Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! Assemblies and Units Number of units: 9 1st unit – Pre-milling assembly Dcsdpo Af Hp Dsfx Apmjp 2nd unit – Gluing assembly Manufacturer of the gluing assembly: Nordson 3rd unit – Pressure rollers 4th unit – Cutting assembly 5th unit – Rough milling assembly 6th unit – Milling assembly 7th unit – Fine milling assembly 8th unit – Milling assembly 9th unit – Milling assembly TECHNICAL DETAILS Gluing system: Glue pot MACHINE DETAILS Voltage: 400 V Current consumption: 69 A Fuse rating: 80 A Dimensions & Weight Dimensions (L x W x H): 9,000 x 1,050 x 2,100 mm Weight: 6,000 kg Number of transport packages: 4 EQUIPMENT Tools for pre-milling assembly Tools for pressure rollers Tools for milling assembly Includes PUR unit

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Dcsdpjzzcc Isfx Apmop Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Condition: used, machine/vehicle number: 008665, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR, Cartridges Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Dcodezvwn Ujpfx Apmep Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Djdpfx Ape Afxulsmscp Buffers CE

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000054777, functionality: fully functional, overall weight: 1,650 kg, Equipment: CE marking, documentation/manual, No minimum price – guaranteed sale to the highest bidder! Number of units: 8 1st unit – Pre-milling unit 2nd unit – Gluing unit 3rd unit – Cutting unit 4th unit – Fine milling unit 5th unit – Edge rounding unit 6th unit – Radius pulling unit Dcjdpfx Ae Af Hqzjpmsp 7th unit – Straight pulling unit 8th unit – Brushing unit TECHNICAL DETAILS Edge band thickness: min. 0.4 mm Edge band thickness: max. 5 mm Edge band height: 64 mm Panel thickness: min. 10 mm Panel thickness: max. 60 mm Panel width: min. 50 mm Panel length: min. 150 mm Panel length: max. 3,200 mm Feed rate control: Stepless Gluing system: Glue pot Glue type: PUR/EVA MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Connected load: 11.9 kW Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,100 x 1,500 mm Weight: 1,650 kg EQUIPMENT Documentation CE marking CE certificate Tools for pre-milling unit Tools for cutting unit

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Dodpfx Aoq A I Aaepmjcp Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 210/2003, functionality: fully functional, operating hours: 6,635 h, power: 29 kW (39.43 HP), input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 3,000 mm, workpiece length (max.): 5,000 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,223 mm, total length: 9,420 mm, total width: 1,368 mm, overall weight: 4,350 kg, Equipment: CE marking, documentation/manual, HOLZ-HER ACCURA 1556 Premium – Year of manufacture 2020 – Very well maintained We are offering our HOLZ-HER ACCURA 1556 Premium edge banding machine, manufactured in 2020, for sale. The machine has always been treated with great care by its dedicated operator and has been fully maintained by the supplier throughout its entire service life. The machine has always been kept in excellent condition, and there have never been any major incidents or serious machine damage. Technical improvements and upgrades Reinforced pre-milling motors: The originally installed pre-milling motors were generally too light. Therefore, approximately two years ago, these were replaced with a heavier and improved type. These motors function excellently and represent a significant technical improvement compared to the original design. Dsdpfx Ao Ahhwzopmscp Automatically switchable profile milling cutters (factory option): The machine is equipped as standard with the option to automatically switch between the profile milling cutters with a radius of 1 mm (R1), a radius of 2 mm (R2), and chamfer milling cutters. This allows for easy and quick switching between different edge finishing operations without manual adjustment of the milling heads. Additional Riepe brush system: Riepe has installed an additional brush system specifically for cleaning and processing edge material with a deep surface texture. Condition and maintenance The machine has always been operated carefully, well maintained, and serviced according to the maintenance instructions by the supplier. Thanks to the consistent maintenance, careful operation, and implemented technical improvements, this is a well-maintained edge banding machine with extensive equipment. The machine can be viewed and demonstrated in working order by appointment. If you are seriously interested, we will be happy to provide additional information and photos.

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  Dcodpfxo Ah Sims Apmop 5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: used, total height: 1,600 mm, total length: 5,200 mm, total width: 1,200 mm, Year of manufacture: 2007 Colour: Grey Weight: 1.550 kg - Year: 2007 - Serial number: 1328 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes Dedpfs Ahxh Ajx Apmscp - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 31.7 - Fuse [A]: 35 - Power [kW]: 12.3 - Transport dimensions: 5200mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: CE marking, documentation/manual, Holzher Auriga 1308 XL Suitable for polyurethane coatings. Dcjds Ah Hi Ispfx Apmjp

Condition: used, Year of construction: 2005, machine/vehicle number: 5819, functionality: fully functional, power: 5.8 kW (7.89 HP), input voltage: 400 V, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, For sale is a professional and reliable Hebrock Euro 2000 (Plus) edge banding machine from 2005. The machine is in very good, fully functional condition. The glue pot is in perfect condition and heats up quickly and cleanly. The machine can be tested and demonstrated on-site while powered. Features & Highlights: Manufacturer: Maschinenbau Hebrock GmbH (Made in Germany) Model: Euro 2000 / Plus Year of manufacture: 2005 Machine no.: 5819 Glue pot: Quick-heating hot melt glue container (heating time approx. 6 minutes) – fully functional and clean Cutting unit: Pneumatic roller cutting / sawing unit for precise trimming of front and rear edges Routing unit: High-frequency flush and radius routing unit (flush, bevel, and radius routing) Operation: Ergonomic control panel with digital adjustment for quick format and edge changes Edge material: Suitable for roll and strip material (e.g. ABS, PVC, veneer, wood strips) Chassis / Transport: Includes device for easy transport within the workshop Technical data: Connection: 230 / 400 V – 50 Hz Power consumption: 5.8 kW Current: 11.6 A Feed speed: approx. 10 m/min Extraction nozzle: Ø 100 mm Included: Dust extraction system with filter bag (see pictures). Dcedpfxs Ah Sgro Apmop Condition & Collection: Condition: Used, well-maintained, ready for immediate use. Test run: A test run / demonstration on-site is highly recommended and can be arranged by appointment. Location: 65719 Hofheim am Taunus Sale: Collection by buyer. Loading is possible on-site using a forklift / pallet truck. Legal note: Sale is made excluding any warranty or liability for defects.

Condition: used, operating hours: 335 h, total height: 2,100 mm, total length: 6,500 mm, total width: 1,500 mm, Year of manufacture: 2009 Colour: White Weight: 2.200 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - Serial number: 74 - Operating hours: 335 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Type/Brand: 1856 - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1913 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: 1918 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1826 - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Type/Brand: 1833 - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Type/Brand: 1929 - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Type/Brand: 1964 - - Tools available: Yes - └ 9th unit type: Brushing unit - - Type/Brand: 1940 - - Tools available: Yes - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 60 Dsdpfxo Ahygnj Apmscp - Min. panel width [mm]: 60 - Min. panel length [mm]: 180 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 18 - Glue system: Glue pot - Type of glue: PUR - Voltage [V]: 400 - Current consumption [A]: 56.95 - Fuse [A]: 80 - Transport dimensions: 6500mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2007, machine/vehicle number: 6497, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 7 m/min, actuation type: manual, total height: 1,300 mm, total length: 3,100 mm, total width: 1,320 mm, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Hebrock edge banding machine, model Top 2000 Plus, Edge banding machine with hot-melt adhesive application to the workpiece for edge material up to 3 mm thick. High-frequency cutoff station (flush cutoff station), angled table rollers, automatic edge transport, stepless electronically adjustable temperature display with LED actual value display, protective cover, - Pneumatic cutoff station for edge thickness up to 3 mm (pre-cutoff of the roll) - High-frequency combination flush trimming station with interchangeable blade cutter - Surface scraping blade (without pneumatic extraction device) Dcodpfxj Agakqe Apmep Minimum workpiece width: 90 mm, Workpiece thickness: 10 - 45 mm, Minimum workpiece length: 260 mm, Maximum edge material height: 50 mm, Dust extraction port: D = 100 mm, Compressed air connection: minimum 7 bar Weight: approximately 550 kg As inspected, ex works Seevetal, Ex works, excluding transport, Subject to prior sale.

Condition: excellent (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: TOP 3005-F Year of manufacture: 2016 Djdpj Ahn D Nofx Apmocp Workpiece thickness: 8 - 60 mm Edge thickness: 0.5 - 3 mm Overall length: 5,000 mm Feed rate: 10 m/min Suitable for PU: Yes Suitable for EVA: Yes Gluing unit: Yes Miter saw unit: Yes Flush trimming unit: Yes Radius pull blade: Yes Corner copying unit: Yes Surface pull blade: Yes Includes a second set of DIA milling cutters.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019. The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units. PERFORMANCE DATA According to the total counter of the machine control system, as of October 30, 2026: • Piece counter: 24,696 • Total edge length processed: 22,186.4 m • Operating time of chain conveyor: 415 hours 58 minutes • Operating time of main switch: 4,996 hours 3 minutes The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor. EQUIPMENT • m-motion control system with a 10-inch smartouch touchscreen • Jointing unit with plunge-controlled diamond cutters • Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller • Pneumatically controlled pressure unit • Guillotine shear for roll edge material from 0.4 to 3 mm Dcodpfx Apo Ahmv Asmep • Miter saw unit with 0°/10° cutting selection • Upper and lower flush trimming and radius milling units with manual adjustment • Corner processing unit for post-forming and softforming profiles • Radius scraping blades, top and bottom • Surface scraping blades, top and bottom • Polishing units, top and bottom • Release agent spray device • Extendable workpiece support • Edge magazine with rotary table, diameter 740 mm TECHNICAL DATA • Workpiece height: 8–45 mm • Roll edge thickness: 0.4–3 mm • Feed rate: 9 m/min • Minimum workpiece length: 140 mm • During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm • Jointing depth, manually adjustable: 0–2 mm • Electrical connection: 400 V / 50 Hz INSPECTION AND PICKUP Location: Neuwied. Inspection by appointment only. Pickup only. Transportation and loading must be arranged in advance.

Condition: good (used), Year of construction: 2003, used edge banding machine Model Hebrock AKV 3003 DKF Year of manufacture 2003 Direct glue application to the workpiece including joining unit Support divider for edge material High-frequency miter saw Chip collection box (miter saw) Pneumatic roller trimming Transport chain with permanently screwed-on special chain plates Double roller pressure (ball-bearing mounted) Outrigger (extendable towards the front) Dcsdo Ahpbqopfx Apmjp Automatic central lubrication (miter saw, corner milling cutter) Quick-heating glue tank (maintenance-free, Teflon-coated) Maintenance-friendly and operator-friendly design Corner milling cutter Surface trimming blade Chip collection box (trimming blade) Max. edge thickness 8 mm min/max. workpiece thickness 10 / 40* mm Min. workpiece length approx. 200* mm Min. workpiece width approx. 70* mm Feed speed approx. 10 m/min Ready for operation in approx. 6 min Max. power consumption 12 kW Electrical connection 400 V / 3 phases / 50 Hz Dimensions (length x width) 4300 x 1400 mm Dimensions (height) 1620 mm Weight 1250 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, operating hours: 3,800 h, Well-maintained edge banding machine Homag KAL 210 Ambition 2264 from a carpentry workshop (not used in industrial production). Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2012 Operating hours: approx. 3,800 h Units: - Release agent spraying unit, top/bottom - Joining milling unit (2 x 3 kW) - Gluing unit A20 (with 2 rollers) - Trimming unit HL84 (2 x 0.8 kW, bevel/straight) - Pre-milling unit BF10 (2 x 1.5 kW) - Profiling milling unit FK11 - Profiling trimming blade PN10 - Finishing unit (glue seam trimming blade & buffing unit) Control system: Dsdpfx Apez I Efcemjcp - power Control PC22 Technical data: - Feed rate: 18-25 m/min. - Workpiece thickness: 12 - 60 mm - Edge thickness: Strips: 0.4 - 20 mm, Roll: 0.3 - 3 mm - Length: 7,845 mm #CS1

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 2306_16_4003, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: DC, edge thickness (max.): 2 mm, feed rate X-axis: 20 m/min, total height: 850 mm, total length: 1,000 mm, total width: 700 mm, overall weight: 170 kg, SCHUGOMA System TMS_8462 – mobile edge banding machine for zero-joint technology – Siemens control For sale is a mobile edge banding machine for zero-joint technology from SCHUGOMA System GmbH, model TMS_8462, manufactured in 2016. Dedpfx Ao Adqr Hspmocp The machine has hardly been used, is in very good condition, and is ready for immediate use. It features a Siemens control system and is suitable for woodworking companies, carpentry shops, and furniture manufacturers. This is an interesting opportunity for companies looking for a scarcely used machine for professional zero-joint technology. The machine can be inspected on-site by appointment. Interested parties can personally verify its condition and operational readiness.

Condition: used, Year of construction: 2019, HOMAG EDGETEQ S-380 / KDF 650 C (1650 E), year of manufacture 2019 Feed rate: 8–18 m/min. Workpiece thickness up to 60 mm, depending on application limits. Edge material: rolls 0.3–3 mm, strips 0.4–12 mm. Working height 950 mm, compressed air minimum 6 bar. Equipment: Joint milling cutters (2 × 2.2 kW), QA65 gluing unit with pressure zone, BALTI hot-melt unit, trimming unit, multi-stage and profile milling cutters, profiling and glue joint trimming blade, edge trimming unit and spraying equipment. Dcsds Ah Rcaepfx Apmsp Meter readings according to the photo dated October 22, 2026: 1,780 hours of processing time, 5,495 hours of feed time. The EDGETEQ is offered separately. Location: Basel area, Switzerland. Inspection by appointment only. Price upon request.

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Dsdpfxez Hbqlj Apmscp Type: AKV 3005 DK-F Year of manufacture: 2016 Total edge length processed: 88,570 m Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Surface scraper blade: Yes Buffing unit: Yes

Condition: used, Year of construction: 2013, machine/vehicle number: 2365, functionality: fully functional, power: 10.5 kW (14.28 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 3,200 mm, height adjustment type: mechanical, feed rate X-axis: 10 m/min, actuation type: manual, total height: 1,650 mm, total length: 4,300 mm, total width: 1,500 mm, overall weight: 750 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, The machine has always been well-maintained, and even minor repairs were carried out by Santen & Marzeion from Heede when necessary. Over the past 4 years, the edge bander has been used very little. Due to the owner's retirement, the carpentry business is being closed down, and I would like to sell this reliable Hebrock machine. The model features 2 jointing cutters, an infeed belt, a squaring shear, a flush saw, a flush router, a rounding router, and saw blades. Dcedpfx Apeznwyzemop Questions are welcome.

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed rate: approx. 10 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch EC+ control for easy operation of the machine 4 programs can be saved. Machine in Highflex version, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain conveyor central lubrication, pneumatic manual Glue pot quick-change device, one glue pot currently installed Dodpfozzqwmjx Apmecp Top pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with diamond cutters, sharpened Contact heating shoe for preheating the panel Gluing section with automatic edge feed for rolled material up to 3 mm, switchable for simultaneous and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cut or bevel cut (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfering and radius Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened; saws have been sharpened, diamond jointing cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling milling unit has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550 mm (L x W x H) Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this supplier".

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, power: 7.5 kW (10.20 HP), type of input current: three-phase, actuation type: electric, total height: 1,400 mm, total length: 5,200 mm, total width: 1,400 mm, overall weight: 1,500 kg, year of last overhaul: 2021, Edge gluing from 0.6 to 13 mm Cartridge gluing Pre-milling Fine milling Cutting twice Pull knife Smoothing Year of manufacture is estimated Machine was stored a year ago Dcodpez A Dhrofx Apmep Until that time, it was fully functional.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1000042371, functionality: fully functional, Biesse Akron 1130 J Dcodpfx Apo Ahuqpomop Machine Number 1000042371 Year of Construction 2020 Panel height mm 8 - 50 PVC/ABS mm 0.4 - 3 Multi-Velocity Kit 9 m/min Adjustable working height Variable inlet guide Side roller with idle wheels for panel support RT01 grinding group Coiling plate Infrared lamp to heat the edge SP01 hot-melt adhesive bonding group Edge pressure group on straight profiles with pressure rollers IT01 tilting adjustment unit RF01 2-axis tilting motor group AR01 multifunction rounded-edge group (edge trimmer + deburrer) RB01 edge scraper group RC01 glue scraper group SZ01 brush group ADZ01 anti-adhesive spray group Electrical and mechanical predisposition for PUR adhesive system Pro-Nesting Kit LPT01 cleaner liquid nozzle spray group

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 70 mm, workpiece length (max.): 100 mm, height adjustment type: electric, Equipment: CE marking, For sale: a professional edge banding machine, FELDER FORMAT4 tempora F600 60.06 glueBox, manufactured in 2021. The machine was purchased new and has been used by a single company since its acquisition. It is in very good condition, regularly cleaned, and serviced. It has only been used for 300,000 linear meters. Machine features: X-motion PLUS – control with an 18" Smartouch screen memory for work programs and precise adjustment of parameters feed speed of 10 / 18 m/min pre-milling unit with diamond cutters additionally reinforced pre-milling unit, 2 × 1.5 kW pre-milling unit with a height of 64 mm automatic edge feeding and the option of feeding wooden veneer strips magazine for wooden veneer strips, 120 mm pneumatic pressure unit guillotine shears for edges from rolls, 0.4–3 mm saw unit for trimming with two motors and frequency inverters multi-functional x-motion PLUS milling unit with independent upper and lower motors motorized adjustment of the unit in 2 axes unit for rounding the corners of boards, softforming and postforming profile edge trimming unit – R2 mm upper and lower polishing units sprayer for cleaning agent sprayer for anti-adhesive agent on the feed side application of lubricant for delicate edge surfaces Dcjdpfx Apo Aara Rjmop table with air cushion and retractable support extended feed table automatic central lubrication pneumatic-mechanical lock to prevent premature feeding of the next piece LED lighting Additionally: The machine has two sets of heads. One set is currently in use, while the second set is new and has not yet been sharpened. The machine is ready to operate, without the need for any additional investment to start production. The machine can be inspected and tested while in operation.