable for roll and strip material (e.g. ABS, PVC, veneer, wood strips) Chassis / Transport: Includes device for easy transport within the workshop Technical data: Connection: 230 / 400 V – 50 Hz Power consumption: 5.8 kW Current: 11.6 A Feed speed: approx. 10 m/min Extraction nozzle: Ø 100 mm Included: Dust extraction system with filter bag (see pictures). Condition & Collection: Condition: Used, well-maintained, ready for immediate use. Test run: A test run / demonstration on-site is highly recommended and can be arranged by appointment. Location: 65719 Hofheim am Taunus Sale: Collection by buyer. Loading is possible on-site using a forklift / pallet truck. Legal note: Sale is made excluding any warranty or liability for defects.

Condition: used, Year of construction: 2022, machine/vehicle number: AH00003901, functionality: fully functional, input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 60 mm, height adjustment type: electric, actuation type: electric, overall weight: 2,650 kg, Equipment: CE marking, documentation/manual, used SCM Stefani KD edgebander in HP configuration, year 2022. The machine is in excellent condition and can be seen running. Units: RT/E pre-milling unit with diamond cutters (H 64 mm) VC800 gluing unit with pre-heating for EVA glue Automatic edge feed from coil and strips K/SEL end trimming unit, tilting 0–15° R-HP Multiedge tilting trimming unit for 2 radii (4-axis positioning) Round K corner rounding unit R-HP Multiedge radius scraper for 2 radii and RAS/V scraper RCA/2C flat scraper Buffing brushes Gsds Aifpwopfx Aanjbw Additional equipment: Startouch 12" control, ready for a barcode reader Top pressure belt instead of wheels, which protects matt and gloss panels Easy Size (automatic infeed fence positioning) Spray units for anti-adhesive, cleaning and gliding agents Infrared ceramic lamp 1700 mm extendable support for workpieces up to 2200 mm wide Copying wheel kit for nesting panels CE Technical data: Feed speed: 10–20 m/min Panel thickness: 8–60 mm Coil edges: up to 3 × 45 mm Solid wood edges: up to 8 mm

Condition: excellent (used), HOMAG KDF650 edge banding machine Top pressure beam for material clamping, Application of liquids, Pre-milling cutters, Glue application, Preheating unit with glue pot QA65N Additional glue pot Pneumatic preliminary trimming guillotine, Pressure rollers Final trimming cutters, R1-R2 top and bottom milling unit 2x R1-R2 corner rounding unit Multi-profile cycling cutter R1-R2 Flat cycling cutter, Application of liquids Polishing unit, Nesting The machine has NC control; all settings and functions are controlled from the control panel. Max. component height: 60 mm, Max. edge band thickness (roll): 3 mm, Feed speed: 8-18 m/min The machine is in very good condition and is only slightly different from a new machine. Gbedpfx Ae Aiuideanjw Operating hours: 1048 h

Condition: used, Year of construction: 2013, machine/vehicle number: 2365, functionality: fully functional, power: 10.5 kW (14.28 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 3,200 mm, height adjustment type: mechanical, feed rate X-axis: 10 m/min, actuation type: manual, total height: 1,650 mm, total length: 4,300 mm, total width: 1,500 mm, overall weight: 750 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, The machine has always been well-maintained, and even minor repairs were carried out by Santen & Marzeion from Heede when necessary. Over the past 4 years, the edge bander has been used very little. Due to the owner's retirement, the carpentry business is being closed down, and I would like to sell this reliable Hebrock machine. The model features 2 jointing cutters, an infeed belt, a squaring shear, a flush saw, a flush router, a rounding router, and saw blades. Questions are welcome. Gedpfx Aeznwyzoansbw

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 2306_16_4003, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: DC, edge thickness (max.): 2 mm, feed rate X-axis: 20 m/min, total height: 850 mm, total length: 1,000 mm, total width: 700 mm, overall weight: 170 kg, SCHUGOMA System TMS_8462 – mobile edge banding machine for zero-joint technology – Siemens control For sale is a mobile edge banding machine for zero-joint technology from SCHUGOMA System GmbH, model TMS_8462, manufactured in 2016. The machine has hardly been used, is in very good condition, and is ready for immediate use. It features a Siemens control system and is suitable for woodworking companies, carpentry shops, and furniture manufacturers. This is an interesting opportunity for companies looking for a scarcely used machine for professional zero-joint technology. Gjdpfx Aao Adqr Hjnjbw The machine can be inspected on-site by appointment. Interested parties can personally verify its condition and operational readiness.

Condition: used, machine/vehicle number: 008811, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Gjdpfxs Ai N S Ho Aanebw Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Felder TEMPORA F600 edge banding machine Liquids Godpo Aira Hefx Aanjbw Pre-milling cutters, Roller glue application, Replaceable tank, Second tank included, Pneumatic guillotine for pre-trimming, Liquids, Final trimming cutters, Top and bottom milling unit, Dual unit for corner rounding, Profile edge finishing, Cleaning liquids, Flat edge finishing, Polishing unit, The machine features NC control, Max. element height: 60 mm, Max. veneer thickness (roll): 3 mm, Feed rate: 10 m/min, Inspection and testing on-site are possible.

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed speed: approx. 10 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy operation of the machine 4 programs can be saved. Machine in Highflex design, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, one glue pot currently installed Top pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with dia cutters, sharpened Contact heating shoe for preheating the board Gluing section with automatic edge feed for roll material up to 3 mm, switchable for forward and reverse operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cutting saw with 2 motors, straight cut or bevel cut (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfering, and rounding Corner rounding cutter R2 with dia cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened. Saws sharpened, dia jointing cutters sharpened. The machine is therefore ready for immediate use. Only the dia cutter of the profiling cutter has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. Gbjdpfxozzqwms Aanjw The machine unfortunately does not have an operating hour counter, but it still looks very good. Very good condition, see original photos Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2011, Edge banding machine Manufacturer: Biesse Type: Akkron 440 Godpfxszltbis Aanjbw Year of manufacture: 2011 Edge band thickness: 0.4 - 3 /10 mm Workpiece thickness: 10-60 mm Feed rate: 18 m/min Workpiece thickness adjustment: Electric Overall length: approx. 5,100 mm Gluing unit: Yes Trimming saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Straight trimming blade: Yes Scraping unit: Yes Spray device: Yes

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Stefani Solution XD Year of manufacture: 2017 Technical data Feed speed: 25 m/min Board thickness: 8-60 mm Edge thickness: 0.3-22 mm Rolled material: up to 3 mm Edge trimming unit Gluing unit Cutting unit Flush trimming unit Corner rounding unit Profile trimming blade Surface trimming blade Note: Gjde Aiglbepfx Aanjbw The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2019, Edge banding machine Manufacturer: Felder Type: Tempora 45.03 L Year of manufacture: 2019 Workpiece thickness: 8-45 mm Edge thickness: max. 3 mm Min. workpiece length: 140 mm Feed rate: 9 m/min Total power consumption: 14.5 kW Number of workpieces: approx. 75,400 pieces Total edge length: approx. 59,300 m Jointing unit: Yes Miter saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius drawing blade: Yes Godpfezlr Nfsx Aanobw Straight drawing blade: Yes Buffing unit: Yes Spray device: Yes

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 340-0 / 511, functionality: fully functional, Machine available from November 2026 Sold on behalf of a customer Workpiece length min. 180 mm Workpiece width min. 60 mm Edge thickness (coil stock) 0.4 - 3 mm Edge thickness (strip stock) max. 15 mm - Multi-edge magazine (Ostermann) - 1888 Control panel - Motor-adjustable infeed guide, PLC controlled - 1961 Pre-milling unit - 1901 Edge magazine, fully automatic - 1905 Glue station for granules & cartridge with storage hopper Processing of EVA & PUR adhesives - 1913 Pressing unit with pneumatic, adjustable pressure. Adjustment based on edge thickness, motor-driven, PLC controlled - 1918 Trimming unit 2, motor-driven, pneumatic adjustment 0 - 12° - 1823 Flush trimming unit, up to 15 mm - 1942 Multi-milling unit, flush, chamfer, radius, pneumatic - motor-driven, PLC controlled - 1983 Corner rounding unit - 1929 Radius scraping unit - 1964 Surface scraping unit - 1940 Buffing unit Gbedpfsz Hpi Aox Aansw - 1856 Spraying system, front for release agent, rear for cleaning agent - Extendable support - Dimensions L/W/H 5920 / 1250 / 2170 - Weight approx. 1825 kg

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 20 m/min, total height: 1,500 mm, total length: 8,850 mm, total width: 1,250 mm, overall weight: 4,000 kg, year of last overhaul: 2021, Equipment: documentation/manual, Nabízíme k prodeji použitou, repasovanou olepovačku OTT PROFIMATIC PM 2508-F, určenou pro olepování hran tavným lepidlem PUR a EVA. Stroj je plně funkční. Stroj má elektronicky řízený agregáty na konci stroje nově instalovaný frézovací agregát pro drážky, falce a různé jiné frézování. Stroj je v pravostranném provedení a je určen k olepování dýhových, umělohmotných a masivních hran. Stoj je vybaven předfrézovacím agregátem (2 motory) pro frézování čelní plochy. Jedná se o jednostrannou olepovačku s obsluhou z pravé strany, určenou pro nalepování a opracování hran z dýhy, umělé hmoty a masivních hran. Technické parametry Tloušťka hrany: 0,2 - 20 mm Minimální šířka pracovního dílce: 70 mm Minimální výška pracovního dílce: 8 mm Maximální výška pracovního dílce: 60 mm Minimální délka dílce: 150 mm Provozní napětí: 400 V / 50 Hz Průběžná rychlost: 10-20 m/min Nanášení lepidla: válec pro nanášení lepidla s dávkovací automatikou Vario Melt - lepidlo EVA + tavný PUR Stroj kompletně olepí nábytkové dílce včetně rožkování. Pracovní výška: 880 mm Připojení stlačeného vzduchu: 6 bar / 1/4" Rozměry stroje Výška: 1 500 mm Šířka: 1 250 mm Délka: 8 850 mm Hmotnost: 4 000 kg Gbjdpfs Aa Aqysx Aansw PUR balíček: obsahuje rychlovýměnnou hlavu a trychtýř Stroj prošel v roce 2021 repasem v závodě OTT v Lambachu. Tuto skutečnost jsme schopni doložit dokumenty. Po repasování byl do stroje nainstalován nový software, nová řídící jednotka a obrazovka. V případě zájmu jsme schopni poskytnout veškeré dostupné technické podklady, potvrzení o provedeném repasování stroje a další související dokumentaci. Na vyžádání rádi zašleme také videa stroje z provozu.

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BRANDT OPTIMAT KDF 350 C has a total of 1,119.21 operating hours and has processed 94,963 workpieces, with a total edge length of 60,365.1 m. If you are looking to get high-quality edgebanding capabilities, consider the BRANDT OPTIMAT KDF 350 C machine we have for sale. Contact us for further details. - Control Software Version: V.2.43- Total Operating Hours (Gesamt Stunden): 1119.21 h- Current/Reset Operating Hours (Stunden): 1.43 h- Total Workpieces Processed (gesamt Werkstücke): 94,963 pcs (Stck)- Current/Reset Workpieces Processed (Werkstücke): 1,181 pcs (Stck)- Total Edge Length Processed (Gesamt Kantenlänge): 60,365.1 m- Current/Reset Edge Length Processed (Kantenlänge): 1,240.2 m- Voltage: 400 V- Control Voltage: 24 V- Frequency: 50 Hz- Phase: 3~+N / 3~- Fuse Rating: 25 A Gjdpfo Ai Txzox Aanebw

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Gsdpfx Aajwlbxlenobw Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Gbjdpfxszn Afpj Aanow Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100 mm, 4x80 mm including the piping shown in the picture to 200 mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure with manual adjustment using a crank and SIKO counter Infeed guide with manual adjustment and SIKO counter Jointing cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color change from white to transparent Gluing section with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination routing unit, easily adjustable by hand for flush trimming, chamfering and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All indexable inserts of the routing units and trimming blades have been renewed or resharpened, saws have been sharpened, diamond jointing cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2019, HOMAG EDGETEQ S-380 / KDF 650 C (1650 E), year of manufacture 2019 Feed rate: 8–18 m/min. Workpiece thickness up to 60 mm, depending on application limits. Edge material: rolls 0.3–3 mm, strips 0.4–12 mm. Working height 950 mm, compressed air minimum 6 bar. Equipment: Joint milling cutters (2 × 2.2 kW), QA65 gluing unit with pressure zone, BALTI hot-melt unit, trimming unit, multi-stage and profile milling cutters, profiling and glue joint trimming blade, edge trimming unit and spraying equipment. Meter readings according to the photo dated October 22, 2026: 1,780 hours of processing time, 5,495 hours of feed time. Gbjdj Ah Rcaopfx Aansw The EDGETEQ is offered separately. Location: Basel area, Switzerland. Inspection by appointment only. Price upon request.

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, power: 7.5 kW (10.20 HP), type of input current: three-phase, actuation type: electric, total height: 1,400 mm, total length: 5,200 mm, total width: 1,400 mm, overall weight: 1,500 kg, year of last overhaul: 2021, Edge gluing from 0.6 to 13 mm Cartridge gluing Gbedpez A Dhrofx Aanjw Pre-milling Fine milling Cutting twice Pull knife Smoothing Year of manufacture is estimated Machine was stored a year ago Until that time, it was fully functional.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Dedy chocolate coating machine, small and easy to handle, for coating nut corners, heart-shaped pastries, and cookies! The machine is made entirely of stainless steel and has wheels. Connection: 230 volts, plug. If you have any further questions, please do not hesitate to contact us. Godew T Rxcspfx Aansbw Thank you in advance!

Condition: excellent (used), Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Gsdpoz Afctefx Aanebw Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm SPS screen control Edgecontrol motorized, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing station fully automatic edge magazine for roll and strip material glue application station, cartridges + PU gluing automatic glue height adjustment / touch probe nozzle pressure unit 1913, pneumatic cutoff unit for roll and strip material 1918 - 15 mm with pneumatic adjustment of the cutoff saw angle from 0-10° multi-function milling unit with motorized adjustment: flush trimming - 15 mm, radius and chamfer milling - 15° Gjdpfx Aas Aitifensbw flush milling unit - corner rounding 1833 edge trimming unit for chamfers and radii 1929, pneumatic pneumatic infeed and outfeed surface trimming unit - finish, pneumatic buffing unit for final polishing and edge polishing with 2 textile discs HIGH-END spray system complete tool set Machine is FUNCTIONAL Machine from a craft business / brokerage sale Available from stock in Lieboch, NET € 19,000.00

Condition: used, Hebrock K34 Edge thickness up to 8mm PLC-controlled touchscreen with a 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable glue containers and glue dispensing system Edge height max. 60 mm Trimming unit Milling unit for flush cutting, radius, and chamfer milling Gbodpfxj Aitb Uo Aanew Corner rounding unit for radii/chamfers Multi-radius trimming blade (R1/R2) Nesting Surface trimming blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW CONDITION and in TOP SHAPE From a carpentry workshop liquidation/retirement sale Available from a carpentry workshop, SALES PRICE NET €45,000.00