KK-Industries GmbH

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440 Lrjlhccqsv Rtg Teloi

Condition: used, messurements (LxWxH): 1785 x 600 x 1200swing diameter: ca 260centre height: 130weight approx.: 770Technical Data:Center distance: approx. 600 mm Center height: approx. 130 mm Swing over bed: approx. 260 mm Spindle bore: approx. 28 mm Spindle speeds (infinitely variable): approx. 52 – 2,250 RPM Drive power: approx. 1.62 kW Lrjlhccjv Ncn Deqlsi Dimensions: approx. 1,785 mm (length) x 600 mm (width) x 1,200 mm (height) Weight: approx. 770 kg Features:Three-jaw chuck with a diameter of 140 mm Four-tool steel holder Tailstock Drill chuck

Condition: used, sheet thickness: 6messurements (LxWxH): 900 x 900 x 1150weight approx.: 850 Lrelhccjv Ncn Roqloi

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Saw Blade Diameter: 355 mm Speeds: 1420/2880 rpm Drive: 3.7/4.5 kW Includes: Coolant system Dimensions: 990/1140/H1535 mm Weight: 596 kg Lolsv Ncpbehccqlsri

Condition: used, sheet thickness: 3total power requirements: 20machine no.: 557throat depth: 200motor: 2,2sheet length: 1500stroke: 56 Lelev H Hfnshccqljri Machine is in good conditions.

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Lrslhcov Hin Eocqloi Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Condition: new, pressure: 60Column clearance: 900 x 300stroke: 400daylight: 900motor power: 3Speed : 8Speed : 13messurements (LxWxH): 1500 x 850 x 2450Standard Equipment: High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. CE certified Pressure adjustment 1-year warranty Lslhccov Akw Hoqlori Pressure gauge (manometer) User manual 

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440 CNC Press Brake DURMA AD-S 40400 Year of Manufacture: 2011 Very Good Condition CE Lasersafe New Price: approx. 139,000 EURO Special Price from Böheimkirchen location Technical Data: - Bending Length: 4,050 mm - Pressing Force: 400 tons - Axes: Y1 / Y2, X, R, and CNC crowning - Upper Tool: 1010/A/75° split, cranked - Die: Multi V die - Crowning: CNC controlled - Rear Gauge: CNC controlled Lrelhcevfy Sxecqloi - Motor Power: 37 kW - Crowning Device: Motorized, adjustable via CNC control - Sheet Metal Support Arms: 2 pieces on linear guides - Laser Protection Device: On the upper beam - Operating Manual: Included

Condition: used, Year of construction: 2011, sheet length: 3.100sheet thickness: 10,0total power requirements: 22weight approx.: 9800messurements (LxWxH): 4225 x 2250 x 2100New Price: approx. 58,000 EURO Lslsvfy S Eshccqlori Condition: Used, very good condition Technical Data: - Sheet thickness: 10 mm - Cutting length: 3100 mm - Cutting angle: 1.5° - Rear gauge: motorized, 1000 mm - Motor power: 22 kW - Length: 4,225 mm - Width: 2,250 mm - Height: 2,090 mm - Weight: approx. 9,800 kg Equipment: - Swing cut execution - NC preset control D-Touch 7 with touch screen for rear gauge, cutting length, piece counter, USB connection - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment - Cutting line lighting - Wide support table with glide balls - Piece counter - Single and continuous stroke - Foldable finger guard 1,000 mm - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy blade replacement and resharpening - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible - Oil filling - Light barriers at the rear of the machine - Qualified customer service - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 16,3messurements (LxWxH): 5350 x 2250 x 2250back gauge: 1000 Lrsljvfy S Sjhccqloi

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Ljlhccevap Thsqlsri Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 16cutting area width: 3200total power requirements: 22weight approx.: 10600messurements (LxWxH): 3800 x 1950 x 2080 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Ljlhccsvap Tnoqljri Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Lrelovap Tushccqloi Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition Ljlhsvaatfsccqljri

Condition: used, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550 Max. cutting length: 1550 mm side. Projection in column: 50 mm Sheet metal passage: 16 mm Cutting angle adjustable: 2°30 - 0.5° Lrolhccqsvaatlolei Empty strokes: 25 - 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil filling: 300 l Total connected load: 20.1 kW External dimensions: 2130 x 3260 x 2360 mm with - CNC control SIEMENS S 5 for numerical sheet metal bending - Holding up device mot. Scrap switch - Sheet metal removal with conveyor belt - Cutting gap and cutting angle with control programmable - Spare blades - Shear blade for 750 kg strength - Separate hold-down actuation, e.g. cutting after cracking - Hold-down pressure can be set and read from the front - 2 rocker stops - Finger protection with recessed grip - Balls in the support table - Angle stop with Norius -Foot switch used in good condition Price on request. Delivery: from warehouse or location free loading truck. Payment: in the case of takeover purely net or by agreement. Technical specifications are non-binding. Errors excepted.

Condition: used, length: 210width: 80heigth: 140sheet thickness: 3 Bending Machine Lslhcovaar Iecqljri - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 Specifications: Punching force            70 t Lrjlhccevaar Ujqloi Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Separate PT 700 / Leonard and Bauer Economic controller for positioning table for punching -Foot switch

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Darley System Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Bending Length: 2550 mm Downward Speed: 100 mm/s Max. Pressing Speed: 13.5 mm/s Return Speed: 75 mm/s Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Lslhsu Uwytjccqleri Oil Tank: 100 Liters

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg Lrolhsu Uwyyoccqlji - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front

Condition: new, stroke: max.450daylight: max. 900motor: 22performance of pump: 48oil filling: 90messurements (LxWxH): 2500x1200x2800weight approx.: 4000max. diameter: 330pressure: 300 Lrolhccjutuyveqlei

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400 Lrelhceutuy Ascqlji

Condition: new, motor power: 30performance of pump: 65oil filling: 150messurements (LxWxH): 3700x1500x3200weight approx.: ca. 5000Cylinder: Ø 400pressure: 500 Lelsutuy Nehccqlori

Condition: new, Year of construction: 2024, Diameter of the holes: 20 mmmessurements (LxWxH): 2480 x 1200 x 930-1003table width: 1200table length: 2250working height: 930 -1003plate thickness: 12 Product specifications welding tables - The size of the top is 2480mm x 1200mm - Round reinforcement edge of 140mm in height, provided with a two-row hole pattern. - The hole pattern is centre to centre 100mm by 100mm. - Provided with the necessary reinforcement ribs in width and length. - The material of the table is S355, stained and oiled. - The legs are fitted with ball joints and are adjustable in height. - The welding table is oiled and stained. This creates a smoother work surface and the table is less prone to welding spatter. Additional options: engraved lines:                       85¤  Hole diameter 16 mm:            80¤  Hole diameter 28 mm:            80¤  Diagonal hole pattern 50x50: 220¤  Lrolhcoukkrvscqlsi 4 adjustable wheels:               360¤ The welding tables with feet and castors are adjustable in height. Working height from 92 to 93 cm. The feet can be adjusted in height up to 10 cm more. A welding table with adjustable wheels has a minimum working height of 87 cm. You can adjust the rollers to a maximum working height of 100 cm.

Condition: new, Year of construction: 2024, Diameter of the holes: 20 mmmessurements (LxWxH): 1000 x 1000working height: 93-103 Lrolhccqjukkr Aelji Product specifications welding tables - The size of the top is 1000mm x 1000mm - Round reinforcement edge of 140mm in height, provided with a two-row hole pattern. - The hole pattern is centre to centre 100mm by 100mm. - Provided with the necessary reinforcement ribs in width and length. - The material of the table is S355, stained and oiled. - The legs are fitted with ball joints and are adjustable in height. - The welding table is oiled and stained. This creates a smoother work surface and the table is less prone to welding spatter.

Condition: new, Year of construction: 2024, Diameter of the holes: 20 mmmessurements (LxWxH): 2250 x 1000 x 1000table width: 1000table length: 2250working height: 93-103plate thickness: 12Medium welding table Product specifications welding tables - The size of the top is 2250mm x 1000mm - Round reinforcement edge of 140mm in height, provided with a two-row hole pattern. - The hole pattern is centre to centre 100mm by 100mm. - Provided with the necessary reinforcement ribs in width and length. - The material of the table is S355, stained and oiled. - The legs are fitted with ball joints and are adjustable in height. - The welding table is oiled and stained. This creates a smoother work surface and the table is less prone to welding spatter. Additional options: engraved lines:                       75¤  Hole diameter 16 mm:            80¤  Lslhccjukkr Njqleri Hole diameter 28 mm:            80¤  Diagonal hole pattern 50x50: 150¤  4 adjustable wheels:               360¤