Used laser cutting machines for sale (353)

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Highly dynamic and precise CNC laser machine solid polymer concrete machine body cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end Dkjdpfsyvfuwjx Ag Rok beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen Dodpfjywwrfex Ag Rskk • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Dkedpfx Agoywwq Us Rok Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 56,409 h, machine/vehicle number: A0235A0225, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: SINUMERIK, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, overall weight: 9,000 kg, total length: 9,200 mm, total width: 3,200 mm, total height: 2,300 mm, warranty duration: 2 months, Equipment: cooling unit, dust extraction, emergency stop, Working area 3,000 x 1,500 x 115 mm Control system Siemens Sinumerik 840 D Laser power 4,000 watts Max. sheet thickness (mild steel): 20 mm Dksdpfxsxx Ddnj Ag Rok Max. sheet thickness (stainless steel): 15 mm Max. sheet thickness (aluminum): 10 mm Year of manufacture: 2008 STANDARD EQUIPMENT: - Enclosed machine frame with integrated CO2 laser unit TruFlow 4000 including NitroLine, beam pipe ventilation with N2 and LensLine, cooling unit - Additional high-dynamic Xp-axis - Motion unit for highly accurate processing - Drives with maintenance-free three-phase servo motors - Enclosed beam guidance - Automatic pallet changer with longitudinal conveyor - Laser logbook function - Laser cutting head with 5” lens - Laser cutting head with 7.5” lens - Quick-change system for cutting heads Programming - Programmable cutting gas selection / pressure control - Programmable power cycles - Automatic sheet outer edge detection - ControlLine - FocusLine Plus - Laser power control - Positioning laser diode - NitroLine - Microweld - PlasmaLine - ContourLine - SprintLine - Spray device - Auto shut-off - Work area lighting - Siemens SINUMERIK 840D control: open control, PC-based, user-friendly operation, USB interface, online help, diagnostic functions, maintenance logbook, RJ45 network connection, 3.5” floppy drive, TFT color display - TruTops laser lite workshop programming - CE marking - Safety devices: multi-beam light barriers, multi-chamber extraction, compact dust extractor and machine enclosure with Makrolon panels Reason for sale: We have purchased a new machine. Turbine completely overhauled in 2024 HF tube almost new Control board almost new

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Quickset, year 2014, was in operation with a TP3000 system Dodpfx Agjyybd Rj Rekk

Condition: used, Year of construction: 2010, Laser cutting machine Manufacturer: Eurolaser Model: LCS XL-1600 Year of manufacture: 2010 Dkedpfx Agjyvk R Ee Rok Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous application: Cutting of acrylic glass Laser source was replaced 5 years ago 18326

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 908, laser power: 3,200 W, travel distance X-axis: 1,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 600 mm, No minimum price – guaranteed sale to the highest bidder! Bids are binding and require collection within the period from 08/04/26 to 16/04/26! TECHNICAL DETAILS X-axis travel: approx. 1500 mm Y-axis travel: approx. 4500 mm Z-axis travel: approx. 600 mm Laser power: 3.2 kW Table dimensions: 3500 x 2000 mm MACHINE DETAILS Lifting device model: TRUMPF LOADMASTER Number of suction units (lifting device): 12 Lifting device features: Light barrier system Dodpeylalvsfx Ag Rokk Dimensions & Weight Dimensions (L x W x H): 12000 x 7000 x 2400 mm Machine weight: 15 t EQUIPMENT Shuttle table Additional laser head Accessories Note: The laser cutting system can be transported on trucks up to 3000 mm wide and therefore does not require a special permit. External reference: 18

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Dksdpfxjx Rn Tmj Ag Rek Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Dkjdpfxoyut Dkj Ag Rek

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,000 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: 840D, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 170 mm, pipe length (max.): 6,500 mm, power: 2 kW (2.72 HP), Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, Maximum round tube diameter to be machined: 170 mm Maximum square profile to be machined: 120 x 120 mm Maximum rectangular tube to be machined: 150 x 100 mm Minimum tube diameter to be machined (automatic): 20 mm Minimum tube diameter to be machined (manual): 12 mm Shortest tube length to be machined: 185 mm Minimum wall thickness to be machined: 0.8 mm Maximum wall thickness to be machined (2 kW laser, mild steel): 8 mm Maximum wall thickness to be machined (2 kW laser, stainless steel): 4 mm Maximum wall thickness to be machined (2 kW laser, AlMg3): 6 mm Repeatability: ± 0.05 mm Maximum profile length: 6500 mm Minimum profile length for automatic loading: 3000 mm Discharge length (standard): 4000 mm Djdpfx Agoyk Slxj Rokk Maximum profile weight: 37.5 kg/m Maximum loading capacity: 3000 kg Possible profiles for loading: round, square, rectangular, elliptical Dimensions (L/W/H): approx. 16,000 x 7,400 x 2,364 mm Weight: approx. 20,000 kg Standard equipment: • Control: Siemens Sinumerik 840 D • Precitec autofocus Procutter cutting head F 150 (Focus) • Control cabinet air conditioning • Manual loading • Manual unloading • Laser positioning diode • Centralized lubrication unit • Disposal box for small parts • Illuminated cutting area • CE certification Additional features: • IPG laser source 2 kW • Vanterm compact filter system • Automatic loading system (6500 mm) • Unloading unit (6000 mm) • Discharge conveyor, incl. small parts conveyor (to the rear) • Automatic weld seam detection • Automatic real-time measurement system for centering chuck • Calcium carbonate dosing unit Please contact us for further information on this machine.

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 87,524 h, machine/vehicle number: 9312, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser power: 3,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, table length: 3,080 mm, table width: 1,740 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,740 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 300 m/min, feed rate Y-axis: 300 m/min, feed rate Z-axis: 300 m/min, cutting speed: 300 mm/min, positioning speed: 3,000 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, workpiece weight (max.): 230 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, compressed air connection: 6 bar, overall weight: 23,000 kg, total length: 8,000 mm, total width: 8,000 mm, total height: 2,400 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Immerse yourself in the world of high-precision metalworking with the TRUMPF Trumatic 600L punch and laser combination machine. Delivering an impressive 3 kW of power and featuring a working area of 3080 mm x 1740 mm, it handles even the most demanding tasks effortlessly. Manufactured in Germany in 2000, this machine is renowned for its robustness and reliability, accommodating sheet thicknesses up to 8 mm and operating at speeds of up to 300 m/min. The hydraulic pressure of 22 bar ensures precise punching results. With comprehensive accessories and user-friendly CNC controls, you are perfectly equipped to tackle any challenge. Dsdpfx Ageym Rwro Rjkk

Condition: excellent (used), Year of construction: 2018, laser wavelength: 1,030 nm, power: 5 kW (6.80 HP), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Dkjdsr Izwmspfx Ag Rjk Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 2: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 4: ≥ 4mm x mrad, ≥ 100µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection set: yes Ethernet in user area: multiple Number of occupied fiber links (LLK): 4 Number of intelligent optics: 4 Number of active couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with annex

Condition: new, functionality: fully functional, Year of construction: 2026, ACCURL Master Line X – Fiber Laser for Modern Industrial Production Dodpfxsyhn T He Ag Rekk The ACCURL Master Line X is a powerful and versatile fiber laser cutting machine designed for high precision, stable operation, and efficient production. Built to European standards, this machine is tailored for industrial companies with stringent demands on quality, repeatability, and operational reliability. The robust construction is engineered for continuous production, maintaining accuracy even at high speeds. The Master Line X is well-suited for cutting both thin and thick materials, handling steel, stainless steel, aluminum, and other common industrial materials with high precision. The machine can be equipped with modern control systems and automation solutions, making it easy to integrate into existing production workflows. The result is stable and efficient laser cutting that supports increased productivity and consistent quality in every component. The ACCURL Master Line X is an excellent choice for companies seeking a reliable fiber laser for professional use, where quality, performance, and long-term operational efficiency are of utmost importance.

Condition: like new (used), Manufacturer: FANUC Corporation Dsdpsyt Db Djfx Ag Rjkk Model: FF4000i-A Machine type: Fiber laser Laser power: 4 kW Laser technology: Fiber laser Manufacture date: June 2016 Power supply: 200 V / 220 V Frequency: 50 / 60 Hz Rated power: 28 kVA Rated current: 16 A Short-circuit current: 5 kA Country of Manufacture: Japan Accessories: Transformer FANUC LX80L-0003-0611 Transformer power: 30 kVA Primary voltage transformer: 400 V ±5 % Secondary voltage transformer: 200 V Transformer frequency: 50 / 60 Hz Transformer weight: 125 kg Standard: EN61558-2-13 Scope of delivery: Laser source, transformer, two fiber optic cables Location: Fulda The laser has only been used as a demonstration unit at a trade fair in 2018, therefore very few operating hours.

Condition: used, Year of construction: 2018, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 163880, type of input current: AC, sheet thickness steel (max.): 22 mm, overall weight: 3,500 kg, input voltage: 400 V, cutting speed: 1,300 mm/min, total width: 2,000 mm, total height: 2,000 mm, total length: 4,000 mm, table height: 900 mm, table length: 3,000 mm, power of the servo motor: 20,400 W, compressed air connection: 10 bar, table width: 1,500 mm, cutting current: 105 A, input frequency: 50 Hz, For sale is a plasma cutting system with Hypertherm Powermax105. The system operated flawlessly until the end of its use. Due to a new purchase, this machine is now being sold. Dksdpfx Aow Dz Tmjg Rek

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Dsdoytd Scopfx Ag Rokk Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€

Condition: used, Year of construction: 2009, Technical details: Dkjdpfx Agsyuvcie Rjk Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 2013, Trumpf TruLaser 5030 Fiber with Double Tower Storage System - Laser Cutting Machine - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of manufacture: 2013 Equipment - Working area: 3000 x 1500 mm - Enclosed machine frame - Integrated cabinet - Automatic longitudinal pallet changer - Torque drive combined with linear direct drive - Enclosed beam guidance via fiber optic cable (LLK) - Chiller unit (water/air) - Integrated electrical cabinets with internal lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning Trumpf Laser - LLK according to standard layout (laser directly next to the machine) - Laser chiller unit (water/air) - Excitation via pump diodes - Laser power control - Laser log function Cutting Unit - Universal cutting unit with fully adaptive lens system - Cutting head strategy - Protective glass against lens contamination - State monitoring of the protective glass - ControlLine: height control and sheet edge detection Control - Simple workshop programming - Advanced workshop programming - Fast reproduction - Sinumerik 840D SL control - 17" color touchscreen - Integrated technology database - Automatic shutdown - Programmable selection of cutting gas/pressure - FastLine - FlyLine Safety - CE marking - Light barriers - Multi-chamber extraction system - Integrated compact dust extractor - Fire detection system in dust extractor - Machine enclosure with certified viewing window / right-hand door - Electric roll-top roof Dksdpfx Ageym Umkj Rsk LiftMaster Compact - Basic unit with synchronous loader, peeling device and sheet thickness gauge, movable destacking rake, incl. loading/unpacking station - Low-scratch, precise unloading (includes stainless steel rake with belt tines, tine spacing 67 mm; up to s= 15 mm) - Cleaning brush for support bars - Separation of thin sheet for synchronous loader (0.8 - 2.0 mm) TruStore 3030 Double Tower Storage System - Base module 3000 x 1500 mm - Integration of LiftMaster Compact - Storage compartment extension for LiftMaster Compact - 2 × extension module 1.9 (for max. 9 storage compartments, loading height 90 mm, without pallets, module height 1980 mm) - Storage and retrieval device - Extension of storage and retrieval device for extension module - 34 storage compartments 90 mm, incl. pallet - 10 pallet bases

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, 10,000 Watt Fiber Laser with only approx. 3,000 cutting hours Upgrade to new laser cutting head scheduled for 05/2025 Immediately available Manufacturer: BYSTRONIC Model: BySmart Fiber 3015 Year of manufacture: 2022 Sheet size: Large format; 3,000 x 1,500 mm Operating hours: approx. 3,000 h cutting time, approx. 9,000 h total runtime Maximum sheet thickness (cuttable): Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Special equipment: - Automatic nozzle changer with 64 positions - Detection Eye - Beam Shaper - Netbox (router) - Second high-pressure cutting gas channel - Ready for N2 generator - Dust extraction system with drum - Control cabinet position: top left - Upgrade to latest Bystronic laser cutting head scheduled for 05/2025 Technical Data: - Cutting area: (X) 3,106 mm, (Y) 1,582 mm, (Z) 100 mm - Max. axis-parallel positioning speed: X/Y 100 m/min - Max. simultaneous positioning speed: 140 m/min - Bi-directional repeatability of axis positioning: R (per ISO 230-2:2014) 0.05 mm - Mean bi-directional positional deviation of axis: M (per ISO 230-2:2014): 0.1 mm - Edge detection accuracy: +/- 0.5 mm - Max. workpiece weight: 1,100 kg - Max. permissible workpiece weight on both shuttle tables: 1,850 kg - Fiber laser source 10000 with 10 kW laser power (adjustable 1,000-10,000 W) - Shuttle table changeover time: 27 seconds - Electrical consumption of complete system (incl. extraction, chiller): *18 kW (average) - Machine weight (without extraction/chiller): 11,800 kg - Machine dimensions: Length: approx. 10,495 mm, Width: approx. 6,903 mm, Height: approx. 2,880 mm Standard equipment: - Spot Control - Crossjet - Collision detection - Automatic nozzle centering - ByPos Fiber - Cut Control Fiber - Piercing Jet - Nozzle cleaning - Laser diode pointer - Scanning - Cutting bridge - Shuttle table - Laser source - Chiller - Tank heater - Machine control and operator interface Dodpfxsywk Hce Ag Rokk - Uninterruptible power supply - Condition Messenger - Maintenance Messenger - Cut plan editor - Restart Manager - System Manager - OPC Interface Cutting - Handheld controller - Power supply 400V / 50Hz - Electrical connection - Compressed air (machine, laser source, chiller, extraction, cutting gas) - Material specification - Environment This used machine can be inspected under production conditions. All information provided without guarantee – sale excludes any warranty or guarantee. Subject to prior sale.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system Dkjdpfsyh A Nyox Ag Rek · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Press force: 85 t Bending length: 2750 mm Upright width: 2260 mm Total power requirement: 17 kW Machine weight approx.: 8,300 kg Space requirements approx.: 3800 x 2300 x 2400 mm Accessories/Equipment: Dksdeyvhzuepfx Ag Rsk - 2 support arms in front of the machine - 2 backgauge fingers - Light barrier in front of the machine - Safety guard at the sides and rear of the machine - Die shift - 6-axis backgauge - Trumpf TASC 6000 control - Wila tool holder - Operating hours: 75,000 h

Condition: ready for operation (used), Year of construction: 2023, This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Additional equipment • Laser with 8kw and chiller • Open Cabin with right and left side accessible doors • Safety glasses on the doors • NIGHT Cut for safer cutting and piercing process • SMART Cut for faster processing of thin material • MAX Cut for piercing process time reduction for thick material • Gas Mixer Cut • Nozzle check and OPC by camera Djdpjx D Ebrofx Ag Rekk • Adaptive cut • ATC automatic tip changer with 20 nozzle stations Machine Benefits Technical Machine Benefits • Dust collector for high production (3200m3/h) with 6 cartridges • Automatic selector for additional cutting gas • Uninterruptible power supply (ups) • Fleet manager remote care via tosibox • Interface to nt or automation connection • Interface for psr 2d Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2017, product length (max.): 6,040 mm, number of axes: 3, This 3-axis LVD Phoenix fiber laser cutting machine was manufactured in 2017. It features a cutting length of 6040 mm, width of 2040 mm, and can handle material thickness up to 20 mm. Consider the opportunity to buy this LVD Phoenix fiber laser cutting machine. Contact us for more information about this machine. Dedpfx Agoycvmkj Rekk • Width: 2040 mm • Thickness: 20 mm • 2023: new Generation 3 laser head (original price €35,000)

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: BECKHOFF, controller model: n/a, overall weight: 35,900 kg, number of axes: 5, This 5-axis NUKON Fiber Laser Extreme 30250 was manufactured in 2021. It features a 12 kW fiber laser, Beckhoff CNC control system, and a maximum sheet size of 2,500 x 12,000 mm. The machine supports speeds up to 50 m/min and includes a servo drive system. Consider the opportunity to buy this NUKON Fiber Laser Extreme 30250 fiber laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Noise emission: 60 db • Control system: beckhoff cnc • Display: 19" tft standard screen • Control console: all functions can be controlled from the panel • Interface: ethernet • Drive type: servo Dksdpsx U Ur Dsfx Ag Rjk • Repeatability: ± 0. 35 mm (over 500 mm) • Rotary axis (rotational axis): 160 rpm • Acceleration (x, y, z): 1. 5 g • Positioning accuracy: ± 0. 35 mm (over 500 mm) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,265 h, laser power: 5,000 W, This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Trulaser 5030 (l56) documentation • Machine software • 1 additional postprocessor • Trutops laser programming course Extra Information General Data Machine: Closed machine frame Dodpfex D Hg Aox Ag Rokk Torque drive combined with linear direct drive Closed beam guidance via fiber optic cable (LCC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 17* touch color screen Wide longitudinal conveyor belt TruDisk power supply via the machine Work area lighting Positioning Laser Guides: Spray direction PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Coupler cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device TRUMPF Laser: TruDisk 3001 solid-state laser with one LLK output Fiber optic cable according to standard layout Laser cooling unit (water-air) Excitation via Pump diodes Laser power control Subject to international export controls according to EC Dual-Use Regulation 428/2009 (lasers covered by 6A005) Cutting Head: Universal cutting unit with fully adaptive lens system Single-head cutting strategy Protective glass to protect against lens contamination ControlLine: Height control and outer sheet edge trimming Control: SINUMERIK 840D SL control system Simple and advanced workshop programming Fast re-production Integrated technology data Automatic shutdown Programmable cutting gas/pressure selection FastLine, FlyLine, AdjustLine Data Transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified safety glass, door on the right Electric retractable roof Voltage and Frequency: Voltage: 400 V Frequency: 50 Hz Color: Standard white - blue RAL design 250 20 20 - blue NCS S 0505 RBOB - white Solid-state Laser: TruDisk 5001 with 1 air cooler outlet Additional Features: Nozzle changer BrightLine fiber DeteciLine: Precise sheet position detection Clamping clamps (2 pieces) Integrated camera (Full HD) for process monitoring with monitor interface Individual oil feed into the network ClitMaster Gompact retrofit capability