Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 Cjdpfx Aaoywyq Deasra • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE • Electrical: 440 V, 3 phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power on time: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, wash gun, LED work light, fully enclosed working area • Condition: very good condition, low operating hours, well maintained Cjdpoywv Tnsfx Aaajra Additional equipment • Machine vise • Touch probe Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 40, This 5-axis LGB KX45 SQUARE FIVE 2 vertical machining centre was manufactured in 2012. It features a moving table of 1480 x 1440 mm, a Heidenhain ITNC 530 control, and a high-speed capability of 18,000 rpm with HSK 63A. Additional highlights include a chip conveyor, a Renishaw tool filler, 40 tool places, and an IKZ 40 bar with a cooling unit. For more information about this vertical machining centre, please reach out to us. Additional equipment • Electronic handwheel HR 420 • Renishaw tool filler • Cooling unit • MFE 28 filter unit • Laser tool measuring system Crjdpfxjywvrwo Aaasa Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2007, Machining center Seiki Center VK1100MC, year 2007, CNC FANUC. In very good condition, with complete documentation and video. Good deal. Crodpsyxniqefx Aaaja

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: Ultimax 4 CNC, table width: 510 mm, table length: 1,220 mm, table load: 750 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, This 3-axis Hurco VMX40 vertical machining center was manufactured in 2001. Consider the opportunity to buy this Hurco VMX40 vertical machining center. Contact us for more information. Codpfjywkvwsx Aaaera Additional equipment • Tool Changer: Automatic with 24 positions

Condition: used, Table: 1200 x 540 mm X Axis: 1020 mm / Y Axis: 540 mm / Z Axis: 530 mm Z Clearance: 150 ~ 680 mm Table Load Capacity: 1000 kg Crsdpfx Aajyxnk Ijaea Spindle: 8000 rpm Spindle: ISO 40 / 15/11 kW Automatic Tool Changer: BT40 Tool Holder / 30 Tools Machine Weight: 7,000 kg

Condition: used, Year of construction: 2011, Technical details: travel -x axis: 1000 mm travel -y axis: 500 mm travel -z axis: 610 mm turning speed range: 12000 1/min control: HEIDENHAIN iTNC 530 tool change unit: 40 Pos. Tool bore: SK 40 table-size: 1.200 x 500 mm max. table load: 850 kg total connected load: 37 kW weight: 6,8 to. space requirements approx. LxWxH: 2,65 x 2,1 x 2,9 m vertical machining center, internal coolant supply 20bar, Crodpfx Aajyxrc Usaoa airblast through spindle, direct measuring system, prepared for 3D-touchprobe (M&H PS 25.00), chioconveyor NC-dividing device LEHMANN EA 520 L MA (center height 180mm) approx. 26.000h "machine on", approx. 7.500h "spindle on" *

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, Crjdpfjyia Upex Aaaja through spindle coolant, swarf conveyor, Fanuc i series control.

Condition: excellent (used), Year of construction: 2001, Mazak 3-axis vertical machining center in very good condition. About 8500 spindle hours and was only used for light work (machining Aluminium). Machine can be inspected under power upon appointment. Immediately available for delivery. Cjdsywhbkspfx Aaasra Including: High pressure pump - 15 bar cooling through spindle Chip conveyor FH 3D probe Control Mazatrol Fusion 640M Max spindle speed 10000 rpm X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 60 positions Table length 2000 mm Table width 760 mm Table load 1400 kg Machine weight 10500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, CNC vertical machining center "KUNZMANN BA 1000 SK" Equipped with Heidenhain iTNC 530 path control. Credpfeyx Ua Ajx Aaasa Year of manufacture: 2013 Travel ranges: X 1020 mm, Y 620 mm, Z 920 mm Spindle speed range: 1 – 14,000 rpm, stepless With the following accessories: - Fixed angular table, 1200 mm x 610 mm clamping surface - NC attachment rotary table WALTER, diameter 500 mm - B-axis swivel head (torque drive), +30 / -120 degrees - Vertical tool changer with 40 magazine positions (SK 40) - 3D Heidenhain touch probe - Electronic handwheel - Fixed full enclosure with internal lighting - Coolant through spindle (IKZ system) - Coolant system - Oil mist extraction - Chip conveyor - Operating manual

Condition: used, YOM 2004 Codpfx Aev Ax Uyjaaera Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 430 mm z-travel 510 mm control Mazatrol Smart table surface area 900 x 430 mm max. table load 500 kg number of spindle speeds 40-12000 U/min rapid speed 42000 mm/min tool magazine with 30 Plätzen max. tool diameter 125 mm weight of the machine ca. 4800 kg Just 4,362 hours of pure machining! Capacity: External dimensions of the machine table: 900 x 430 mm Travel range X/Y/Z axis: 560/430/510 mm Distance from spindle head to table surface: Min: 150 mm Max. 660 mm Spindle: Crodoyukgiepfx Aaaoa Spindle speed: 40-12000 (two electrical stages) Feed rate: Rapid traverse speed: 42000 mm/min Cutting feed rate: 1-8000 rpm ATC magazine: Tool magazine slots: 30 Tool shank type: MAS BT-40 Max. tool diameter: with adjacent tools: 80 mm without adjacent tools: 125 mm Max. total weight of tools in magazine: 120 kg Equipment/accessories: Coolant system Vices (not shown in the photo) Tool holders Tools Documentation

Condition: used, Year of construction: 2007, controller model: Ultimax, table width: 355 mm, table length: 760 mm, number of slots in tool magazine: 20, HURCO VM1 Vertical Machining Center The HURCO VM1 is a compact vertical CNC machining center, ideally suited for precise milling operations in single-part and small-batch production. The machine stands out for its robust construction, user-friendly control system, and efficient tool changing capability. Technical Equipment Worktable: 760 mm × 355 mm Equipped with machine vice CNC control: Ultimax Automatic tool changer with 20 tool positions Machine Condition and Design Crjdpfeyxcykjx Aaaoa The machine features a fully enclosed safety cabin with large front windows. The control panel, including a display, operation keys, and emergency stop, is mounted on the side for ergonomic access. A chip collection tray is located beneath the working area. Thanks to its compact footprint, the HURCO VM1 is especially suitable for workshops with limited floor space, while still delivering high performance and flexibility.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI path control Year of manufacture: 2013 Travel distances: X 300 Y 250 Z 250 Spindle speed range: 60 – 15,000 rpm, stepless Including the following accessories: Rigid angle table, 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine slots (SK 30) Various tool holders (SK 30) Dual pallet changer Codpfxoyx H Nvj Aaaora 4 pcs. Allmatic vices, jaw width 100 mm Electronic handwheel Full safety enclosure with sliding doors and interior lighting Coolant unit with paper band filter Coolant system 2-color signal light Chip conveyor 6 pcs. machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 610 mm, overall weight: 5,500 kg, Fanuc 18I-MB; Golden Sun divider – 4th axis; BT40 spindle, 10,000 rpm; 24-position tool changer; travels 1000 x 580 x 610 mm. Csdoyfwg Djpfx Aaaora

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Codpstuggcjfx Aaasra Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: good (used), Year of construction: 2016, Vertical Machining Center Machine type: MTCut MVY150H Control: Heidenhain iTNC 530 SmarT.NC Year of manufacture: 2016 Spindle operating hours: 7,140 h Power-on hours: 21,774 h New spindle Codpfx Aex Uqrgjaaora TECHNICAL DATA: Travel distances: X-axis: 1,500 mm Y-axis: 700 mm Z-axis: 810 mm Rapid traverse (X/Y/Z): 68 m/min. Max. spindle speed: 18,000 rpm Torque: 162 Nm Drive power: 34 kW Tool holder: HSK 63 Tool stations: 40 Table size: 1,500 x 800 mm Features: Chip conveyor Through-spindle air Electronic handwheel Chip flushing gun Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe: TS460

Condition: good (used), Year of construction: 1998, functionality: fully functional, Okuma MX 55, year of manufacture 1998, OSP - U 100 L control, travel X/Y/Z 1050/560/450 mm, rapid traverse X/Y/Z 40 m/min, max. table load 700 kg, table size 1300 x 560 mm, spindle speed up to 6,000 rpm, 20-position tool changer, BT 50 taper, through-spindle coolant 20 bar. Two years ago, the milling spindle was overhauled and the axis drives were renewed. Credpsyx Stmsfx Aaaoa

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 7,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details. • Control system: MMI CNC control • Operating system: Windows OEM software • Number of controlled axes: 4 (maximum configurable axes: 5) • C-axis rotation: 180° (-90° / +90°) • Drive system: Servo motors • Axis control: CNC controlled Crodpfx Aaoyv H Nksaoa • Spindle type: Electrospindle • Tool magazine capacity: 11 positions • Maximum tool diameter: 200 mm • Maximum tool length: 150 mm • Maximum X-axis feed speed: 80 m/min • Maximum Y-axis feed speed: 60 m/min • Maximum Z-axis feed speed: 40 m/min • Voltage: 400 V (tolerance ±10%) • Frequency: 50/60 Hz • Total power consumption: approx. 7.2 kVA • Maximum current: approx. 18 A • Compressed air pressure requirement: approx. 6 bar • Machine structure: Steel machine frame Technical Specification Taper Size ISO 30

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Operating hours: 1,495 h • Travels: • Rapid traverse (X/Y): 36 m/min • Rapid traverse (Z): 30 m/min • Spindle: • Torque: 117.8 Nm • Taper: CAT 40 • Table: • Size: 1300 × 570 mm • Tooling: Crsdpfxeyv Ezro Aaasa • Tool changer: 30 positions

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total width: 3,000 mm, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, product length (max.): 4,000 mm, number of axes: 3, This 3-axis FAGIMA FAST 160 was manufactured in 1999. It features an X-axis travel of 1600 mm, Y-axis travel of 700 mm, and Z-axis travel of 700 mm. The machine includes a table size of 1800 × 700 mm with a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the FAGIMA FAST 160 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1800 × 700 mm • Spindle: • Torque: 75 Nm • Feed rates: • Rapid X/Y/Z: 20,000 mm/min • Cutting feed: 1 – 10,000 mm/min • Tooling: • Tool changer: 38 positions Cjdpfxsyv Df Ns Aaasra Additional information: • Machine overhauled in 2016

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Johnford SV-41 was manufactured in 2010. It features a maximum spindle speed of 15,000 rpm and a work envelope of 1050 x 610 x 510 mm. The machine is equipped with a 40 taper for versatile tooling options. If you are looking to get high-quality machining capabilities, consider the Johnford SV-41 vertical machining centre we have for sale. Contact us for further details. Cjdpfsyv A Txox Aaajra • Spindle taper: 40 taper

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, total height: 2,200 mm, total width: 2,300 mm, table load: 400 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, tool weight: 7,000 g, product length (max.): 2,305 mm, number of axes: 3, This 3-axis DART VMC650 XL/A T.S was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1000 × 500 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the DART VMC650 XL/A T.S vertical machining centre we have for sale. Contact us for further details. Csdpfxjyv A Rwo Aaaera • Table: • Size: 1000 × 500 mm • Feed rates: • Rapid traverse X/Y: → 30 m/min • Rapid traverse Z: → 20 m/min • Cutting feed: 1–2000 mm/min • Axes / Drives (feed motors): • X: 1.8 kW • Y: 1.8 kW • Z: 1–3 kW • ATC (tool changer): • Tool capacity: 24 • Max tool diameter: 100 mm (adjacent tools) / 200 mm (no adjacent) • Max tool length: 200 mm Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 450 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 12,400 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 130 mm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production—see the videos of the machine operating prior to disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machining center, designed for precision manufacturing in industries where complex geometries and exact tolerances are crucial. Included: - KNOLL FKA/500 band filter system + 3 filter rolls. - Filtermist FX5000 coolant mist extractor. - Renishaw OMP60 3D probe. - Chip conveyor - Spindle cooler - Original Mori Seiki tool holder block. - Original documentation + electrical diagrams. Crjdjyq Emiopfx Aaaoa This Mori received a new spindle some time ago, which has only seen limited operating hours since. Report available!

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 4,500 kg, Heidenhain TNC 426 travels 800X500X500 mm table 800X500 mm BT 40 Crjdeylhybspfx Aaaoa tool changer