Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, workpiece weight (max.): 100 kg, gear diameter: 300 mm, controller model: Optronic CNC D140, center height: 250 mm, table length: 2,300 mm, TECHNICAL DETAILS Centre height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm Gear diameter: 300 mm Module range: 0.5 mm - 8 mm Ibjdpfsx Hzrzex Ah Ujf Helix angle: 35° Maximum workpiece weight: 100 kg MACHINE DETAILS Control type: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Number of transport packages: 5

Condition: good (used), machine/vehicle number: 29176, Capacity to Cut straight bevel gears and pinions up to 24″ Diameter, 3.5″ face-width. Maximum cone distance (2.75″ 3.5″ face) 12″, Max. Cone distance (1″ face) 11.1/8″. Ibsdpfeixt Rpox Ah Usf Minimum Cone distance 0″. Max. pitch angle (angular gears) 105 degrees. Max. Pitch angle (90-deg shafts) 84 degrees/18min. Min. pitch angle 5 degrees/42min. Maximum Ratio 10/1. Maximum Face width 3.5″. Maximum Stroke length 0.5″ 4.5″. Index range, Inclusive 5-100 (+up to 200). Maximum pitch, nominal 3 DP (8.5 module), Diameter of hole in work spindle (large end) 3.906″, Spindle taper per foot 0.609″. Depth of spindle taper 6″. Diameter of spindle thru-hole 3.063″. Spindle nose to centre line 2.5” to 15″, 13 x tool speeds in strokes per Min. 64 to 495. 16 x feeds from 10 seconds to 2 minutes, 11 seconds per tooth. Machine Serial No. S/N 24268. Machine complete with Setting Gauges, Change Gears, Large selection of Cutters and Cutter Holders.

Condition: used, Year of construction: 2001, tip circle diameter 1000 mm root circle diameter 50 mm max. module 18 mm min. module 1 mm max. wheel diameter 1000 mm gear width 630 mm Profile height max. 41 mm helical angle (left/right) max. 45 ° table diameter 720 mm max. table load 1500 kg grinding wheel diam. min/max. 180 / 400 mm Ibsdpswp S Thofx Ah Usf grinding wheel width 60 (45/30) mm grinding spindle speed 0 - 3100 U/min total connected load 30 kVa

Year of construction: 1963, condition: used, max. wheel diameter 2000 mm gear width 0 mm max. module 0 Weight ca 700 kg dimensions of the machine ca. 2x1,2x1,5 m uncomplete machine body with drive motor. drive unit fully functional. Without Ibsdpfx Ajd Ngrpsh Uof grinding unit.

Condition: used, max. wheel diameter 1800 mm gear width 725 mm max. module 5 Control Siemens 840D sl axial travel 725 mm turning speed range - stepless 44 - 440 U/min cutter diameter max. 240 mm cutter width - max. 300 mm Ibedpfx Ahjvylirs Ujf table diameter 1500 mm boring diameter 350 mm weight of the machine ca. 27 t dimensions of the machine ca. 8,8 x 6,1 x 3,25 m Equipment / Accessories: - max. distance from clamping table to counterholder/to center of milling spindle: 1045 mm - milling spindle: - max. axis distance between milling spindle and clamping spindle with/without counterholder: 1200 mm - min. axis distance between milling spindle and clamping spindle with/without counterholder: 525 mm - quick cutter change device - chip extraction device - milling arbors - documentation

Condition: used, used grinding spindle with wear marks. Ibjdpfx Aod Ihbleh Ujf

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm Isdpfx Ahexylm Ho Uebf workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. Iodovn Unyjpfx Ah Usbf

Condition: used, Year of construction: 1984, max. wheel diameter 1500 mm gear width 700 mm max. module 5 Isdpovvcgtofx Ah Ujbf Control Liebherr LH90 smallest number of teeth to be hobbed 6 milling head: Motorfräskopf milling spindle speeds (infinitely variable) 44 - 440 U/min milling head -swivable +/- 45 ° table diameter 1100 mm max. table load 8000 kg total power requirement 66 kVA Equipment / Accessories: - chip extraction device - milling arbors - documentation

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm Ijdow Rf S Sepfx Ah Ujbf max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Year of construction: 2002, condition: used, max. wheel diameter 275 mm Isdjgtvbpjpfx Ah Usbf gear width 55 mm max. module 6 min. module 1,5 control Sinumerik 840C tooth width 5,5 mm spiral angle 0/60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 1/min total power requirement 100 kW weight of the machine ca. 16700 kg dimensions of the machine ca. 5200x2300x2400 mm

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW Ibodpfx Ahjukitxo Uof weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Ijdpfjd Il R Asx Ah Ujbf Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -

Year of construction: 2007, condition: used, max. wheel diameter 400 mm gear width - mm max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min Iodsgr Harepfx Ah Uobf dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Year of construction: 2014, condition: used, inclination 0,5 - 6,3 ° speed 700 m/min stroke 100 mm max. diameter 270 mm pitch angle +/- 45 ° Cutter Spindle Diameter 68,23 mm table height over floor 930 mm weight of the machine ca. 3 t Isdoxukrwjpfx Ah Uobf dimensions of the machine ca. 1,35 x 1,75 x 2,2 m

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Iedpfsvu E Spsx Ah Uebf Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation

Condition: used, Year of construction: 2006, max. wheel diameter 2 - 45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 weight of the machine ca. 2,2 t control Fanuc 18i-MB max. workpiece length 250 mm weight of the machine ca. 2200 kg Milling cycles: - straight, helical, crowned gearing - radial, radial-axial, climb and conventional milling, roughing, finishing - worm wheels, straight-toothed bevel wheels, face gearing (option: only in partial process) Technical Details: - maximum workpiece length 250 mm - maximum toothing length 150 mm - maximum module in steel 1 mm (gear hobbing) - maximum module in steel 1.5 mm (worm milling) - maximum module in steel 0.5 mm (bevel gear hobbing) - milling cutter diameter 16-32 mm (gear hobbing) - milling cutter diameter 40-63 mm (worm milling) - maximum setting angle of milling head ±45 deg. (Rolling) - maximum setting angle of milling head ±30 deg. (worm milling) - Shift travel 34 mm (CNC axis) Ijdpjvq Sfzsfx Ah Usbf - Collet / retraction mandrel W20 - maximum speed of the workpiece spindle 770 rpm. - milling spindle drive 0.55 kW - Maximum speed of the milling spindle 8000 rpm. CNC axis drives: -X-axis = plunge travel 80 mm -Z-axis = longitudinal feed travel 190 mm -C-axis = workpiece axis 360 deg. -Rapid traverse X/Z 6 m/min. -Hydraulic unit 0.37 kW -Dimensions 2100 x 1440 x 1700 (LxWxH) Options: -CNC shift axis 34 mm -Adjustment angle with CNC axis -Deburring device Accessories: - spiral conveyor

Condition: used, Year of construction: 2003, max. wheel diameter 600 mm gear width 92 mm max. module 8 mm Iodpfx Asvzhfleh Uobf max. ram stroke 100 mm table diameter 400 mm workpiece dia. 600 mm Shockable standard module max. 8 mm angle adjustable from - to -0,5 / +0,5 Grad stroke range 80 - 1200 Hübe/min feed radial axis machine column 1 - 3750 mm/min Accessories: - Various stop blade holders - Various clamping devices

Condition: used, Year of construction: 1992, max. wheel diameter 175 mm gear width 710 mm max. module 4,5 min. module 0,5 Ibodevzhfrepfx Ah Usf weight 4,5 t total power requirement 10,5 kW Equipment/accessories: - Milling arbors - Clamping devices - Documentation

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices Ibsdpfxsvzhf Se Ah Usf - Documentation

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Ibodpfxew Rf S Eo Ah Uef Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm max. module 20 (25) mm min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA helical angle -45 / + 120 ° Ijdpfx Ahow Rrbyo Ujbf weight of the machine ca. 10 t

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN Ibedpfew Rf R Uox Ah Ujf weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Iodpfx Ahow Rrb He Usbf Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2007, max. workpiece diameter 800 mm profile depth 100 mm control Siemens Sinumerik 840 D x-travel 650 mm y-travel 300 mm z-travel 1300 mm spindle turning speed - stepless 400 - 4000 U/min table turning speeds 0 - 10 U/min total power requirement 110 kVa dimensions of the machine ca. 9,48 x 6,13 x 5,00 m weight of the machine ca. 24,5 t Tool: - Largest grinding wheel diameter 450 mm - Largest grinding wheel width 160 mm Feed rates: - X-axis 1 to 3000 mm/min - Y-axis 1 to 5000 mm/min - Z-axis 1 to 6000 mm/min Equipment/accessories: - Counterholder - Grinding oil treatment system Ibsdpfew Rrckjx Ah Ujf - Oil mist extraction - Measuring probe - Dresser - Technical documentation