Used automatic punching machines for sale (161)

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm Knodevuucwjpfx Ah Usf table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2005, functionality: fully functional, OMERA-ROSS 500-R2-M2P8 Eccentric Press Description: Capacity (Tons): 500 Table Size: 2300 x 1400 mm Ram Stroke: 300 mm Minimum Number of Strokes: 12-44 SPM Subtype DM Cdc: DM2B CE Marked: Yes Eccentric Drive Linkage System: Knuckle-joint flywheel with screw, eccentric type Ksdpfx Aoxfk E Ejh Ujnf Ram Width: 2300 x 1300 mm Ram Mounting: 200 mm Number of Pressure Points: 2 Number of Guides: 8 Ram Adjustment System: Guided wedge ball seat Daylight (Slide Opening): 1150 mm Side Window (Between Uprights): 1020 mm Weight: 66 tons (66,000 kg) Foundation Depth: 1000 mm Motor Power: 76 kW Electrical Panel Connections - Operation - Condition - To be overhauled Front/Rear Photocells: Yes Front/Rear Safety Guards: Yes Mechanical/Hydraulic Overload Protection: Yes Accessories / Other data: Compact Feed Line Presses 600x4 Motor Power: 76 kW Table Length: 2300 mm Table Width: 1400 mm Strokes per minute: up to 44 spm Distance between uprights: 1020 mm Total Weight: 66,000 kg

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 6603, Bruderer BSTA 25 (1983) – For Sale Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is fully operational and ready for immediate use. Available now and can be tested in Boxtel, Netherlands. Knodpfoxawcgox Ah Usf

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Knodjtvnlbepfx Ah Usf Control cabinet color RAL 7035 light grey

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Kodpfoinzdlsx Ah Ujnf Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: good (used), Year of construction: 2001, Kaiser Press V 160 WR Press force 1,600 kN Stroke adjustment 20 - 105 mm Ram adjustment 90 mm Strokes per minute 20 - 120 spm Press table 1,400 x 1,000 mm Drive power 22 kW Machine weight 24,000 kg Lorenz strip feeding line Knsdpfx Aext Ex Ajh Ujf Strip width up to 300 mm Load capacity 3,000 kg

Condition: used, Year of construction: 1996, pressure 130 t distance between columns 1220/1070 mm stroke 22 - 96 mm no. of strokes 20 - 120 Hub/min dayligth (stroke and adjustment up) 518 mm column travel -side 600 mm table surface area 1220 x 880 mm hole in the table 450 x 250 mm table height over floor 950 mm ram surface 1180 x 800 mm power requirement 22,0 kW Ksdpfx Aovuubysh Usnf weight of the machine ca. 17,50 t required space 3,7 x 1,75 x 3,55 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting

Year of construction: 1985, condition: excellent (used), Automatic punching machine with feeding line Table size 1240 X 1265 mm Knsdpfxom Twuvo Ah Usf Insert height 400 mm Ram adjustment 150 mm Ram area 1060 X 950

Condition: good (used), Year of construction: 1985, Bruderer BSTA 25 (1985) – For Sale Knsdpfexamv Asx Ah Ujf Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . Knodpfx Aexu T Eyoh Uof . Ongoing purchase of used German machines without NV or CNC control

Condition: used, Year of construction: 1996, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls - Roll feed BBV or optionally servo feeder available Stock image. Knedpjwu Rraofx Ah Ujf Please contact us for a detailed quotation!

Condition: good (used), table size: 350x350mm Kodpfx Aefm A Amsh Uenf

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request Kedevuua Nepfx Ah Ujnf

Condition: ready for operation (used), Year of construction: 1991, pressure 25 t stroke 7 - 62 mm no. of strokes 120-600 Hub/min Kjdpfjxiy Absx Ah Usnf total power requirement 4 kW weight of the machine ca. 2,5 t

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press PK No. 630 Knedpjwab T Eofx Ah Uef

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel Knedsxg Rvaopfx Ah Usf • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: good (used), Pressure: 25 t Knedpsfim Dwofx Ah Uef cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm Kodpfxsvut Uxe Ah Uonf hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot Ksdjv T Anlepfx Ah Ujnf • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: used, Year of construction: 1988, pressure 200 t stroke 30 - 160 mm no. of strokes 40 - 120 /min Kedpfx Asvut S Deh Uenf distance between columns 1500 / 1300 mm dayligth (stroke and adjustment up) 860 mm column travel -side 600 x 530 mm table surface area 1250 x 1250 mm hole in the table 550 x 300 mm table height over floor 1000 mm ram surface 1250 x 1000 mm ram adjustment 125 mm material width 30 - 500 mm material thickness 0,5 - 3,0 mm feed length 0 - 999,9 mm power requirement 50,0 kW Weight 34,00 t dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation Ksdpfx Aspvlf Sjh Ujnf - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: used, Year of construction: 1986, pressure 160 t stroke 20 - 120 mm no. of strokes 20 - 120 /min distance between columns 1300 mm column travel -side 520 mm dayligth 570 mm table surface area 1250 x 900 mm hole in the table 900 x 250 mm Kedevut Rtopfx Ah Ujnf table height over floor 1000 mm ram surface 1100 x 700 mm ram adjustment 100 mm material width 20 - 320 mm material thickness 0,3 - 4,0 mm feed length 1,0 - 9999,99 mm power requirement 18,5 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 3,0 x 2,3 x 3,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric centralized circular lubrication electronic roll feed make Kaiser type KWV 320 Z, yom 2000 with hydraulic intermediate lifting of the rolls

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW Knedpsvut Rgefx Ah Usf weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Knodpfsvut Ixjx Ah Uof Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm no. of strokes 30 - 300 Hub/min Knsdpfx Ahsvut Hue Uef dayligth (stroke and adjustment up) 400 mm column travel -side 350 mm table surface area 780 x 640 mm hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available