Condition: used, Year of construction: 2018, functionality: fully functional, Biesse Akron 1400 Edgebander. Genuine UK Machine available for demonstration: £10,000 + VAT This machine is suited for flush or bevel trimming of edgebanding materials upto 8mm thick (Max 3mm on the coil). Currently the machine is fitted with Straight cutters, but combination cutters can be fitted for radius trimming. Bjdpfx Aajxrwm Nscslp This machine DOES NOT do corner rounding. But does have the following units: - Pre-Milling. EVA Hot Melt Gluing System. End Snipping Saws (Straight or Chamfer cut). Rough Trim (Top & Bottom). Fine Trim (Top & Bottom). Glue line scraping (Top & Bottom).

Condition: used, total length: 4,200 mm, total height: 1,750 mm, total width: 1,250 mm, Weight: 1.200 kg Price: On request - Documentation available: No - Transport dimensions: 4200mm x 1250mm x 1750mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Blodpsxtbk Uofx Aacjp Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Bljdpfxsxhgk As Aacop Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipped with PLC control including touchscreen With jointing milling unit with DIA tool, up to 2 mm milling depth (max. jointing thickness 1 mm for special materials such as multiplex) With extendable workpiece support With quick-heating glue pot with glue change device With cross-cut saw With combination milling unit, radius = 2 mm, with separate pneumatic milling adjustment With corner rounding, radius = 2 mm With flat scraper Max. edge thickness: 2 mm Min. - max. workpiece thickness: 10 - 40 mm Min. workpiece length: 180 mm Feed speed: approx. 7 m/min. Ready for operation: approx. 3.5 min. Blsdpjxua Rcefx Aacjp Power consumption: approx. 7.4 kW With undercarriage Machine dimensions: approx. 4200 x 1300 x 1400 mm Weight: approx. 750 kg Extraction nozzle: 1 x 140 mm Availability: approx. end of January 2026 Location: Frankfurt

Condition: excellent (used), Year of construction: 2019, operating hours: 613 h, functionality: fully functional, machine/vehicle number: AH00001133, feed rate X-axis: 18 m/min, power of the buffing unit: 260 W, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 1,500 W, overall weight: 1,746 kg, type of input current: AC, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 415 V, power: 20 kW (27.19 HP), input current: 48 A, input frequency: 50 Hz, Manufacturer: SCM Model: Olimpic K560R Year:2019 Condition: Excellent. Lightly used and currently used in manufacturing Availability: End Oct 2025 Location: Northern Ireland Financial Information: VAT: This will be charged to UK companies only Duty: There is no customs or duty selling into the EU from Northern Ireland Price: This is as seen and does not include preparing the machine for transport Machine Specification: If you want to run Airtec (Airfusion) PU and EVA then this is the machine for you. This is a fully specified K560 with many extras. Everything you need to put it into production quickly is included. Please read the full description. Track Speed 12-18mm Panel Thickness 8-60mm Max Edge thickness Strips 6mm Max Edge Thickness Coil 3mm Coil plate diameter 780mm Distance between two panels 600mm Min Panel Length 140mm Min Panel Width 100mm Work height 900mm Machine length: approx. 4950 mm Autoset: Automates the machine set up when changing work (e.g. changing from 1st to 2nd passage) Pre-Milling: 2 off high freq motors Max removal 3mm Infra-red Ceramic Lamps: The heat the panels before gluing Bedpfx Aaew Nyqaocslp AAR anti-adhesive unit: Prevents adhesive sticking to the upper and lower panel surfaces SGP - Special Glue Pot: Machine configured for BOTH EVA and PU glue Airfusion +E unit: Hot air application of pre-coated edge band to avoid the use of glue K/SEL end trim unit: 2 high freq motors 0-15 deg adjustment of cutting angle RK trimming unit: 2 high frequency motors ROUND X Rounding unit: Twin high frequency motor corner rounding RAS/K edge scraping unit: For rounded edge scraping post machining RCV glue scraping unit: Top and bottom scraping to remove excess edge band and glue SPV brushing unit with spray: removes glue and polishes edging and boar Spray mist device for delicate edges: Allowing the processing of high gloss edging StarTouch electronic control: Touch sensitive control panel Extras included in the price: Leitz pre-milling tooling blocks – Brand new – never used Ducting – The ducting to connect to the extraction Ostermann edge band cassette – For quick change of the edging Pens and wax cabinet on wheels – For any repair needs Electrical cables and switchgear – Allows you to connect up the machine on delivery Optional extras: Extraction system to suit €4000 Compressors to suit €4500 each

Condition: excellent (used), Year of construction: 2005, Edge banding machine Brandt KDF 530 c with jointing, corner copying, two scraper blades, and Riepe spray units. A video of the machine in operation can be provided upon request. The machine is highly automated Edge thickness approx. 0.4 – 8 mm Workpiece height approx. 10 – 50 mm Feed speed approx. 11 m/min Noise protection hood Extendable workpiece support Extraction connection 1x200 mm, 1x100 mm, including the depicted piping PC16 control with color display for user-friendly machine operation Units/features: Pressure beam manual adjustment with SIKO counter Infeed guide manual adjustment with SIKO counter Riepe separating agent spray unit Joint trimming with Leitz Whispercut diamond cutters, sharpened Gluing station switchable between feed and contra-rotation Pressure zone with 3 rollers Cross-cut saw with 2 motors, for straight or chamfered cutting (program-controlled adjustment) Multi-function milling unit with motorized lateral adjustment Radius scraper R2, pneumatic adjustment Corner rounding mill R2 with one diamond cutter motorized, pneumatic adjustment between thin and thick edge Glue joint scraper, pneumatically retractable with large roller Bljdpfx Aasxd Dudscop Riepe cleaning agent spray unit Buffing unit Hood lock CE marking Operating manual available as folder and CD All reversible blades of the milling units and scraper blades have been replaced or rotated, saws sharpened, joint cutters sharpened, buffing wheels renewed. The machine is therefore immediately ready for use. Only the diamond cutter for the profile milling unit has not been replaced but is still sharp. Minor paint touch-ups. Approx. 3,500 operating hours. The condition of the machine speaks for itself. Occasionally, the computer reboots while the machine is running (mainly at higher room temperatures), but this has not been an issue for us—work can continue during the reboot. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1,900 kg. The machine can be inspected in operation at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this supplier."

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Max Panel Width: 3000 mm Max feed speed: 32 m/min Bedpjw Idhtofx Aacslp Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: used, Year of construction: 2002, total length: 3,000 mm, total height: 1,500 mm, total width: 800 mm, Weight: 750 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - Serial number: 2018 - Number of units [pcs]: 3 - └ 1st unit type: Glue unit - └ 2nd unit type: Cap unit - └ 3rd unit type: Rough milling unit Blsdpfx Aaowu N E Socep - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 3 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 70 - Min. panel length [mm]: 80 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 16 - Voltage [V]: 380 - Power [kW]: 9.5 - Transport dimensions: 3000mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, Edgebander Blsdpfx Aajxtnmvocsp Manufacturer: Felder Model: Tempora 60.06L, F600 Year of manufacture: 2020 Edge thickness: 0.4–3 / 6 mm Workpiece thickness: 10–60 mm Feed rate: 10–18 m/min Height adjustment: Electric Weight: approx. 1,500 kg • Long infeed fence • Release agent nozzles • Jointing cutters • 2 interchangeable glue pots • Guillotine shears • End trimming unit 10° + 0° • Flush trimming/copying unit with 2 mm radius • Single-motor corner rounding • Radius scraper • Surface scraper • Cleaning agent nozzles • Buffing wheels

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N Bedpfewka S Isx Aacolp - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2013, Main Drive Bjdpfx Aexr Rxloacelp Spindle speed range 12000 rpm This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, it's ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: excellent (used), functionality: fully functional, total length: 9,300 mm, overall weight: 4,000 kg, Feed infinitely variable from 18–24 m/min For edge material from rolls or as strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber coating Workpiece support – scissor-type, extendable up to 1000 mm Infeed extension 500 mm Feeding device with two driven, angled rollers Processing units: Jointing cutter unit with 2 motors, each 3 kW Gluing unit A20 Trimming unit HL83, chamfer/straight with 2 motors, each 0.5 kW Pre-milling unit with 2 motors, each 1.5 kW Contouring/milling unit FK, 8-position automatic, with 2 motors each 0.55 kW Bsdpfxsw Sdlms Aacslp Multi-stage finish sanding unit MN, automatic Finish sanding unit for glue joint Buffing unit above and below with oscillation Chip conveyor belt Electronic frequency inverters for processing units HOMATIC control system with NC21 input module Good condition of the machine.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x640x1400 mm Weight 700 kg Total power requirement 5 kw Bedpfsvz E T Hox Aacelp

Condition: used, Year of construction: 2013, total length: 3,800 mm, total height: 1,500 mm, total width: 1,000 mm, Weight: 1.500 kg Price: On request - Year: 2013 - Documentation available: No - CE marking present: Yes - Serial number: 230 - Number of units [pcs]: 10 - Voltage [V]: 400 - Current consumption [A]: 17 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1000mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Bledpfxewh Ai Ds Aacjp

Condition: excellent (used), Year of construction: 2011, Edgebanding machine Manufacturer: Biesse Model: Akkron 440 Year of manufacture: 2011 Edge thickness: 0.4 - 3 / 10 mm Workpiece thickness: 10 - 60 mm Feed rate: max. 18 m/min Total power: 13 kW Height adjustment: electric Machine weight: approx. 2,000 kg Joint milling unit: Yes Cut-off saw unit: Yes Radius/trimming milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Blsdpfxoxtnb Te Aacjp Spraying device: Yes

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 9 nr Bodpfsw Tivmjx Aacslp

Condition: ready for operation (used), Year of construction: 2015, This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine. Bsdpsxrwf Sefx Aacjlp Application Types Edge Banding

Condition: good (used), Year of construction: 2000, Double-sided edge banding machine Homag KF 26/9/A3/25 Year of manufacture: 2000 Edgebanding with PUR adhesive Bedpfxsxt Nltj Aacslp

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - Serial number: AH/115214 - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 Blsdpfx Aaewnickecop - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, operating hours: 3,084 h, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Bjdsxr Uf Nspfx Aacolp - Year: 2010 - Documentation available: No - CE marking present: Yes - Serial number: - Operating hours: 3084 - Number of units [pcs]: 9 - └ 1st unit type: Milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Pre-milling unit - └ 5th unit type: Milling unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Grooving unit - └ 8th unit type: Preheating unit - - Tools available: No - └ 9th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 14 - Options: Return transport - Voltage [V]: 230 - Current consumption [A]: 23 - Fuse [A]: 25 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, total length: 5,250 mm, total height: 1,780 mm, total width: 1,060 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - Serial number: 1969 - Transport dimensions: 5250mm x 1060mm x 1780mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Bedpewp D Udefx Aacolp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, total length: 7,500 mm, total height: 1,800 mm, total width: 970 mm, Weight: 5.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit Bedpfx Aexaklusacjlp - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Rough milling unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 7500mm x 970mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, total length: 5,200 mm, total height: 1,600 mm, total width: 1,200 mm, Weight: 1.550 kg Blodpfx Aaew Rd Tzscep Price: On request - Year: 2007 - Documentation available: No - Serial number: 1328 - Transport dimensions: 5200mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Weight: 3.300 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes Blodpfxjwp Dl Ns Aacep - Serial number: 70239 - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW 3PH Bedewlv D Nspfx Aacslp 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels