Stange Werkzeugmaschinen GmbH & Co. KG

Condition: used, Static Material Universal Testing Machine AllroundLine, Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type Z010 / TN2S Year of manufacture: 1998 Type: BZ010TN2S Numbers: 140016/98, 434333 Design: Table-top testing machine Test force: 10 kN (1000 kg) Test space height: 1037 mm Test space width: 440 mm Crosshead speed: mm/min Drive path resolution: 0.0625 μm Repeatability: ±2 μm Motor power: 500 W Power supply: 230 V, 50 Hz Power consumption: 800 VA Interface: RS232 - For tensile, compression, and bending tests on material specimens, parts and components - 1 pc. AST pressure transducer Dolhcdswxy D Hewzouw The machine is sold without PC and without software, only the pressure transducer is installed. Space requirement (W x D x H): 860 x 260 x 1305 mm Weight: 130 kg In very good condition

Condition: used, Immersion cooler, two-stage cooling suitable for Mettler Toledo DSC8822e Cooling unit, water chiller, chiller, laboratory chiller, cooler, immersion cooler THERMO HAAKE type EK90 / MT Type No.: 003-4403 Serial No.: 1200001655/004 Year of manufacture: 2000 Operating temperature range: -90 ... + 40 °C Cooling capacity: 300 W (at 20 °C) Refrigerants: R23 + R404A Dujlhcdoww I Siowzew Hose length: 2000 mm Immersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e) Mains connection: 230 Volt, 50 Hz Power consumption: approx. 1 kW - Cooling circuit with 2 compressors Required space W x D x H: 380 x 460 x 490 mm Weight: 60 kg Compatible with Mettler Toledo DSC822e, available in our shop under stock number 62131

Condition: used, Conveyor belt, belt conveyor, band conveyor, MFP conveyor technology Machine no.: 20084 Year of manufacture: 2021 Usable length: 2400 mm Belt width: 620 mm Usable width: 560 mm Belt length: approx. 5000 mm Frame profile height: 70 mm Deflection roller diameter: 20 mm Belt speed: 20 m/min. to 48 m/min. Conveyor belt height: approx. 970 mm Motor power: 140 watts Mains connection: 230 volts, 50 Hz - Infinitely adjustable belt speed via potentiometer on ROFRE frequency converter, type 897 - Forward and reverse operation - Belt drive via INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate beneath the conveyor belt Doljwwwp Rjhcdwzsuw - 1 piece height-adjustable support frame with hand crank, conveyor belt height ca. 970 to 1170 mm - Subframe mounted on steel plate, length 760 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as a transport support - Fully movable on caster wheels Overall dimensions L x W x H: 2480 x 850 x 1000 mm Weight: 250 kg Very good condition

Condition: used, Thermal Analysis Controller Set, Measuring Cell Controller, Differential Scanning Calorimeter (DSC) Differential Scanning Calorimeter, Thermo Mechanical Analyzer, Thermobalance, Laboratory Measuring Device, Heat Flow Measurement, Temperature Measurement, PC Interface, TC15 TA Controller + DSC20S + STARe V8.01 + Mettler Toledo Sealing Press Thermal analysis set consisting of the following components: - Mettler Toledo TC15 Thermal Analysis Controller Djlhcewwa Agjdwzjuw - Mettler Toledo Measuring Cell DSC 20 - Mettler Toledo Sealing Press - PC with Windows 2000 and STARe Software V.8.01 Mettler Toledo TC15 Thermal Analysis Controller: The TC15 TA Controller is the interface between the personal computer of the STARe system and the measurement cells DSC20, DSC25, DSC27HP, DSC30, TMA40, or TG50: - The TA Controller receives the calibration data for the connected measuring cell from the personal computer's database. - A method with its segments is sent from the personal computer to the TA Controller. - The TA Controller keypad is used to start an experiment. - The TA Controller regulates the furnace temperature in the measuring cell. - The TA Controller records and stores the curve data and transmits it to the personal computer. - The TA Controller is suitable for measurements from -170 to 600°C. With the TA Controller, the various measuring cells can be operated alternately without recalibration. The calibration data is stored on the personal computer. Type TC11 SNR L61779 FNR 28000 133 10 Power supply 230 V AC / 50 Hz Rated current 3.5 A Mettler Toledo DSC 20 Measuring Cell: The DSC20 enables DSC measurements from ambient temperature up to 600 °C. If the DSC20 is placed in a deep freezer, measurements from -20 °C are possible. The measurement is performed according to the Boersma or heat flow principle. SNR L55236 FNR 29210 129 10 Temperature range Ambient temperature up to 600°C (from -20°C with deep freezer) Reproducibility ± 0.2°C Heating rate 0...100°C/min Cooling rate: - Unregulated from 600 to 100°C 15 min - Regulated 20°C/min to 200°C - 10°C/min to 100°C Cooling medium Air (fan) Dimensions TC15 W x D x H 400 x 545 x 170 mm Dimensions DSC20 W x D x H 160 x 230 x 240 mm Total weight approx. 40 kg Matching Mettler Toledo TMA40 available in our shop under stock number: 62133

Condition: used, 6-Axis Industrial Robot MOTOMAN / YASKAWA Type YR-UP50N-A00 Order No. S5Q552-1-3 Year of Manufacture: 2005 Robot Serial No. RH9540-5612-2 with Controller MOTOMAN Type: NX 100 Handling Weight = Maximum Payload: 50 kg Working Radius: 2046 mm Working Range: Axis 1 - S-axis (turning): ±180° Axis 2 - L-axis (lower arm): +135°, -90° Axis 3 - U-axis (upper arm): +280°, -160° Axis 4 - R-axis (wrist roll): ±360° Axis 5 - B-axis (wrist pitch): ±125° Axis 6 - T-axis (wrist twist): ±360° Maximum Speed: Axis 1 - S-axis: 170°/s Axis 2 - L-axis: 170°/s Dslhswwa Aaocdwzjuw Axis 3 - U-axis: 170°/s Axis 4 - R-axis: 250°/s Axis 5 - B-axis: 250°/s Axis 6 - T-axis: 350°/s - MOTOMAN NX100 controller - Free-standing control cabinet - Connecting cable robot to control cabinet approx. 10 meters - Suitable for handling, palletizing, and welding tasks - Power supply: 400 Volt, 50 Hz - Robot dimensions (W x D x H): 1500 x 1500 x 1900 mm - Control cabinet dimensions (W x D x H): 800 x 800 x 1000 mm - Power-on hours (control voltage): 6,444 h - Servo operating hours (servo ready to operate): 3,467 h - Playback time: 3,277 h - Motion time: 1,161 h - Vacuum gripper on the robot with 6 adjustable suction pads, Ø 65 mm, for handling sheet metal parts (currently set to 450 x 400 mm in the photos) Net weight of robot: 550 kg + steel plate 1500 x 1500 x 20 mm with pedestal 700 kg Total weight robot + steel plate with pedestal: 1,250 kg Weight of control cabinet: 200 kg Good condition

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Open circuit voltage: 1.8 to 3.6 volts Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz Dueljwwaz Njhcdwzjw - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Space required (L x W x H): 1100 x 600 x 1200 mm Weight: 200 kg Good condition

Condition: used, Horizontal mitre band saw in swivel bow design JAESPA Type W 320 G Serial No. 18793 / 99 Year of manufacture: 1999 Cutting range at 90° (round) Ø 320 mm Cutting capacity at 90° (square) 320 x 320 mm Cutting range at 90° (flat) 460 x 200 mm Cutting range at 45° (round) Ø 290 mm Cutting range at 45° (flat) 290 x 220 mm Cutting capacity at 45° (square) 240 x 240 mm Cutting range at 30° (round) Ø 200 mm Cutting capacity at 30° (square) 200 x 200 mm Cutting range at 30° (flat) 220 x 200 mm Bandsaw blade dimensions 4120 x 27 x 0.9 mm Bandsaw blade speed approx. 50 m/min Material feed height approx. 630 mm Saw drive motor power 1.5 kW Power supply 400 Volt, 50 Hz - Quick mitre adjustment via swivelling saw bow with rotary table and clamping - Infinitely variable mitre cutting 30° - 90° - Saw bow lowering by own weight via hydraulic brake cylinder Delhewwaz Aecdwzeuw - Quick-release vice with eccentric clamping - Coolant system integrated in the machine base - Emergency stop mushroom pushbutton Required space (L x W x H) 2000 x 1150 x 1800 mm Weight 975 kg

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base Duolhowvv Rwscdwzjw - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Dslhcowvv Rqjdwzeuw Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Dolhswva I Hecdwzsuw Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Lease Offer for a Complete System Laser Cutting System + Nitrogen Generator Fiber laser, flatbed fiber laser cutting system with pipe cutting capability Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Model: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/h - Polarization random Duelhowt Dynjcdwzsw - Collimation focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameters in single mode: 50, 100, 200, 300 µm - Max. total power consumption: 42 kW - Machine power consumption: 20 kW - Filter power consumption: 4 kW - Chiller power consumption: 10+1 kW - Resonator power consumption: 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis: 3060 mm Working area Y-axis: 1530 mm Working area Z-axis: 160 mm Max. sheet size: 3048 x 1524 mm Max. sheet weight: 200 kg/m² - IPG fiber laser resonator adjacent - Water recirculation chiller for laser source and cutting head adjacent - Under-table extraction and filter unit adjacent - With dual shuttle table - Pipe laser with four-jaw chuck and large spindle bore next to the flatbed - Steadies for pipe laser on linear guides - With CAD software - With nesting software - With pipe laser software Very good condition Also included: Nitrogen generator with high-pressure piston compressor Booster compressor Nitrogen generator manufacturer: AIRCO High-pressure compressor manufacturer: Lenhard & Wagner

Condition: used, Thermo Mechanical Analyzer Thermo Mechanical Analyzer, thermobalance, laboratory measuring device, heat flow measurement, temperature measurement METTLER TOLEDO Type TMA 40 FNR. 29202 SNr. C55106 In thermomechanical analysis, the change in length of a sample exposed to a temperature program is measured. The change in length is monitored using a displacement sensor, LVDT. Duolhcdwowrtb Sjzow The temperature range extends from ambient temperature to 1000 °C, with the low temperature accessory -100...+300 °C. Temperature range ambient temperature to 1000 °C Accuracy ± 2 °C Heating and cooling rates 0...100 °C/min Cooling time from 1000 to 100 °C 18 min Cooling method air (fan) Weighing range 0...5100 mg Resolution 1 μg up to 99,999 mg, 10 μg up to 999,999 mg, 100 μg over 1 g Noise (50 °C isothermal) 4 μg peak-to-peak over 5 min. Interface RS-232C - Purge gas connection for inert and reactive gases. No corrosive gases may be used. - Flammable gases may only be used with inert gas in a non-explosive mixture. - The TMA 40 is an option module that is often operated on a Mettler Toledo TC 15. Dimensions W x D x H 285 x 380 x 480 mm Weight 15 kg The TMA 40 is an option module that is often operated on a Mettler Toledo TC 15. Suitable Mettler Toledo TC 15 available in our shop under storage number: 62134

Condition: used, Micro balance, laboratory scale, precision scale, fine scale, scale, Micro Balance METTLER TOLEDO Type XS3DU SNR 1129453969 TDNR 18.11.2.1518.756-1 Functions: Weighing, statistics, formulation, density, percentage weighing, piece counting Maximum load 3.1 g Readability 0.01 mg Tare range (from ... to) 0 … 3.1 g Maximum load in fine range 800 mg Readability in fine range 0.001 mg Repeatability (at rated load) 6 µg (3 g) Repeatability in fine range (at rated load) 0.8 µg (0.2 g) Linearity deviation 10 µg (0.5 g) Corner load deviation (test load) 4 µg (1 g) Sensitivity deviation (test weight) 45 µg (3 g) Temperature drift of sensitivity 0.0001 %/°C Stability of sensitivity 0.0001 %/a Repeatability (at low load) 3 µg (0.2 g) Repeatability, fine range (at low load) 0.2 g (0.5 µg) Linearity deviation 3 µg (3 g) Corner load deviation (test load) 1.2 µg Sensitivity deviation (test weight) 9 µg (3 g) Minimum sample weight (according to USP) 6 mg Minimum sample weight (according to USP) in fine range 1 mg Minimum sample weight (U = 1 %, k = 2) 0.6 mg Minimum sample weight (U = 1 %, k = 2) in fine range 0.1 mg Stabilization time 6 s Stabilization time in fine range 10 s Interface update rate 23 1/s Dujlhcdjwrtbxowzow Draft shield diameter 68 mm Usable height of draft shield 55 mm Weighing pan diameter 25 mm - LCD touchscreen - RS232C interface - Printer type RS-P42 - Tare function Power adapter Primary: 100 - 240 V AC, 50/60 Hz Secondary: 12 V DC, 2.5 A Terminal/evaluation device dimensions L x W x H 285 x 195 x 80 mm Weigh cell dimensions L x W x H 288 x 128 x 114 mm Printer dimensions L x W x H 210 x 150 x 90 mm Total weight approx. 7 kg good condition

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 17565 Year of manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min. Conveyor belt height: approx. 1120 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz. - Infinitely variable belt speed via potentiometer on ROFRE frequency converter, type 897 - Right/left operation - Belt drive via INTERROLL drum motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable HAACON underframe with hand crank, conveyor belt height approx. 950 to 1150 mm - HAACON underframe mounted on steel plate length 750 mm x width 500 mm x thickness 30 mm, Dujlhcjwrihnjdwzow - 1 piece fixed support foot without height adjustment as a transport support - Fully mobile on swivel castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg good condition

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run Duolhcdewqg Enjwzow - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: used, Conveyor belt, belt conveyor, MOVING (Sweden) Type BGL22 Order No.: 4019584 Year of manufacture: 2004 Usable length: 3900 mm Belt width: 800 mm Belt length: approx. 8100 mm Frame profile height: 120 mm Deflection roller diameter: 105 mm Belt speed: approx. 10 m/min. Conveyor belt height: approx. 900 to 1300 mm Motor power: 0.25 kW Power connection: 400 volts, 50 Hz. - Drive via ABB/geared motor - mobile on 6 fixed casters with brake - Inclined position of the conveyor belt by different frame profile heights of the 3 mobile support legs Duolewp Sufshcdwzjw - all 3 mobile support legs with stepless height adjustment via elongated holes with clamping screw - stable steel construction with complete steel plate under the conveyor belt Overall dimensions L x W x H: 4000 x 1250 x 1300 mm Weight: 300 kg good condition

Condition: used, Universal tool milling machine HERMLE Type UWF 802 M Machine No.: 10641 Year of manufacture: 1994 Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle mount ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed X and Y 2 to 1600 mm/min stepless Feed Z 2 to 1000 mm/min stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Power connection 400 volts, 50 Hz - Heidenhain TNC 124 control, NC software: 246 160 20, PLC software: 278 021 08 - Spindle speed in 18 gear steps - Vertical milling head pivotable to the right and left - Hydro-mechanical tool clamping vertical and horizontal - automatic central lubrication - Coolant unit next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and circuit diagram Space required L x W x H 2000 x 1800 x 1950 mm Dslhowp St Ujcdwzsuw Weight approx. 1750 kg very good condition

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP conveyor technology Machine No.: 17566 Year of manufacture: 2018 Usable length: 3100 mm Belt width: 490 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Dujlhcowp St Isdwzow Deflection roller diameter: 20 mm Belt speed: 1.5 m/min. to 50 m/min. Conveyor belt height: approx. 1150 mm Motor power: 140 watts Power connection: 230 volts, 50 Hz. - stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - right-left rotation - belt drive via INTERROLL tube motor - stable steel sheet construction with closed steel plate under the conveyor belt - 1 unit of height-adjustable HAACON underframe with hand crank, conveyor belt height approx. 950 to 1150 mm - HAACON underframe mounted on steel plate length 650 mm x width 500 mm x thickness 30 mm, - 1 unit of fixed support foot without height adjustment as a transport support - fully mobile on fixed casters Overall dimensions L x W x H: 3180 x 700 x 1150 mm Weight: 240 kg good condition

Condition: used, ABUS Type VS 660 Pillar-Mounted Jib Crane (4000 kg x 4500 mm) Year of Manufacture: 1996 Load Capacity: 4000 kg Duelhcdwewlvftjzow Swivel Range: 360° Boom Radius to Column Center: Approx. 5010 mm Crane Hook Radius to Column Center: Approx. 4500 mm Overall Height: 5800 mm (complete) Height to Bottom Edge of Boom: 5190 mm Hook Height (factory specification): Max. 4707 mm Column Diameter: Ø 660 mm - Boom Profile: Double T-Steel (Height 555 x Width 210 mm) - Boom Electrically Slewing via Gear Motor - Electric Trolley Travel - Purple Paint Finish - Only 18.2 Operating Hours Foundation Flange: Ø 870 mm with 24 Holes: Ø 32 mm Transport Space Required: L W x H 5500 x 2300 x 1800 mm Dependent weight approx. 3000 kg Very good condition Hoist, electric wire rope hoist, ABUS Type GM 1040 Serial No. 55692 4/734605, built in December 1996 Load capacity: 4000 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Fine lifting speed: 0.66 meters/min. - only 18.2 operating hours Very good condition

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Djlhcdwswk Nxqezsuw Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Duelowkvi Nohcdwzsw Weight: 250 kg good condition

Condition: used, Safe - Strongroom STRACKE Djlhcdewki A Aewzsuw Security level / resistance grade III 1 key lock VDS class 2(B) 1 mechanical code lock 2(B) with reinforced keyhole protection Internal dimensions: W=650 mm, H=1300 mm, D=445 mm Interior with partition wall and collecting device - Bolt system with 3-way locking - Key lock with one key (2 keys available) - With deposit chute Ø 160 mm - 19 deposit containers made of plastic Ø140 x 270 mm - Operating manual External dimensions: W=790 mm, D=675 mm, H=1440/1800 mm Weight: 1330 kg

Condition: used, TRIGO Type SCS 120-250 Mechanical NC Machine Vice Precision machine vice, clamp Jaw width 120 mm Jaw height 20 / 55 mm Clamping width 0 to 190 mm Clamping range with 55 mm jaw height approx. 0 to 40 and 32 to 88 mm Clamping range with 20 mm jaw height approx. 89 to 138 and 132 to 190 mm Clamping pressure approx. 4 tons Top jaw guide groove 20 mm Guideway height 80 mm Height with base jaws 100 mm Bed length 250 mm - Mechanical precision machine vise - 1 fixed jaw mount with 2 mounting positions (50 mm spacing) - 1 movable jaw mount with approx. 55 mm adjustment - Adjustment via trapezoidal spindle with 14 mm hexagon drive (Allen key) - Special grip reversible jaws with 3 mm grip step on both sides, pointed design, for soft materials, type 87.120 - Sturdy base body, ground on all sides - Can be clamped horizontally, vertically, or laterally - Guideway with 18 mm guide groove, 6x M12, hole pattern 100/100 x 80 mm Dimensions L x W x H 260 x 120 x 155 mm Delhcdswki Avjwzsuw Weight: 22.5 kg good condition

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Dslhewki Apecdwzouw Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius Duelhcdwjwhf Hfjzjw 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition