Condition: excellent (used), functionality: fully functional, total length: 9,300 mm, overall weight: 4,000 kg, Feed rate steplessly adjustable from 18 - 24 m/min For edge material from roll or as strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber pad Workpiece support in scissor design, extendable up to 1000 mm Infeed extension 500 mm Feed device with 2 diagonal powered rollers Ibsdsw Sdlmopfx Ah Uef Processing units: Jointing milling unit with 2 motors each 3 kW A20 gluing unit HL83 end trimming unit for bevel/straight with 2 motors each 0.5 kW Pre-milling unit with 2 motors each 1.5 kW FK 8-position profile milling unit automatic with 2 motors each 0.55 kW MN multi finishing unit automatic Finishing unit for glue joint Buffing unit above and below with oscillation Chip conveyor Electronic frequency converters for processing units HOMATIC control system with NC21 input unit Machine in good condition.

Condition: used, machine/vehicle number: 007825, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Iodpfewk Uzkjx Ah Usbf Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Ijdsw R Hiropfx Ah Usbf Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: used, Year of construction: 1989, - workpiece thickness max. (mm): 55 - workpiece width min. (mm): 80 - Profile depth max. (mm): 80 - inner radius min. (mm): 10 - Edge material thickness max. (mm): 3 - depending on radius and edge material - milling motor: 0,5 kW, 27.000 rpm. - Electricity: 220 V - 1 Ph. - 50 Hz - Connection value (kW): 0,5 Ibsdok E Hrbspfx Ah Uef - Compressed air connection (bar): 6 - dimensions L x W x H (mm): 850 x 650 x 1430 - working table height (mm): 1000 - buffing unit: for processing thick PVC edges - Weight (kg): approx. 120

Condition: good (used), Code: 0078 Brand: FRAVOL Model: RX 300 - CE Standard Automatic edge bander with grinding unit for EVA - PUR - POLYURETHANE glue, with grinding unit for application of PVC, Abs , melamine , veneer , strip and roll edges, for joinery workshops, custom-made furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Technical data: Panel height mm 10-120 Edge height mm 120 Panel width min mm 60 Edge thickness mm 0,4-16 Ibodpfev Tnpnox Ah Usf Variable feed 10/20 mt/min Microprocessor control (PLC) - Touch screen 10,7 Colour Grinding unit consisting of n° 2 iPre-milling units - Motors each 2,2 Kw - Rpm 6000 IR Lamp - 0-600 degrees - Watt 600 Automatic edge loader Universal gluing unit with pre-melting Quick release Roll edge cutting Glue tank cleaning bench Two motor end trim - Motor power 0, 50 kW each - Rpm 12000 Tilting trimming unit - Motor power each Kw 1,1 - Rpm 12000 Diameter of suction mouths: n° 1 diameter mm 120 - n° 3 diameter mm 80 Fixed roller conveyor for supporting large panels Compressed air 6 bar Installed power Kw 9,4 Overall dimensions mm 4880 x 1040 x 1910 h Weight kg 1600

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Iedpfx Ahswka Nys Uebf Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) Iedpfx Aex Dcn Njh Uebf OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Iodpfx Aox A Hi Ioh Uebf Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05

Condition: used, Year of construction: 2016, Plate feed direction: from operator to the left Max. edge thickness: 2 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 40 mm Min. workpiece length: 180 mm Feed speed: 7 m/min Heating time: 4 min Jointing unit: Yes, with 2 milling units Jointing tool: diamond cutter Diameter: 70 mm Height: 43 mm Adjustment of infeed fence: diamond cutter Cut-off shear up to: 2 mm Individual edge feeding: possible Ibsdpfxex Hwq To Ah Uof Gluing: glue contact roller Cut-off saw: Yes Combination flush/chamfer/radius unit: pneumatically adjustable Scraper: Yes, scanning Display of units: on the display Control type: PLC line control Operation: touch screen Motor power: 7.4 kW Travel device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 750 kg Extraction connection diameter: 140 mm Electrical connection: 400 Volt/50Hz Storage location: Customer

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) Isdpfelht Hwsx Ah Uobf F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers Ibodsvhc E Hjpfx Ah Uof End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Iodpfx Ahox A Th De Usbf Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 7 nr

Condition: new, Year of construction: 2025, The Hebrock F 2 Iodpfxslht Hze Ah Usbf The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: good (used), Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Ibedpfx Ahox Ihulo Uof Weight kg 250

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650 Ibsdpex A Thqofx Ah Uef

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. Iedpfx Ahsi Am U Do Usbf max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: good (used), Code: 0042 Brand: FRAVOL - ITALY Model: A 16 ACR - CE Standard Edge bander for pre-glued edges with trimming unit for straight and curved panels - CE Standard Technical data Min/max panel height mm 10/60 Feed speed mt/min 3,8 Temperature regulator 0-500° Voltage 220 Installed power 3700 Watt Iodev Ay Hkopfx Ah Ujbf Upper/lower trimming unit Overall dimensions mm 950 x 600 x 1000 h Weight kg 120

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Ijdpsw Ic Tzefx Ah Uobf Operating Units: 7 nr

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Ibedpfx Ahohqadcj Usf Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: good (used), Code: 0186 Brand: BIESSE ARTECH Model: AKRON 420 - CE Standard Automatic edge bander for wood, Pvc, Abs, and melamine edges for carpentry, furniture, kitchens, custom-made furnishings, panels and various - CE Standard Technical data: Panel height 10-60 mm Min/max edge thickness 0,4-6 mm Minimum panel length 140 mm Minimum panel width 50 mm Track feed speed 12 mt/min Protective cabin Composition: Gluing unit: Glue tank capacity 2 kg - Shear for 3 mm roll edges End tcutting unit: n° 2 independent high-frequency motors 0,5 Kw - Inclination from 0 to 15° Tilting fine finishing unit: 2 independent high-frequency motors 0,65 Kw , tiltable from 0 to 25° Ibedow D E Dijpfx Ah Uof Brush unit: Brush diameter mm 150 - Motors Kw 0,37 each Suction port diameter mm 150 Compressed air 7 bar Overall dimensions mm 3200 x 1000 x 1500 h Weight kg 900

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A Ibjdpfsw Tq Iwex Ah Uef

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Tool for straight/radius trimming Iedpfxjxac Hws Ah Uebf TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT LED INTERNAL LIGHTING DOCUMENTATION IN GERMAN INFRARED LAMP for panel pre-heating SCRAPER UNIT Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 007983, Position 1: Single Edgebanders SCM-STEFANI KDR Ijdowqndljpfx Ah Ujbf Position 2: Panel Return Systems SCM-STEFANI KDR

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Ibsdji Am Ukopfx Ah Usf Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024 Ibsdpfx Aji Anadoh Ujf