Used hydraulic presses double column / four column presses for sale (200)

Condition: new, Year of construction: 2025, functionality: fully functional, The motorized hydraulic press P50MR guarantees high performance and maximum precision thanks to its robust structure, entirely laser-cut without welds in the areas of greatest stress. It is equipped with an immersion motor power unit 400 [V] 50-60 [Hz], a rapid approach and return pump calibrated to 20 [bar], plus an adjustable pressure pump with a handwheel to achieve the required power. It is also equipped with a maximum pressure valve with mechanical locking to prevent overpressure, and the pressure gauge (standard) allows for extremely precise calibration of the power output. Power: 50 tons Distance between inner uprights: 800 mm Approach speed: 1800 mm/min Working speed: 350 mm/min Rapid return flow rate: 26 l/min Slow return flow rate: 5 l/min Cylinder stroke: 300 mm Cylinder bore: 135 mm Rod diameter: 70 mm Dwsdpofvhqgefx Anzja Rod thread diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Frequency: 50-60 Hz Motor power: 3 kW Maximum absorbed current: 5.5 A Weight: 500 kg Dimensions: 1550 x 800 x 1965 (h)

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec Dwodpfsfxyh Aex Anzoa :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop Dedpfx Anoyz Dr Tszjwa - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: new, Year of construction: 2024, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, installation height: 400 mm, Equipment: safety light barrier, EXNER hydraulic double column press EX SLL 40 new machines year of construction 2024 pressing force: 400 kN Installation height: 400/450 mm stroke: 250 mm Dwjdpfx Anjuv Hm Ijzsa Table (width) 700 mm Table (depth) 450 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressing force: 20 t, stroke length: 150 mm, table width: 800 mm, table length: 500 mm, installation height: 400 mm, hydraulic double column press Schoen UTE/B20 year 2000 used control Siemens S 7 pressing force: 200 kN Dwedpfx Aet Dzpfsnzea Installation height 400 mm stroke: 150 mm table width: 800 mm Table depth: 500 mm

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Dedpfx Aevw Spmsnzswa Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Dsdpfsxfl Axox Anzswa Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Dwedpfxsy Nbtke Anzja Separate hydraulic power unit Control panel

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Dedpjy H Ibvjfx Anzewa Post-travel: max. 10 mm Motor power: 3 kW

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Weights Stand: 47.1 T Table: 8.84 T Dedogrnaqopfx Anzjwa Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Dedpfxev Hqnao Anzowa Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height Dodpfx Anjx Ry Nyezewa • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Dwodpfxsyxhq Ij Anzoa Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing Dedeyxhp Depfx Anzswa - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working Dwodpfx Ajd E U Nnonzea • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Dodpouw S A Dofx Anzjwa Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm mech. depth stop

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Dsdpfxeup Si He Anzjwa Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Dwsdpfxeup Skws Anzsa Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, total length: 1,900 mm, total width: 3,400 mm, total height: 4,600 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Dedpfxjyv A Ipo Anzewa Herblitz feed: Max. material width: 550 mm Max. material thickness: 6 mm Siemens control SPS7, 1500F

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Dodpfx Anjhgiwnozowa Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: used, Year of construction: 1993, Force: 100 tons Max. distance between columns: 1400mm Stroke: 250 mm Windows: 400mm Daylight: 400mm Table: 1250x1100mm Ram: 1250x1100mm Speed fast down: 400mm/sec. fast uo: 330mm/sec. work: 24-43 mm/sec. Power: 33kW Weight: 10.000 kilos Height: 3300mm Width: 1700mm Dwedjc Uwx Dspfx Anzea Depth: 1800mm 2-Hand operation Cutting dampers

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Dedpetiwgiofx Anzswa

Year of construction: 1988, condition: good (used), Force: 160 tons Windows: 600mm Daylight: 750mm Table: 1400x900mm Ram 1400x900mm Speed down 400mm/sec. up 300mm/sec. work 19-50mm/sec. Stroke: 400mm Dsdpfx Anod Rlm Rjzswa Requested power: 45 KW Weight 23 tons Height: 4300mm Machine is floorstanding Siemens S5 control 3 cushions in bed

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment Dedpfjguvtlsx Anzowa - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons Dwodpfx Asdzqptsnzea The machine was used for straightening heated steel flanges. From insolvency – in good condition.