Used Automatic punching machines for sale (180)

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms Kodjxg Rvaopfx Ag Njnc • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: used, Year of construction: 1992, pressure 10 t Knjdpexh Szasfx Ag Nsc stroke 8-40 mm no. of strokes 120-600 Hub/min ram - range of adjustment 40 mm table surface area 380x240 mm ram surface 220x140 mm hole in the table 220x110 mm table height 910 mm tool hole in ram Ø 30 mm throat 135 mm weight of the machine ca. 1,2 t dimensions of the machine ca. BxTxH 1000x1500x2000 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Knsdpfx Agjwcxccj Nsc Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: excellent (used), Year of construction: 2020, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: KDH 1600, total height: 4,200 mm, feed length X-axis: 300 mm, ram adjustment: 120 mm, installation height: 751 mm, table height: 200 mm, total width: 2,200 mm, total length: 1,600 mm, drop-through hole in table: 250 mm, table length: 1,400 mm, table width: 1,000 mm, conveyor belt width: 400 mm, pressing force: 160 t, control cabinet height: 2,500 mm, control cabinet length: 5,000 mm, control cabinet width: 600 mm, type of input current: AC, stroke length: 110 mm, stroke adjustment: 100 mm, clearance between the columns: 1,500 mm, working width: 300 mm, input voltage: 400 V, distance between side stands: 600 mm, distance between stands: 1,500 mm, overall weight: 22,000 kg, control voltage: 24 V, product height (max.): 5 mm, year of last overhaul: 2024, pressure: 6 bar, sheet thickness steel (max.): 5 mm, compressed air connection: 6 bar, height adjustment type: hydraulic, punching force: 160 t, space requirement height: 4,200 mm, space requirement length: 13,000 mm, space requirement width: 2,500 mm, sheet thickness aluminum (max.): 5 mm, Press force: 1600 kN (at 60 strokes/min) Table size: 1500 x 1100 mm (W x D) Clamping area (table): 1400 x 1000 mm Clamping area (ram): 1400 x 1000 mm Installation height: 751 mm (stroke at bottom, adjustment at top) Stroke rate: 20–120 strokes/min, infinitely variable Stroke: 8–110 mm, automatically adjustable Ram adjustment: 120 mm (motorized) Features: - Equipped with servo technology, programmable ram speed - Table clamping plates are split and manually movable - 8-way slide guide - Motorized central oil lubrication - Automatic ram adjustment - Pneumatic ram weight compensation - Hydraulic stroke adjustment - Siemens S7 control system - Visualization via Siemens panel PC - Tool protection for 6 tools - Tool data storage (1000 entries) - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in the ram - Vibration-damping machine feet - Split table with 3 adjustable scrap bridges Ksdpsxiwzhefx Ag Nenc - Various 400V and 220V sockets configurable via the control (e.g. for conveyor belt) - 2 cams for rotary table - Feed adjustable electrically 120–275 mm - Strip lubricator adjustable via control - ERP connection/data transmission possible via LAN cable - The press is currently at the manufacturer’s site and will be retrofitted with an intermediate gearbox (if desired) Feed: - Rollers: 120 mm - Width: 400 mm - Length: unlimited - Pneumatic intermediate ventilation Strip lubricator by Raziol 400 x 80 mm, various rollers (frequency, quantity, and medium 1 or 2), control via S7 (on request, not included) Decoiler/Straightener (on request, not included): - Max. 5 tons - Outer diameter 1800 mm - Inner diameter 508 mm - Width: 400 mm - 7 rollers 90 mm with supports (Alligator 200 mm) - Controllable via S7

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Length 2200mm Kedpfxsv A Rq Te Ag Njnc Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm Kodpfx Agsvuk Hrs Nonc ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Knodov T Anlspfx Ag Noc Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: used, Year of construction: 2000, pressure 130 t no. of strokes 50-250 Hub/min sheet width 250mm mm stroke 8-120 mm ram - range of adjustment 100 mm table surface area 1600x800 mm ram surface 1600x800 mm Ksdpfxjxh Syps Ag Nonc hole in the table 1100x250 mm table height 1000 mm 370 mm weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm

Condition: good (used), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of construction: 1973 Type / Model: HR40NL Pressing force: 40 t Table: 650 x 385 mm ram: 350 x 190 mm Projection: 175 mm Distance table - bottom edge of plunger: 300 mm through hole: 350 x 130 mm Kodpfxsrdgnce Ag Nonc ram adjustment: 80 mm Plunger stroke: 0 to 70 mm adjustable Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness continuous stroke: mm Stroke rate: 40 to 180 /min Connection: 4 kW Accessories/equipment: Pliers feed Condition: good Weight: approx. 4 tons Machine dimensions: 1,400 x 1,800 x 2,250 mm

Condition: used, Year of construction: 2023, Milutensil L21-05537 Automatic Coil Feeder Press Line 300T; Including Milutensil Equipment: Colombo Press Mercurio 1 (300T-A); SFOC 10000 Decoiler; RMB 60.9.800 C Straightener; AE 125.800 Electronic Feeder; LRF110.800 Lubricator Knedpfx Agsw U N Npj Nec

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press PK No. 630 Knsdswab T Eopfx Ag Njc

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 2800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 2700 x 1200 mm Kjdpfjxcp Itsx Ag Njnc hole in the table 2450 x 450 mm ram surface 2700 x 800 mm Weight 80,0 t dimensions of the machine (WxDxH) 5,1 x 2,65 x 5,25 m

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment Kedpfx Aspvlf Sjg Nenc - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: new, Year of construction: 2025, pressure 75 t stroke 8-80 mm no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm table surface area 900x600 mm ram surface 900x470 mm hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t Ksdpfxexh Swuj Ag Nenc dimensions of the machine ca. BxTxH 1600x1200x2800 mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 95-1292, pressing force: 25 t, Schaal SEP 25 (1995) [25 ton] – For Sale Well-maintained Schaal SEP 25 from 1995 in good condition. The machine is in full working order and ready for immediate use. Knodpfoxawi Hex Ag Nec Available now and can be tested in Boxtel, Netherlands.

Condition: used, Year of construction: 1989, machine/vehicle number: 4588/23, Press capacity: 60 ton Ram stroke adjustable: 20 - 76 mm Slide adjustment: 80 mm Free frontal opening L-R: 650 mm Free lateral opening F-B: 260 mm Table surface area : 770 x 620 mm Slide area: 700 x 456 mm Hole in table: 600 x 250 mm Bruderer Double Roll Precision Feed: BBV 202/120 Ksdpfx Aexch D Tog Nonc Number of strokes: 70 -700 s.p.m. Dimensions L x W x H: 2.600 x 2.100 x 2.220 mm Weight of machine approx.: 7,5 ton Standard configuration clutch is overhauled Automation Bruderer feeder BBV 202/120

Year of construction: 1983, condition: used, machine/vehicle number: 1338-5, pression power: 30 t table siize: 500 x 700 mm stroke: 50 mm tappet boring: 40 mm breakdown hole in table: 100 mm Ksdo N Hcgspfx Ag Njnc total capacity needed: 380 V, 11 kW weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 3800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm Knjdpjxcp Imjfx Ag Noc table surface area 3700 x 1200 mm hole in the table 3400 x 450 mm ram surface 3700 x 800 mm Weight 110,0 t dimensions of the machine (WxDxH) 6,1 x 2,65 x 5,6 m

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min Knedpfx Aevu E I Dog Nec total power requirement 20 kW

Condition: used, Year of construction: 1988, functionality: unexamined, Bruderer BSTA 50 H with 2xBBV 202/120 no CE Contact us! Knodpfeuwl Iaox Ag Nsc

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 00-1564, pressing force: 80 t, Schaal SEP 80 (2000) [80 ton] – For Sale Well-maintained Schaal SEP 80 from 2000 in good condition. The machine is in full working order and ready for immediate use. Knsdpfx Asxawiaeg Njc Available now and can be tested in Boxtel, Netherlands.

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Knodpfxsxa Ef As Ag Noc Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm Ksdpfxevut N Aj Ag Nonc height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: used, Year of construction: 1980, pressure 25 t Kedpfxsvu E Iqs Ag Nenc no. of strokes 1500 Hub/min total power requirement 20 kW

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm Knsdpfxovuuf Sj Ag Noc hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition