Used Extruders & extrusion lines for sale (229)

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Crjlir Neuak Nljyaeb Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Year of construction: 1994, Condition: used, weight 2,2 t Crslir Neltrg Sjyaob extruder diameter mm

Year of construction: 2008, operating hours: 40,742 h, Condition: excellent (used), WPC double strand extrusion line CINCINNATI-GREINER Parallel twin screw extruder CINCINNATI FIBEREX Argos135 Output range: 500 – 1.000 kg/h (Actual output depends on the formulation mix, the moisture content of the material processed, the extrusion die and the extrusion environment) Crelieuvdt Rjr Nyajb Adjusted motor power: 160 kW Total connected power: 427 kW Screw diameter: 135 mm, L/D = 28 Screw speed: 27 rpm Screw & barrel in tungsten carbide execution (highly wear resistant) Double venting system for barrel Force feeder for material CONPRO 5-components gravimetric dosing system PLASTICOLOR vacuum conveyors for all components except for main component Dimensions extruder (L x W x H): approx. 9.000 x 1.600 x 1.300 mm Weight: approx. 11.000 kg incl. tooling equipment for WPC decking from GREINER GREINER dual strand calibration table getCAL 11,2– 5P/4Z – DUAL A (YOM: 2008) Mounting frame (L / W / H): 2 x 11.170 / 2 x 380 / 940 – 1.040 mm Rail distance: 2 x 320 mm Center-line distance dual: 500 mm Mounting width (max.): 400 mm Height-Adjustment: 100 mm Side adjustment: (+/-) 15 mm Longitudinal adjustment: 750 mm Tilt adjustment: (+/-) 10 mm 5 pcs of vacuum pumps each 4.6 kW incl. 50 pcs of vacuum connections ABA 1/2 ” 4 pcs of cyclone pumps each 1.1 kW Dimensions (L x W x H): 11.200 x 1.580 x 1.200 mm incl. calibrators & water tanks GREINER dual strand haul-off/saw comb. getCOM 30/9-235-S/500 (YOM: 2008) Max. profile dimensions (W x H): 235 x 140 mm (each side) Contact length for caterpillars: 2 x 2.300 mm Number of pads: 2 x 55 pcs. Pad width: 235 mm (each side) Haul-off force max.: 30 kN (each side) Haul-off speed: 0.5 – 10 m/min (each side) Extrusion height adjustment via feet: 1.040 – 1.140 mm Saw-blade diameter: 500 mm Saw-motor: 3.4 kW (each side) Cutting accuracy at 6 m/min: (+/-) 2 mm Dimensions (L x W x H): 6.700 x 1.900 x 1.810 mm Weight: 4.500 kg incl. dust exhauster (each side) GREINER dual tipping table GTT 6,0 (YOM: 2008) max. profile dimensions (L x W): 6.000 x 420 mm Working height: 1.040 – 1.140 mm (adjustable) Dimensions (L x W x H): 5.500 x 1.100 x 1.125 mm Weight: 350 kg (each side) incl. roll conveyor Attention: Only serious minded inquiries from business relevant companies will be answered. Full company information is mandatory!

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: MP-1406-90, The extruder is a single-screw extruder with an output of max. 120 kg/h. The screw diameter is 90mm. PVC pipes up to 150mm were produced on the system. The system is fully functional. It was replaced by a new one with a larger output. The tools and calibrators are not included. Crjloufxxreir Nyajb

Year of construction: 1994, Condition: good (used), Max reel diameter 1600mm Die gap 1.25-2.26 Die diameter 350mm Crolir Njp Du A Tjyaeb Thickness 25-130 micron Speed 250kg/hr

Condition: used, Year of construction: 1998, Single screw extruder Crsleubu Izjir Nyasb

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG BA KEP 90-26.3-S 1x transmission gear BARMAG 9E4-11-103/Z 1x drive motor AEG G 16.04 with external ventilation 460V, 112A, 46.7KW, 3150rpm, Err.330V, 2.21A 1x dosing unit SCHOLZ incl. Feed hopper 1x control unit System features: - Single-screw extruder, year of manufacture approx. 1970 Crjlir Nouakzzeyasb - Throughput 200kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90mm - Screw length 2769.5mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Material screw 1.8550, nitrided - Technical documents The system is available 4x, Subject to prior sale Please send inquiries only by email Note: The machine is still installed and can be inspected on site. The buyer must remove it himself and organize shipping. This is not part of the offer price.

Year of construction: 2022, Condition: new, Functionality: fully functional, machine/vehicle number: ZE60R, Sell spare parts for ZE60R twin-screw extruder. IMMEDIATELY AVAILABLE!!! The following screw elements are available immediately: Croloqwdtdeir Nyaeb 2 pcs. ERZ-45/1/2 4 pcs. ERZ-60/0,5/2R 2 pcs. ERZ-60/1/2 2 pcs. ERZ-75/1/2 4 pcs. ERZ-KB75/5/60L 2 pcs. ERZ-KB75/5/90 Material version: Z9 Price on request!

Year of construction: 2008, operating hours: 40,742 h, Condition: excellent (used), Functionality: fully functional, Parallel twin screw extruder CINCINNATI FIBEREX Argos135 Output rate: up to 1.500 kg (depending on material, extrusion die and extrusion conditions) Adjusted motor power: 160 kW Total connected power: 427 kW Screw diameter: 135 mm, L/D = 28 Screw speed: 27 U/min Crelir Nysuvdtweajb Double venting system on barrel Screws & barrel in tungsten carbide execution (highly wear resistant) Force feeder for material Dimensions extruder (L x W x H): approx. 9.000 x 1.600 x 1.300 mm, Weight: approx. 11.000 kg Spare second-hand screws & barrel in tungsten-carbide are available as well

Year of construction: 2022, operating hours: 2,000 h, Condition: excellent (used), Functionality: fully functional, Capacity 1100-1200 kg/h (LDPE) Cslirou Tdhbe Nyaerb Feeding conveyor with metal detector Upgrad extruder vacuum pump Laser filter LF_2_364 Hot die face pelletising system Big bag fill unit with transport system

Year of construction: 2005, Condition: good (used), Functionality: fully functional, Single-screw extruder Manufacturer: KOMAX Type: Elipse PRO 45 Single screw Ø45mm 26LD Year : 2005 Motor: 15kW 12800 operating hours Crelireu Rn T Ss Nyaeb

Condition: good (used), Year of construction: 2013, Main Extruder / Co Extruder Crelirsubuzbj Nyaob

Condition: used, Used powder paint line. The line cosist of: - container mixer Mixaco, typ CM300, with 3 x ss tank 240Ltr new.: 1992 - extruder Buss PLK46P, 18 kW - Cooling conveyer Buss, typ PA 46, 400mm wide x approx.420mm long Crolir Njvxrulsyaob - mill Hosokawa Mikropul, typ ACM10, new: 1992 - dosing device Gericke, typ G1 D Y6, new: 1994 - feeding device Hosokawa Mikropul, typ RAL4, new: 1994 - pressure filter , Hosokawa Mikropul/Filba , typ: 18 HR 6 P8R 11, new: 1994 - stainles steel cyclone diam.: 300 mm - rotary screen AZO, typ E 240, new 1993 - pocket filter, made Tatra filtr

Condition: like new (used), Year of construction: 2023, power: 255 kW (346.70 HP), ø 5-50 mm; 30 m/min 1.5 Kw Core diameter 400-1100 mm, collar width 100-400 mm. Many extras Csleuu H Emjir Nyasrb

Year of construction: 2005, Condition: refurbished (used), Functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones Crjlirsuziyho Nyaeb - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Year of construction: 1990, Condition: used, Twin screw extruder Creleubuywjir Nyaob

Condition: used, Used powder paint line. The line consist of: Colirevxrppo Nyaorb - container mixer Mixaco, typ CM300, with 4 x ss tank 240Ltr - extruder Coperion, ZSK 34, new.: 2006 - Cooling Conveyer BBA Cooler, typ CC-80/30, 800mm wide x approx.3000mm long - mill Hosokawa Mikropul, typ ACM10, new: 1994 - dosing device Gericke, typ G1 D Y6, new: 1994 - feeding device Hosokawa Mikropul, typ RAL4, new: 1994 - pressure filter , Hosokawa Mikropul/Filba , typ: 18 HR 6 P8R 11, new: 1994 - stainles steel cyclone diam.: 300 mm - rotary screen AZO, typ E 240 - pocket filter Tatra Filter

Year of construction: 2007, Condition: used, ø 90-250 mm Cslir Noubbqcsyasrb All WZ from 90-250 mm SDR 17, SDR 11 incl. acc. to EN 12 201, DIN 8074-75, ISO

Year of construction: 2016, operating hours: 35,000 h, Condition: refurbished (used), Functionality: fully functional, Twin parallel screw extruder Ø107mm 22LD - Manufacturer: WEBER - Type: DS 11 - Year: 2016 - Double parallel screws ø107mm 22D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 78kW - Up to 400kg/h profile - 700kg/h tubes - 35.000 hours in operation Crolir Njuxc R Ieyaeb

Year of construction: 2011, Condition: good (used), Single screw extruder Cslir Nysubux Tsasrb

Year of construction: 2014, Condition: used, Used powder coating line. Shutdown in 2024. - container mixer Mixaco, typ CM1000-MT, with 4 x ss tank 800Ltr new.: 2014 - extruder Coperion, ZSK 43 MV, new.: 2014 - SBS Cooling Conveyer 800mm wide x 5000mm long - mill Hosokawa Alpine, typ ACM40 EC CL, new: 2014 - dosing device Gericke, typ GL D 7, new: 2014 - feeding device Hosokawa, new: 2014 - pressure filter Hosokawa Alpine, new: 2014 - stainles steel cyclone diam.: 500 mm - 2x rotary screen AZO, typ E 240 - pocket filter, with 45 kW el. motor - cooling unit Climaveneta typ NX/K 0914P - cooling unit Climaveneta typ NX/K 0552P Crelevxrm Ueir Nyajb

Year of construction: 1998, Condition: not inspected (used), ø 160-400 mm Colireubbc So Nyaerb Various tools included

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine Cslsuhpiyeir Nyaerb

Year of construction: 2007, operating hours: 450 h, Condition: as good as new (ex-display), Corrugator (without tools) suitable for pipes up to 315 mm Cjlir Nyomn Iczsaerb Manufacturer: Fränkische Type: FDC 315/36V Year: 2007 (never used) Technical basic data: Max. Product diameter: 315 mm Number of mould blocks: 36 Electric: 3 x 400V 50 Hz + N + PE Extrusion height: 1100 mm Serial no.: MV-2034 Operating hours: 450 h / only mechanical Condition: very good, never used in the production, only for mechanical demonstration.

Year of construction: 2000, operating hours: 30,500 h, Condition: refurbished (used), - Type : CINCINNATI TITAN 68 Crolisigrb Dor Nyaob - Year : 2000 - Conical screws - Analog controls - Screws & barrel : In good conditions - Flow rate: 250kg/h - Good general state We are able to supply all spare parts if required and provide on-site maintenance.