Condition: used, machine/vehicle number: 008430, Position 1: Panel Feeding and Loading MAHROS + STEFANI-RUNNER + EVOLUTION Dkedpeyqxx Sefx Ag Rsk Position 2: Double Sided Squaring/Edgebanding Machines MAHROS + STEFANI-RUNNER + EVOLUTION Position 3: Panel Stacking and Offloading MAHROS + STEFANI-RUNNER + EVOLUTION

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Dedpfoyqanbex Ag Rskk Availability: short notice Location: Röllbach

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Dkjdpfx Agoyud S Eo Rek Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs

Condition: excellent (used), Brandt Optimat KDN340 Edge Bander Glue application by roller Tank features exchangeable system (machine is supplied with only one tank) Pneumatic pre-cut guillotine Pressure rollers End-trimming saws Top/bottom milling unit R1-R2 Profile scraper Dkjdpfx Agsywwqze Rek Polishing unit Max. workpiece height: 45mm Max. edge thickness (in roll): 3mm Feed speed: 10m/min Machine length: 310cm The machine is well-maintained and in very good condition.

Condition: like new (used), Pre-milling unit Glue station for granulate Dodpfoyzqhhsx Ag Rekk 2 pressure rollers End trimming unit with two saw blades Radius milling unit Pull-out support from the table Year of manufacture: 2019 Machine length: 2.7 m 400V 7 kW CE marking

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips Dksdjc Tmygjpfx Ag Rjk motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes Dkodpfek Eai Uox Ag Rok cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: good (used), Code: 0367 Dkedpfeytfnfjx Ag Rsk Brand: SCM Model: BASIC 1 Automatic edge bander for wood edges, Pvc, melamine, Abs Technical data: Working height mm 8 - 40 Banding material thickness mm 0.4 - 3 Feed speed 8 mt/min Min. panel length mm 140 Min. panel width mm 60 End cutting unit : Rotation speed rpm 10000 - Motor power Kw 0,6 End trimming unit: Rotation speed rpm 27000 - Motor power Kw 0.5 - Tilt of cutters 12 degrees Working pressure Atm 6 Overall dimensions: mm 1700 x 700 x 1250 h Weight kg 470

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, Trimming, gluing, end trimming, edge trimming, corner rounding, scraper-edge, and polishing. Our ECO F7 stands out from other compact edge banders because all the functional modules of the Eco F series are derived from, and suitably adapted from, industrial edge banders. While maintaining the same high precision and stability as industrial edge banders, the maximum durability and operational efficiency of the equipment are preserved. The Eco F series saves space and provides excellent edge banding results. It is ideal for small furniture factories, decoration workshops, and woodworking shops; it also serves as an excellent solution for small batch production in large-scale furniture manufacturing facilities. Most components are sourced from high-quality, well-known brands, such as: SIEMENS, AUTONICS, HONEYWELL, OMRON, and DELTA. Dodpouzxk Aofx Ag Rokk Includes: – Infrared heating lamp – Glue scraper – Meter counter – Cleaning liquid – Release agent MOTORIZED HEIGHT ADJUSTMENT Complies with the latest CE regulations.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Dodpfxeytr Hbj Ag Rskk Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: C-261-04-2523, functionality: fully functional, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Dksdpfsxhgk Aox Ag Rek Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Dkodpfsyttrxsx Ag Rok Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Dedpfx Ajytr Rgog Rjkk Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Condition: used, machine/vehicle number: 008161, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Dsdpfx Aox A Tlcjg Rjkk Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: good (used), Year of construction: 1988, functionality: fully functional, PLC control Workpiece thickness max 60 mm Edging thickness for roll material 0.4 - 3 mm Edging thickness for strip material 0.6 - 20 mm Edging thickness for strip material (without flush trimming) 30 mm Minimum workpiece width 60 mm Minimum workpiece length 140 mm 1901 Automatic edge feed for strip/roll material 1907 Glue application for panel thickness up to 60 mm, "Ultra-Granu-Press" granulate heating time approx. 3 - 4 minutes 1911 Pressure unit up to 30 mm edging thickness 1916 End trimming unit 2 x 1.1 kW up to 30 mm edging thickness 1920 Flush trimming unit 2 x 1.1 kW up to 20 mm edging thickness 1966 Profile trimming unit, flush/chamfer/radius up to R = 3 mm 1927 Scraper unit, pneumatically controlled 1944 Buffing unit 2 x 0.15 kW, automatically actuated Dkjdpjyntq Dofx Ag Rek Feed rate 8/16 m/min Length 5720 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 7.1 kW (9.65 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 16 m/min, total height: 1,750 mm, total length: 3,960 mm, total width: 900 mm, overall weight: 1,200 kg, operating pressure: 6 bar, compressed air connection: 6 bar, plate height: 60 mm, plate length: 1,200 mm, pneumatic connection: 6 bar, pressure: 6 bar, product height (max.): 1,750 mm, Fravol edge banding machine, model F600-23 Plus, from the year 2023. - Touch display for setting all necessary parameters - Pre-milling unit - Separation and cleaning agent spraying system - Glue application - Pressure zone - End trimming unit - Top and bottom trimming units - Corner rounding unit - Radius scraper - Flat scraper All units are mechanically / manually adjustable. The machine was only very rarely used for demonstrations and testing purposes at our factory and operates perfectly. Dedpjx I I Rasfx Ag Rokk The machine is in as-new condition with no known defects or damage. The machine can be inspected and collected at the Rödinghausen facility. On request, we are happy to prepare sample pieces in advance.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Incl. quick-heating, exchangeable, Teflon-coated glue pot Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Incl. spraying unit Availability: short-term Djdew Nadgjpfx Ag Rskk Location: Flörsheim

Condition: good (used), Year of construction: 2005, Gluing unit Motorized height adjustment Homatic NC 21 control unit Frequency converter A20 hot melt adhesive unit for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat panel display Feed rate 18.5 m / min ? Feed rate steplessly adjustable 8–24 m/min or 12–24 m/min Dedpeyvy D Iofx Ag Rjkk Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece projection 30 mm Workpiece thickness 12–60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Jointing/milling unit Workpiece preheating A 20 gluing unit / A 34 hot melt adhesive unit Magazine for solid wood edging, strip material, and roll material Roll cutting device Pressure zone KL end trimming unit Release agent spraying device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, quick-change (for color changes) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Automatic multi-trimming unit, complete Finishing unit The illustrated return unit is not included in the scope of delivery. The data were taken from a data sheet and are therefore supplied without guarantee. Exact configuration on request.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, DEMO MACHINE EX WAREHOUSE DENMARK Dkjdpfoymn D Njx Ag Rsk NB7CJ – Single-Sided Edge Banding Machine Selected Standard Equipment and Features: • Panel length: min. 120 mm • Panel width: min. 80 mm (200 mm for corner rounding) • Panel thickness: 10 – 60 mm • Edge tape thickness: 0.4 – 3 mm • Edge tape width: 15 – 65 mm • Track speed: 16 / 20 / 24 m/min • Installed power: 27.5 kW • Machine weight: 2460 kg • Machine dimensions: 7700 × 1450 × 1650 mm • Quick-release glue pot for fast change and easy cleaning • Full edge banding cycle: pre-milling, pre-heating, trimming, corner rounding, scraping and buffing • Touchscreen control with intuitive interface • Compact design with nesting kit – suitable for pre-drilled panels • Dust extraction: 4 × Ø125 mm outlets • Optional return system for increased efficiency • Stable steel construction with long service life • CE certified and 3 years warranty

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, DEMO MACHINE EX WAREHOUSE DENMARK: • Panel length (corner trim): 120 mm (200 mm) • Panel width: 80 mm • Min panel size: 120 mm × 80 mm • Min panel size (corner trim): 200 mm × 80 mm • Panel thickness: 9 mm – 60 mm • Edge tape: 0.4 mm – 3 mm • Edge tape width: 15 mm – 65 mm • Feeding speed: 18 / 22 / 26 m/min • Feeding speed with corner trim: 22 m/min • Dust outlet: 8 × 125 mm dia • Weight: 6110 kg • Dimensions: 11200 × 1450 × 1650 mm Process steps: 1. Pre-milling 2. Pre-heating 3. Pre-melt 1 4. Pre-melt 5. Dual rail end trimming Dkjdpfx Agsymny Rs Rjk 6. Pneumatic control fine trimming 1 7. Pneumatic control fine trimming 2 8. 4 motors corner trimming 9. Pneumatic control scraping 1 10. Pneumatic control scraping 2 11. Off-cut 12. Flat scraping 13. Oscillating buffing 1 14. Oscillating buffing 2

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm Dkedpfshy Tlrex Ag Rjk compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. Dksdol D Rp Eopfx Ag Rok The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm Dsdpfxec S Di Re Ag Rjkk brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dkodpfxewiwnqs Ag Rok Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Djdpfxslc Ewie Ag Rskk Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg